vendor: bump k8s dependencies to v0.29.2

Signed-off-by: CrazyMax <1951866+crazy-max@users.noreply.github.com>

vendor/github.com/mxk/go-flowrate/flowrate/flowrate.go

@@ -0,0 +1,267 @@
+//
+// Written by Maxim Khitrov (November 2012)
+//
+
+// Package flowrate provides the tools for monitoring and limiting the flow rate
+// of an arbitrary data stream.
+package flowrate
+
+import (
+	"math"
+	"sync"
+	"time"
+)
+
+// Monitor monitors and limits the transfer rate of a data stream.
+type Monitor struct {
+	mu      sync.Mutex    // Mutex guarding access to all internal fields
+	active  bool          // Flag indicating an active transfer
+	start   time.Duration // Transfer start time (clock() value)
+	bytes   int64         // Total number of bytes transferred
+	samples int64         // Total number of samples taken
+
+	rSample float64 // Most recent transfer rate sample (bytes per second)
+	rEMA    float64 // Exponential moving average of rSample
+	rPeak   float64 // Peak transfer rate (max of all rSamples)
+	rWindow float64 // rEMA window (seconds)
+
+	sBytes int64         // Number of bytes transferred since sLast
+	sLast  time.Duration // Most recent sample time (stop time when inactive)
+	sRate  time.Duration // Sampling rate
+
+	tBytes int64         // Number of bytes expected in the current transfer
+	tLast  time.Duration // Time of the most recent transfer of at least 1 byte
+}
+
+// New creates a new flow control monitor. Instantaneous transfer rate is
+// measured and updated for each sampleRate interval. windowSize determines the
+// weight of each sample in the exponential moving average (EMA) calculation.
+// The exact formulas are:
+//
+// 	sampleTime = currentTime - prevSampleTime
+// 	sampleRate = byteCount / sampleTime
+// 	weight     = 1 - exp(-sampleTime/windowSize)
+// 	newRate    = weight*sampleRate + (1-weight)*oldRate
+//
+// The default values for sampleRate and windowSize (if <= 0) are 100ms and 1s,
+// respectively.
+func New(sampleRate, windowSize time.Duration) *Monitor {
+	if sampleRate = clockRound(sampleRate); sampleRate <= 0 {
+		sampleRate = 5 * clockRate
+	}
+	if windowSize <= 0 {
+		windowSize = 1 * time.Second
+	}
+	now := clock()
+	return &Monitor{
+		active:  true,
+		start:   now,
+		rWindow: windowSize.Seconds(),
+		sLast:   now,
+		sRate:   sampleRate,
+		tLast:   now,
+	}
+}
+
+// Update records the transfer of n bytes and returns n. It should be called
+// after each Read/Write operation, even if n is 0.
+func (m *Monitor) Update(n int) int {
+	m.mu.Lock()
+	m.update(n)
+	m.mu.Unlock()
+	return n
+}
+
+// IO is a convenience method intended to wrap io.Reader and io.Writer method
+// execution. It calls m.Update(n) and then returns (n, err) unmodified.
+func (m *Monitor) IO(n int, err error) (int, error) {
+	return m.Update(n), err
+}
+
+// Done marks the transfer as finished and prevents any further updates or
+// limiting. Instantaneous and current transfer rates drop to 0. Update, IO, and
+// Limit methods become NOOPs. It returns the total number of bytes transferred.
+func (m *Monitor) Done() int64 {
+	m.mu.Lock()
+	if now := m.update(0); m.sBytes > 0 {
+		m.reset(now)
+	}
+	m.active = false
+	m.tLast = 0
+	n := m.bytes
+	m.mu.Unlock()
+	return n
+}
+
+// timeRemLimit is the maximum Status.TimeRem value.
+const timeRemLimit = 999*time.Hour + 59*time.Minute + 59*time.Second
+
+// Status represents the current Monitor status. All transfer rates are in bytes
+// per second rounded to the nearest byte.
+type Status struct {
+	Active   bool          // Flag indicating an active transfer
+	Start    time.Time     // Transfer start time
+	Duration time.Duration // Time period covered by the statistics
+	Idle     time.Duration // Time since the last transfer of at least 1 byte
+	Bytes    int64         // Total number of bytes transferred
+	Samples  int64         // Total number of samples taken
+	InstRate int64         // Instantaneous transfer rate
+	CurRate  int64         // Current transfer rate (EMA of InstRate)
+	AvgRate  int64         // Average transfer rate (Bytes / Duration)
+	PeakRate int64         // Maximum instantaneous transfer rate
+	BytesRem int64         // Number of bytes remaining in the transfer
+	TimeRem  time.Duration // Estimated time to completion
+	Progress Percent       // Overall transfer progress
