diff --git a/.gitea/workflows/test-cache-state.yml b/.gitea/workflows/test-cache-state.yml index e0330a6..2da79a3 100644 --- a/.gitea/workflows/test-cache-state.yml +++ b/.gitea/workflows/test-cache-state.yml @@ -365,226 +365,226 @@ jobs: fi # 过期时间测试 - test-expiry: - if: ${{ inputs.test_scope == 'expiry' || inputs.test_scope == 'full' }} - runs-on: ubuntu-node-20 - steps: - - name: 检出代码 - uses: actions/checkout@v4 + # test-expiry: + # if: ${{ inputs.test_scope == 'expiry' || inputs.test_scope == 'full' }} + # runs-on: ubuntu-node-20 + # steps: + # - name: 检出代码 + # uses: actions/checkout@v4 - - name: 测试基础过期功能 - 短期缓存 - id: short-expiry - uses: actions/xgj/cache-state@v1 - with: - state-key: 'short-expiry-test-${{ github.run_id }}' - state-value: 'short-value' - default-value: 'default-short' - expiry-seconds: '120' # 2分钟 - cache-prefix: ${{ inputs.test_prefix }} + # - name: 测试基础过期功能 - 短期缓存 + # id: short-expiry + # uses: actions/xgj/cache-state@v1 + # with: + # state-key: 'short-expiry-test-${{ github.run_id }}' + # state-value: 'short-value' + # default-value: 'default-short' + # expiry-seconds: '120' # 2分钟 + # cache-prefix: ${{ inputs.test_prefix }} - - name: 验证短期缓存设置 - run: | - echo "🕐 短期缓存测试结果:" - echo "状态值: ${{ steps.short-expiry.outputs.state-value }}" - echo "缓存命中: ${{ steps.short-expiry.outputs.cache-hit }}" - echo "过期状态: ${{ steps.short-expiry.outputs.expired }}" - echo "缓存键: ${{ steps.short-expiry.outputs.cache-key }}" + # - name: 验证短期缓存设置 + # run: | + # echo "🕐 短期缓存测试结果:" + # echo "状态值: ${{ steps.short-expiry.outputs.state-value }}" + # echo "缓存命中: ${{ steps.short-expiry.outputs.cache-hit }}" + # echo "过期状态: ${{ steps.short-expiry.outputs.expired }}" + # echo "缓存键: ${{ steps.short-expiry.outputs.cache-key }}" - # 验证缓存键包含时间窗口（永不过期缓存键格式：Linux-test-state-short-expiry-test-1038，有过期时间格式：Linux-test-state-short-expiry-test-1038-12345） - # 检查是否有额外的时间窗口后缀（在run_id之后） - if [[ "${{ steps.short-expiry.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ 缓存键包含时间窗口标识" - else - echo "❌ 缓存键缺少时间窗口标识: ${{ steps.short-expiry.outputs.cache-key }}" - echo "期望格式: Linux-test-state-short-expiry-test-{run_id}-{time_window}" - exit 1 - fi + # # 验证缓存键包含时间窗口（永不过期缓存键格式：Linux-test-state-short-expiry-test-1038，有过期时间格式：Linux-test-state-short-expiry-test-1038-12345） + # # 检查是否有额外的时间窗口后缀（在run_id之后） + # if [[ "${{ steps.short-expiry.