migrate to use github.com/moby/sys/atomicwriter

The github.com/docker/docker/pkg/atomicwriter package was moved
to a separate module.

Signed-off-by: Sebastiaan van Stijn <github@gone.nl>

vendor/github.com/moby/sys/atomicwriter/atomicwriter.go

@@ -0,0 +1,245 @@
+// Package atomicwriter provides utilities to perform atomic writes to a
+// file or set of files.
+package atomicwriter
+
+import (
+	"errors"
+	"fmt"
+	"io"
+	"os"
+	"path/filepath"
+	"syscall"
+
+	"github.com/moby/sys/sequential"
+)
+
+func validateDestination(fileName string) error {
+	if fileName == "" {
+		return errors.New("file name is empty")
+	}
+	if dir := filepath.Dir(fileName); dir != "" && dir != "." && dir != ".." {
+		di, err := os.Stat(dir)
+		if err != nil {
+			return fmt.Errorf("invalid output path: %w", err)
+		}
+		if !di.IsDir() {
+			return fmt.Errorf("invalid output path: %w", &os.PathError{Op: "stat", Path: dir, Err: syscall.ENOTDIR})
+		}
+	}
+
+	// Deliberately using Lstat here to match the behavior of [os.Rename],
+	// which is used when completing the write and does not resolve symlinks.
+	fi, err := os.Lstat(fileName)
+	if err != nil {
+		if os.IsNotExist(err) {
+			return nil
+		}
+		return fmt.Errorf("failed to stat output path: %w", err)
+	}
+
+	switch mode := fi.Mode(); {
+	case mode.IsRegular():
+		return nil // Regular file
+	case mode&os.ModeDir != 0:
+		return errors.New("cannot write to a directory")
+	case mode&os.ModeSymlink != 0:
+		return errors.New("cannot write to a symbolic link directly")
+	case mode&os.ModeNamedPipe != 0:
+		return errors.New("cannot write to a named pipe (FIFO)")
+	case mode&os.ModeSocket != 0:
+		return errors.New("cannot write to a socket")
+	case mode&os.ModeDevice != 0:
+		if mode&os.ModeCharDevice != 0 {
+			return errors.New("cannot write to a character device file")
+		}
+		return errors.New("cannot write to a block device file")
+	case mode&os.ModeSetuid != 0:
+		return errors.New("cannot write to a setuid file")
+	case mode&os.ModeSetgid != 0:
+		return errors.New("cannot write to a setgid file")
+	case mode&os.ModeSticky != 0:
+		return errors.New("cannot write to a sticky bit file")
+	default:
+		return fmt.Errorf("unknown file mode: %[1]s (%#[1]o)", mode)
+	}
+}
+
+// New returns a WriteCloser so that writing to it writes to a
+// temporary file and closing it atomically changes the temporary file to
+// destination path. Writing and closing concurrently is not allowed.
+// NOTE: umask is not considered for the file's permissions.
+//
+// New uses [sequential.CreateTemp] to use sequential file access on Windows,
+// avoiding depleting the standby list un-necessarily. On Linux, this equates to
+// a regular [os.CreateTemp]. Refer to the [Win32 API documentation] for details
+// on sequential file access.
+//
+// [Win32 API documentation]: https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-createfilea#FILE_FLAG_SEQUENTIAL_SCAN
+func New(filename string, perm os.FileMode) (io.WriteCloser, error) {
+	if err := validateDestination(filename); err != nil {
+		return nil, err
+	}
+	abspath, err := filepath.Abs(filename)
+	if err != nil {
+		return nil, err
+	}
+
+	f, err := sequential.CreateTemp(filepath.Dir(abspath), ".tmp-"+filepath.Base(filename))
+	if err != nil {
+		return nil, err
+	}
+	return &atomicFileWriter{
+		f:    f,
+		fn:   abspath,
+		perm: perm,
+	}, nil
+}
+
+// WriteFile atomically writes data to a file named by filename and with the
+// specified permission bits. The given filename is created if it does not exist,
+// but the destination directory must exist. It can be used as a drop-in replacement
+// for [os.WriteFile], but currently does not allow the destination path to be
+// a symlink. WriteFile is implemented using [New] for its implementation.