+}
+
+// Status returns current transfer status information. The returned value
+// becomes static after a call to Done.
+func (m *Monitor) Status() Status {
+	m.mu.Lock()
+	now := m.update(0)
+	s := Status{
+		Active:   m.active,
+		Start:    clockToTime(m.start),
+		Duration: m.sLast - m.start,
+		Idle:     now - m.tLast,
+		Bytes:    m.bytes,
+		Samples:  m.samples,
+		PeakRate: round(m.rPeak),
+		BytesRem: m.tBytes - m.bytes,
+		Progress: percentOf(float64(m.bytes), float64(m.tBytes)),
+	}
+	if s.BytesRem < 0 {
+		s.BytesRem = 0
+	}
+	if s.Duration > 0 {
+		rAvg := float64(s.Bytes) / s.Duration.Seconds()
+		s.AvgRate = round(rAvg)
+		if s.Active {
+			s.InstRate = round(m.rSample)
+			s.CurRate = round(m.rEMA)
+			if s.BytesRem > 0 {
+				if tRate := 0.8*m.rEMA + 0.2*rAvg; tRate > 0 {
+					ns := float64(s.BytesRem) / tRate * 1e9
+					if ns > float64(timeRemLimit) {
+						ns = float64(timeRemLimit)
+					}
+					s.TimeRem = clockRound(time.Duration(ns))
+				}
+			}
+		}
+	}
+	m.mu.Unlock()
+	return s
+}
+
+// Limit restricts the instantaneous (per-sample) data flow to rate bytes per
+// second. It returns the maximum number of bytes (0 <= n <= want) that may be
+// transferred immediately without exceeding the limit. If block == true, the
+// call blocks until n > 0. want is returned unmodified if want < 1, rate < 1,
+// or the transfer is inactive (after a call to Done).
+//
+// At least one byte is always allowed to be transferred in any given sampling
+// period. Thus, if the sampling rate is 100ms, the lowest achievable flow rate
+// is 10 bytes per second.
+//
+// For usage examples, see the implementation of Reader and Writer in io.go.
+func (m *Monitor) Limit(want int, rate int64, block bool) (n int) {
+	if want < 1 || rate < 1 {
+		return want
+	}
+	m.mu.Lock()
+
+	// Determine the maximum number of bytes that can be sent in one sample
+	limit := round(float64(rate) * m.sRate.Seconds())
+	if limit <= 0 {
+		limit = 1
+	}
+
+	// If block == true, wait until m.sBytes < limit
+	if now := m.update(0); block {
+		for m.sBytes >= limit && m.active {
+			now = m.waitNextSample(now)
+		}
+	}
+
+	// Make limit <= want (unlimited if the transfer is no longer active)
+	if limit -= m.sBytes; limit > int64(want) || !m.active {
+		limit = int64(want)
+	}
+	m.mu.Unlock()
+
+	if limit < 0 {
+		limit = 0
+	}
+	return int(limit)
+}
+
+// SetTransferSize specifies the total size of the data transfer, which allows
+// the Monitor to calculate the overall progress and time to completion.
+func (m *Monitor) SetTransferSize(bytes int64) {
+	if bytes < 0 {
+		bytes = 0
+	}
+	m.mu.Lock()
+	m.tBytes = bytes
+	m.mu.Unlock()
+}
+
+// update accumulates the transferred byte count for the current sample until
+// clock() - m.sLast >= m.sRate. The monitor status is updated once the current
+// sample is done.
+func (m *Monitor) update(n int) (now time.Duration) {
+	if !m.active {
+		return
+	}
+	if now = clock(); n > 0 {
+		m.tLast = now
+	}
+	m.sBytes += int64(n)
+	if sTime := now - m.sLast; sTime >= m.sRate {
+		t := sTime.Seconds()
+		if m.rSample = float64(m.sBytes) / t; m.rSample > m.rPeak {
+			m.rPeak = m.rSample
+		}
+
+		// Exponential moving average using a method similar to *nix load
+		// average calculation. Longer sampling periods carry greater weight.
+		if m.samples > 0 {
+			w := math.Exp(-t / m.rWindow)
+			m.rEMA = m.rSample + w*(m.rEMA-m.rSample)
+		} else {
+			m.rEMA = m.rSample
+		}
+		m.reset(now)
+	}
+	return
+}
+
+// reset clears the current sample state in preparation for the next sample.
+func (m *Monitor) reset(sampleTime time.Duration) {
+	m.bytes += m.sBytes
+	m.samples++
+	m.sBytes = 0
+	m.sLast = sampleTime
+}
+
+// waitNextSample sleeps for the remainder of the current sample. The lock is
+// released and reacquired during the actual sleep period, so it's possible for
+// the transfer to be inactive when this method returns.
+func (m *Monitor) waitNextSample(now time.Duration) time.Duration {
+	const minWait = 5 * time.Millisecond
+	current := m.sLast
+
+	// sleep until the last sample time changes (ideally, just one iteration)
+	for m.sLast == current && m.active {
+		d := current + m.sRate - now
+		m.mu.Unlock()
+		if d < minWait {
+			d = minWait
+		}
+		time.Sleep(d)
+		m.mu.Lock()
+		now = m.update(0)
+	}
+	return now
+}