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ 缓存键包含时间窗口标识" + # else + # echo "❌ 缓存键缺少时间窗口标识: ${{ steps.short-expiry.outputs.cache-key }}" + # echo "期望格式: Linux-test-state-short-expiry-test-{run_id}-{time_window}" + # exit 1 + # fi - - name: 测试永不过期缓存 - id: no-expiry - uses: actions/xgj/cache-state@v1 - with: - state-key: 'no-expiry-test-${{ github.run_id }}' - state-value: 'permanent-value' - default-value: 'default-permanent' - expiry-seconds: '0' # 永不过期 - cache-prefix: ${{ inputs.test_prefix }} + # - name: 测试永不过期缓存 + # id: no-expiry + # uses: actions/xgj/cache-state@v1 + # with: + # state-key: 'no-expiry-test-${{ github.run_id }}' + # state-value: 'permanent-value' + # default-value: 'default-permanent' + # expiry-seconds: '0' # 永不过期 + # cache-prefix: ${{ inputs.test_prefix }} - - name: 验证永不过期缓存 - run: | - echo "♾️ 永不过期缓存测试结果:" - echo "状态值: ${{ steps.no-expiry.outputs.state-value }}" - echo "缓存命中: ${{ steps.no-expiry.outputs.cache-hit }}" - echo "过期状态: ${{ steps.no-expiry.outputs.expired }}" - echo "缓存键: ${{ steps.no-expiry.outputs.cache-key }}" + # - name: 验证永不过期缓存 + # run: | + # echo "♾️ 永不过期缓存测试结果:" + # echo "状态值: ${{ steps.no-expiry.outputs.state-value }}" + # echo "缓存命中: ${{ steps.no-expiry.outputs.cache-hit }}" + # echo "过期状态: ${{ steps.no-expiry.outputs.expired }}" + # echo "缓存键: ${{ steps.no-expiry.outputs.cache-key }}" - # 验证缓存键不包含时间窗口（永不过期应该只有一个数字后缀run_id，而不是两个数字后缀） - if [[ "${{ steps.no-expiry.outputs.cache-key }}" =~ -[0-9]+$ ]] && [[ ! "${{ steps.no-expiry.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ 永不过期缓存键格式正确" - else - echo "❌ 永不过期缓存键格式错误: ${{ steps.no-expiry.outputs.cache-key }}" - echo "期望格式: Linux-test-state-no-expiry-test-{run_id}（只有一个数字后缀）" - exit 1 - fi + # # 验证缓存键不包含时间窗口（永不过期应该只有一个数字后缀run_id，而不是两个数字后缀） + # if [[ "${{ steps.no-expiry.outputs.cache-key }}" =~ -[0-9]+$ ]] && [[ ! "${{ steps.no-expiry.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ 永不过期缓存键格式正确" + # else + # echo "❌ 永不过期缓存键格式错误: ${{ steps.no-expiry.outputs.cache-key }}" + # echo "期望格式: Linux-test-state-no-expiry-test-{run_id}（只有一个数字后缀）" + # exit 1 + # fi - # 验证过期状态 - if [[ "${{ steps.no-expiry.outputs.expired }}" == "false" ]]; then - echo "✅ 永不过期缓存过期状态正确" - else - echo "❌ 永不过期缓存不应显示为过期" - exit 1 - fi + # # 验证过期状态 + # if [[ "${{ steps.no-expiry.outputs.expired }}" == "false" ]]; then + # echo "✅ 永不过期缓存过期状态正确" + # else + # echo "❌ 永不过期缓存不应显示为过期" + # exit 1 + # fi - - name: 测试不同过期时间的缓存键差异 - run: | - echo "🔍 测试不同过期时间的缓存键生成..." + # - name: 测试不同过期时间的缓存键差异 + # run: | + # echo "🔍 测试不同过期时间的缓存键生成..." - # 记录当前时间窗口 - CURRENT_TIME=$(date +%s) - WINDOW_120=$((CURRENT_TIME / 120)) - WINDOW_300=$((CURRENT_TIME / 300)) + # # 记录当前时间窗口 + # CURRENT_TIME=$(date +%s) + # WINDOW_120=$((CURRENT_TIME / 120)) + # WINDOW_300=$((CURRENT_TIME / 300)) - echo "当前时间: ${CURRENT_TIME}" - echo "120秒窗口: ${WINDOW_120}" - echo "300秒窗口: ${WINDOW_300}" + # echo "当前时间: ${CURRENT_TIME}" + # echo "120秒窗口: ${WINDOW_120}" + # echo "300秒窗口: ${WINDOW_300}" - # 分析已测试的缓存键格式 - echo "" - echo "📋 已测试的缓存键格式分析:" - echo "短期缓存键: ${{ steps.short-expiry.outputs.cache-key }}" - echo "永不过期键: ${{ steps.no-expiry.outputs.cache-key }}" + # # 分析已测试的缓存键格式 + # echo "" + # echo "📋 已测试的缓存键格式分析:" + # echo "短期缓存键: ${{ steps.short-expiry.outputs.cache-key }}" + # echo "永不过期键: ${{ steps.no-expiry.outputs.cache-key }}" - # 提取缓存键的最后两个数字段 - SHORT_KEY="${{ steps.short-expiry.outputs.cache-key }}" - NO_EXPIRY_KEY="${{ steps.no-expiry.outputs.cache-key }}" + # # 提取缓存键的最后两个数字段 + # SHORT_KEY="${{ steps.short-expiry.outputs.cache-key }}" + # NO_EXPIRY_KEY="${{ steps.no-expiry.outputs.cache-key }}" - # 使用sed提取最后的数字段 - SHORT_LAST_NUM=$(echo "${SHORT_KEY}" | sed 's/.*-\([0-9]*\)$/\1/') - NO_EXPIRY_LAST_NUM=$(echo "${NO_EXPIRY_KEY}" | sed 's/.*-\([0-9]*\)$/\1/') + # # 使用sed提取最后的数字段 + # SHORT_LAST_NUM=$(echo "${SHORT_KEY}" | sed 's/.*-\([0-9]*\)$/\1/') + # NO_EXPIRY_LAST_NUM=$(echo "${NO_EXPIRY_KEY}" | sed 's/.*-\([0-9]*\)$/\1/') - echo "短期缓存最后数字: ${SHORT_LAST_NUM}" - echo "永不过期最后数字: ${NO_EXPIRY_LAST_NUM}" + # echo "短期缓存最后数字: ${SHORT_LAST_NUM}" + # echo "永不过期最后数字: ${NO_EXPIRY_LAST_NUM}" - # 如果时间窗口不同，说明过期时间影响了缓存键 - if [[ ${WINDOW_120} != ${WINDOW_300} ]]; then - echo "✅ 不同过期时间产生不同的时间窗口" - else - echo "ℹ️ 当前时间点两个时间窗口相同（正常情况）" - fi + # # 如果时间窗口不同，说明过期时间影响了缓存键 + # if [[ ${WINDOW_120} != ${WINDOW_300} ]]; then + # echo "✅ 不同过期时间产生不同的时间窗口" + # else + # echo "ℹ️ 当前时间点两个时间窗口相同（正常情况）" + # fi - - name: 测试额外的过期时间缓存键 - id: extra-expiry-test - uses: actions/xgj/cache-state@v1 - with: - state-key: 'extra-expiry-validation' - state-value: 'extra-value' - default-value: 'extra-default' - expiry-seconds: '300' - action: 'set' - cache-prefix: ${{ inputs.test_prefix }} + # - name: 测试额外的过期时间缓存键 + # id: extra-expiry-test + # uses: actions/xgj/cache-state@v1 + # with: + # state-key: 'extra-expiry-validation' + # state-value: 'extra-value' + # default-value: 'extra-default' + # expiry-seconds: '300' + # action: 'set' + # cache-prefix: ${{ inputs.test_prefix }} - - name: 验证额外过期测试的缓存键格式 - run: | - echo "🔍 验证额外过期测试缓存键:" - echo "额外过期测试键: ${{ steps.extra-expiry-test.outputs.cache-key }}" + # - name: 验证额外过期测试的缓存键格式 + # run: | + # echo "🔍 验证额外过期测试缓存键:" + # echo "额外过期测试键: ${{ steps.extra-expiry-test.outputs.cache-key }}" - # 验证这个缓存键是否有时间窗口 - if [[ "${{ steps.extra-expiry-test.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ 额外过期测试缓存键包含时间窗口" - else - echo "❌ 额外过期测试缓存键缺少时间窗口: ${{ steps.extra-expiry-test.outputs.cache-key }}" - fi + # # 验证这个缓存键是否有时间窗口 + # if [[ "${{ steps.extra-expiry-test.