+//
+// NOTE: umask is not considered for the file's permissions.
+func WriteFile(filename string, data []byte, perm os.FileMode) error {
+	f, err := New(filename, perm)
+	if err != nil {
+		return err
+	}
+	n, err := f.Write(data)
+	if err == nil && n < len(data) {
+		err = io.ErrShortWrite
+		f.(*atomicFileWriter).writeErr = err
+	}
+	if err1 := f.Close(); err == nil {
+		err = err1
+	}
+	return err
+}
+
+type atomicFileWriter struct {
+	f        *os.File
+	fn       string
+	writeErr error
+	written  bool
+	perm     os.FileMode
+}
+
+func (w *atomicFileWriter) Write(dt []byte) (int, error) {
+	w.written = true
+	n, err := w.f.Write(dt)
+	if err != nil {
+		w.writeErr = err
+	}
+	return n, err
+}
+
+func (w *atomicFileWriter) Close() (retErr error) {
+	defer func() {
+		if err := os.Remove(w.f.Name()); !errors.Is(err, os.ErrNotExist) && retErr == nil {
+			retErr = err
+		}
+	}()
+	if err := w.f.Sync(); err != nil {
+		_ = w.f.Close()
+		return err
+	}
+	if err := w.f.Close(); err != nil {
+		return err
+	}
+	if err := os.Chmod(w.f.Name(), w.perm); err != nil {
+		return err
+	}
+	if w.writeErr == nil && w.written {
+		return os.Rename(w.f.Name(), w.fn)
+	}
+	return nil
+}
+
+// WriteSet is used to atomically write a set
+// of files and ensure they are visible at the same time.
+// Must be committed to a new directory.
+type WriteSet struct {
+	root string
+}
+
+// NewWriteSet creates a new atomic write set to
+// atomically create a set of files. The given directory
+// is used as the base directory for storing files before
+// commit. If no temporary directory is given the system
+// default is used.
+func NewWriteSet(tmpDir string) (*WriteSet, error) {
+	td, err := os.MkdirTemp(tmpDir, "write-set-")
+	if err != nil {
+		return nil, err
+	}
+
+	return &WriteSet{
+		root: td,
+	}, nil
+}
+
+// WriteFile writes a file to the set, guaranteeing the file
+// has been synced.
+func (ws *WriteSet) WriteFile(filename string, data []byte, perm os.FileMode) error {
+	f, err := ws.FileWriter(filename, os.O_WRONLY|os.O_CREATE|os.O_TRUNC, perm)
+	if err != nil {
+		return err
+	}
+	n, err := f.Write(data)
+	if err == nil && n < len(data) {
+		err = io.ErrShortWrite
+	}
+	if err1 := f.Close(); err == nil {
+		err = err1
+	}
+	return err
+}
+
+type syncFileCloser struct {
+	*os.File
+}
+
+func (w syncFileCloser) Close() error {
+	err := w.File.Sync()
+	if err1 := w.File.Close(); err == nil {
+		err = err1
+	}
+	return err
+}
+
+// FileWriter opens a file writer inside the set. The file
+// should be synced and closed before calling commit.
+//
+// FileWriter uses [sequential.OpenFile] to use sequential file access on Windows,
+// avoiding depleting the standby list un-necessarily. On Linux, this equates to
+// a regular [os.OpenFile]. Refer to the [Win32 API documentation] for details
+// on sequential file access.
+//
+// [Win32 API documentation]: https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-createfilea#FILE_FLAG_SEQUENTIAL_SCAN
+func (ws *WriteSet) FileWriter(name string, flag int, perm os.FileMode) (io.WriteCloser, error) {
+	f, err := sequential.OpenFile(filepath.Join(ws.root, name), flag, perm)
+	if err != nil {
+		return nil, err
+	}
+	return syncFileCloser{f}, nil
+}
+
+// Cancel cancels the set and removes all temporary data
+// created in the set.
+func (ws *WriteSet) Cancel() error {
+	return os.RemoveAll(ws.root)
+}
+
+// Commit moves all created files to the target directory. The
+// target directory must not exist and the parent of the target
+// directory must exist.
+func (ws *WriteSet) Commit(target string) error {
+	return os.Rename(ws.root, target)
+}
+
+// String returns the location the set is writing to.
+func (ws *WriteSet) String() string {
+	return ws.root
+}