vendor/github.com/mxk/go-flowrate/flowrate/io.go

@@ -0,0 +1,133 @@
+//
+// Written by Maxim Khitrov (November 2012)
+//
+
+package flowrate
+
+import (
+	"errors"
+	"io"
+)
+
+// ErrLimit is returned by the Writer when a non-blocking write is short due to
+// the transfer rate limit.
+var ErrLimit = errors.New("flowrate: flow rate limit exceeded")
+
+// Limiter is implemented by the Reader and Writer to provide a consistent
+// interface for monitoring and controlling data transfer.
+type Limiter interface {
+	Done() int64
+	Status() Status
+	SetTransferSize(bytes int64)
+	SetLimit(new int64) (old int64)
+	SetBlocking(new bool) (old bool)
+}
+
+// Reader implements io.ReadCloser with a restriction on the rate of data
+// transfer.
+type Reader struct {
+	io.Reader // Data source
+	*Monitor  // Flow control monitor
+
+	limit int64 // Rate limit in bytes per second (unlimited when <= 0)
+	block bool  // What to do when no new bytes can be read due to the limit
+}
+
+// NewReader restricts all Read operations on r to limit bytes per second.
+func NewReader(r io.Reader, limit int64) *Reader {
+	return &Reader{r, New(0, 0), limit, true}
+}
+
+// Read reads up to len(p) bytes into p without exceeding the current transfer
+// rate limit. It returns (0, nil) immediately if r is non-blocking and no new
+// bytes can be read at this time.
+func (r *Reader) Read(p []byte) (n int, err error) {
+	p = p[:r.Limit(len(p), r.limit, r.block)]
+	if len(p) > 0 {
+		n, err = r.IO(r.Reader.Read(p))
+	}
+	return
+}
+
+// SetLimit changes the transfer rate limit to new bytes per second and returns
+// the previous setting.
+func (r *Reader) SetLimit(new int64) (old int64) {
+	old, r.limit = r.limit, new
+	return
+}
+
+// SetBlocking changes the blocking behavior and returns the previous setting. A
+// Read call on a non-blocking reader returns immediately if no additional bytes
+// may be read at this time due to the rate limit.
+func (r *Reader) SetBlocking(new bool) (old bool) {
+	old, r.block = r.block, new
+	return
+}
+
+// Close closes the underlying reader if it implements the io.Closer interface.
+func (r *Reader) Close() error {
+	defer r.Done()
+	if c, ok := r.Reader.(io.Closer); ok {
+		return c.Close()
+	}
+	return nil
+}
+
+// Writer implements io.WriteCloser with a restriction on the rate of data
+// transfer.
+type Writer struct {
+	io.Writer // Data destination
+	*Monitor  // Flow control monitor
+
+	limit int64 // Rate limit in bytes per second (unlimited when <= 0)
+	block bool  // What to do when no new bytes can be written due to the limit
+}
+
+// NewWriter restricts all Write operations on w to limit bytes per second. The
+// transfer rate and the default blocking behavior (true) can be changed
+// directly on the returned *Writer.
+func NewWriter(w io.Writer, limit int64) *Writer {
+	return &Writer{w, New(0, 0), limit, true}
+}
+
+// Write writes len(p) bytes from p to the underlying data stream without
+// exceeding the current transfer rate limit. It returns (n, ErrLimit) if w is
+// non-blocking and no additional bytes can be written at this time.
+func (w *Writer) Write(p []byte) (n int, err error) {
+	var c int
+	for len(p) > 0 && err == nil {
+		s := p[:w.Limit(len(p), w.limit, w.block)]
+		if len(s) > 0 {
+			c, err = w.IO(w.Writer.Write(s))
+		} else {
+			return n, ErrLimit
+		}
+		p = p[c:]
+		n += c
+	}
+	return
+}
+
+// SetLimit changes the transfer rate limit to new bytes per second and returns
+// the previous setting.
+func (w *Writer) SetLimit(new int64) (old int64) {
+	old, w.limit = w.limit, new
+	return
+}
+
+// SetBlocking changes the blocking behavior and returns the previous setting. A
+// Write call on a non-blocking writer returns as soon as no additional bytes
+// may be written at this time due to the rate limit.
+func (w *Writer) SetBlocking(new bool) (old bool) {
+	old, w.block = w.block, new
+	return
+}
+
+// Close closes the underlying writer if it implements the io.Closer interface.
+func (w *Writer) Close() error {
+	defer w.Done()
+	if c, ok := w.Writer.(io.Closer); ok {
+		return c.Close()
+	}
+	return nil
+}