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ 额外过期测试缓存键包含时间窗口" + # else + # echo "❌ 额外过期测试缓存键缺少时间窗口: ${{ steps.extra-expiry-test.outputs.cache-key }}" + # fi - - name: 测试过期状态判断 - id: expiry-check - uses: actions/xgj/cache-state@v1 - with: - state-key: 'non-existent-expiry-test' - default-value: 'fallback-value' - expiry-seconds: '60' - action: 'get' - cache-prefix: ${{ inputs.test_prefix }} + # - name: 测试过期状态判断 + # id: expiry-check + # uses: actions/xgj/cache-state@v1 + # with: + # state-key: 'non-existent-expiry-test' + # default-value: 'fallback-value' + # expiry-seconds: '60' + # action: 'get' + # cache-prefix: ${{ inputs.test_prefix }} - - name: 验证过期状态判断 - run: | - echo "🔎 过期状态判断测试结果:" - echo "状态值: ${{ steps.expiry-check.outputs.state-value }}" - echo "缓存命中: ${{ steps.expiry-check.outputs.cache-hit }}" - echo "过期状态: ${{ steps.expiry-check.outputs.expired }}" - echo "使用默认值: ${{ steps.expiry-check.outputs.used-default }}" - echo "缓存键: ${{ steps.expiry-check.outputs.cache-key }}" + # - name: 验证过期状态判断 + # run: | + # echo "🔎 过期状态判断测试结果:" + # echo "状态值: ${{ steps.expiry-check.outputs.state-value }}" + # echo "缓存命中: ${{ steps.expiry-check.outputs.cache-hit }}" + # echo "过期状态: ${{ steps.expiry-check.outputs.expired }}" + # echo "使用默认值: ${{ steps.expiry-check.outputs.used-default }}" + # echo "缓存键: ${{ steps.expiry-check.outputs.cache-key }}" - # 验证缓存键包含时间窗口 - if [[ "${{ steps.expiry-check.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ 过期状态测试缓存键包含时间窗口" - else - echo "❌ 过期状态测试缓存键缺少时间窗口: ${{ steps.expiry-check.outputs.cache-key }}" - exit 1 - fi + # # 验证缓存键包含时间窗口 + # if [[ "${{ steps.expiry-check.outputs.cache-key }}" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ 过期状态测试缓存键包含时间窗口" + # else + # echo "❌ 过期状态测试缓存键缺少时间窗口: ${{ steps.expiry-check.outputs.cache-key }}" + # exit 1 + # fi - # 因为是新的状态键，应该返回默认值 - if [[ "${{ steps.expiry-check.outputs.state-value }}" == "fallback-value" ]]; then - echo "✅ 过期测试返回了正确的默认值" - else - echo "❌ 过期测试没有返回默认值，实际值: ${{ steps.expiry-check.outputs.state-value }}" - exit 1 - fi + # # 因为是新的状态键，应该返回默认值 + # if [[ "${{ steps.expiry-check.outputs.state-value }}" == "fallback-value" ]]; then + # echo "✅ 过期测试返回了正确的默认值" + # else + # echo "❌ 过期测试没有返回默认值，实际值: ${{ steps.expiry-check.outputs.state-value }}" + # exit 1 + # fi - # 检查是否正确标记为使用默认值 - if [[ "${{ steps.expiry-check.outputs.used-default }}" == "true" ]]; then - echo "✅ 正确标记使用了默认值" - else - echo "❌ 没有正确标记使用默认值: ${{ steps.expiry-check.outputs.used-default }}" - exit 1 - fi + # # 检查是否正确标记为使用默认值 + # if [[ "${{ steps.expiry-check.outputs.used-default }}" == "true" ]]; then + # echo "✅ 正确标记使用了默认值" + # else + # echo "❌ 没有正确标记使用默认值: ${{ steps.expiry-check.outputs.used-default }}" + # exit 1 + # fi - # 对于不存在的缓存且设置了过期时间，过期状态应该是false（因为缓存本身就不存在） - if [[ "${{ steps.expiry-check.outputs.cache-hit }}" == "false" && "${{ steps.expiry-check.outputs.expired }}" == "false" ]]; then - echo "✅ 正确处理不存在的缓存过期状态" - else - echo "ℹ️ 