vendor/github.com/mxk/go-flowrate/flowrate/util.go

@@ -0,0 +1,67 @@
+//
+// Written by Maxim Khitrov (November 2012)
+//
+
+package flowrate
+
+import (
+	"math"
+	"strconv"
+	"time"
+)
+
+// clockRate is the resolution and precision of clock().
+const clockRate = 20 * time.Millisecond
+
+// czero is the process start time rounded down to the nearest clockRate
+// increment.
+var czero = time.Duration(time.Now().UnixNano()) / clockRate * clockRate
+
+// clock returns a low resolution timestamp relative to the process start time.
+func clock() time.Duration {
+	return time.Duration(time.Now().UnixNano())/clockRate*clockRate - czero
+}
+
+// clockToTime converts a clock() timestamp to an absolute time.Time value.
+func clockToTime(c time.Duration) time.Time {
+	return time.Unix(0, int64(czero+c))
+}
+
+// clockRound returns d rounded to the nearest clockRate increment.
+func clockRound(d time.Duration) time.Duration {
+	return (d + clockRate>>1) / clockRate * clockRate
+}
+
+// round returns x rounded to the nearest int64 (non-negative values only).
+func round(x float64) int64 {
+	if _, frac := math.Modf(x); frac >= 0.5 {
+		return int64(math.Ceil(x))
+	}
+	return int64(math.Floor(x))
+}
+
+// Percent represents a percentage in increments of 1/1000th of a percent.
+type Percent uint32
+
+// percentOf calculates what percent of the total is x.
+func percentOf(x, total float64) Percent {
+	if x < 0 || total <= 0 {
+		return 0
+	} else if p := round(x / total * 1e5); p <= math.MaxUint32 {
+		return Percent(p)
+	}
+	return Percent(math.MaxUint32)
+}
+
+func (p Percent) Float() float64 {
+	return float64(p) * 1e-3
+}
+
+func (p Percent) String() string {
+	var buf [12]byte
+	b := strconv.AppendUint(buf[:0], uint64(p)/1000, 10)
+	n := len(b)
+	b = strconv.AppendUint(b, 1000+uint64(p)%1000, 10)
+	b[n] = '.'
+	return string(append(b, '%'))
+}