过期状态: ${{ steps.expiry-check.outputs.expired }}，缓存命中: ${{ steps.expiry-check.outputs.cache-hit }}" - echo "ℹ️ 不存在的缓存不应标记为过期，而是未命中" - fi + # # 对于不存在的缓存且设置了过期时间，过期状态应该是false（因为缓存本身就不存在） + # if [[ "${{ steps.expiry-check.outputs.cache-hit }}" == "false" && "${{ steps.expiry-check.outputs.expired }}" == "false" ]]; then + # echo "✅ 正确处理不存在的缓存过期状态" + # else + # echo "ℹ️ 过期状态: ${{ steps.expiry-check.outputs.expired }}，缓存命中: ${{ steps.expiry-check.outputs.cache-hit }}" + # echo "ℹ️ 不存在的缓存不应标记为过期，而是未命中" + # fi - - name: 测试各种过期时间值 - run: | - echo "⏱️ 过期时间功能总结..." + # - name: 测试各种过期时间值 + # run: | + # echo "⏱️ 过期时间功能总结..." - echo "" - echo "📋 已完成的过期时间测试:" - echo "✅ 短期缓存 (120秒): ${{ steps.short-expiry.outputs.cache-key }}" - echo "✅ 永不过期 (0秒): ${{ steps.no-expiry.outputs.cache-key }}" - echo "✅ 额外测试 (300秒): ${{ steps.extra-expiry-test.outputs.cache-key }}" - echo "✅ 过期状态判断 (60秒): ${{ steps.expiry-check.outputs.cache-key }}" + # echo "" + # echo "📋 已完成的过期时间测试:" + # echo "✅ 短期缓存 (120秒): ${{ steps.short-expiry.outputs.cache-key }}" + # echo "✅ 永不过期 (0秒): ${{ steps.no-expiry.outputs.cache-key }}" + # echo "✅ 额外测试 (300秒): ${{ steps.extra-expiry-test.outputs.cache-key }}" + # echo "✅ 过期状态判断 (60秒): ${{ steps.expiry-check.outputs.cache-key }}" - echo "" - echo "🔍 缓存键格式验证:" + # echo "" + # echo "🔍 缓存键格式验证:" - # 验证所有带过期时间的缓存键都有时间窗口 - KEYS_WITH_EXPIRY=( - "${{ steps.short-expiry.outputs.cache-key }}" - "${{ steps.extra-expiry-test.outputs.cache-key }}" - "${{ steps.expiry-check.outputs.cache-key }}" - ) + # # 验证所有带过期时间的缓存键都有时间窗口 + # KEYS_WITH_EXPIRY=( + # "${{ steps.short-expiry.outputs.cache-key }}" + # "${{ steps.extra-expiry-test.outputs.cache-key }}" + # "${{ steps.expiry-check.outputs.cache-key }}" + # ) - for key in "${KEYS_WITH_EXPIRY[@]}"; do - if [[ "$key" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ $key (包含时间窗口)" - else - echo "❌ $key (缺少时间窗口)" - fi - done + # for key in "${KEYS_WITH_EXPIRY[@]}"; do + # if [[ "$key" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ $key (包含时间窗口)" + # else + # echo "❌ $key (缺少时间窗口)" + # fi + # done - # 验证永不过期的缓存键 - NO_EXPIRY_KEY="${{ steps.no-expiry.outputs.cache-key }}" - if [[ "$NO_EXPIRY_KEY" =~ -[0-9]+$ ]] && [[ ! "$NO_EXPIRY_KEY" =~ -[0-9]+-[0-9]+$ ]]; then - echo "✅ $NO_EXPIRY_KEY (永不过期，只有run_id)" - else - echo "❌ $NO_EXPIRY_KEY (永不过期格式错误)" - fi + # # 验证永不过期的缓存键 + # NO_EXPIRY_KEY="${{ steps.no-expiry.outputs.cache-key }}" + # if [[ "$NO_EXPIRY_KEY" =~ -[0-9]+$ ]] && [[ ! "$NO_EXPIRY_KEY" =~ -[0-9]+-[0-9]+$ ]]; then + # echo "✅ $NO_EXPIRY_KEY (永不过期，只有run_id)" + # else + # echo "❌ $NO_EXPIRY_KEY (永不过期格式错误)" + # fi - echo "" - echo "🎯 过期时间功能测试完成！" + # echo "" + # echo "🎯 过期时间功能测试完成！" # 删除功能测试 test-delete-operations: