vendor: initial vendor

Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>

vendor/google.golang.org/grpc/internal/backoff/backoff.go

@@ -0,0 +1,78 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package backoff implement the backoff strategy for gRPC.
+//
+// This is kept in internal until the gRPC project decides whether or not to
+// allow alternative backoff strategies.
+package backoff
+
+import (
+	"time"
+
+	"google.golang.org/grpc/internal/grpcrand"
+)
+
+// Strategy defines the methodology for backing off after a grpc connection
+// failure.
+//
+type Strategy interface {
+	// Backoff returns the amount of time to wait before the next retry given
+	// the number of consecutive failures.
+	Backoff(retries int) time.Duration
+}
+
+const (
+	// baseDelay is the amount of time to wait before retrying after the first
+	// failure.
+	baseDelay = 1.0 * time.Second
+	// factor is applied to the backoff after each retry.
+	factor = 1.6
+	// jitter provides a range to randomize backoff delays.
+	jitter = 0.2
+)
+
+// Exponential implements exponential backoff algorithm as defined in
+// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md.
+type Exponential struct {
+	// MaxDelay is the upper bound of backoff delay.
+	MaxDelay time.Duration
+}
+
+// Backoff returns the amount of time to wait before the next retry given the
+// number of retries.
+func (bc Exponential) Backoff(retries int) time.Duration {
+	if retries == 0 {
+		return baseDelay
+	}
+	backoff, max := float64(baseDelay), float64(bc.MaxDelay)
+	for backoff < max && retries > 0 {
+		backoff *= factor
+		retries--
+	}
+	if backoff > max {
+		backoff = max
+	}
+	// Randomize backoff delays so that if a cluster of requests start at
+	// the same time, they won't operate in lockstep.
+	backoff *= 1 + jitter*(grpcrand.Float64()*2-1)
+	if backoff < 0 {
+		return 0
+	}
+	return time.Duration(backoff)
+}

vendor/google.golang.org/grpc/internal/binarylog/binarylog.go

@@ -0,0 +1,167 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package binarylog implementation binary logging as defined in
+// https://github.com/grpc/proposal/blob/master/A16-binary-logging.md.
+package binarylog
+
+import (
+	"fmt"
+	"os"
+
+	"google.golang.org/grpc/grpclog"
+)
+
+// Logger is the global binary logger. It can be used to get binary logger for
+// each method.
+type Logger interface {
+	getMethodLogger(methodName string) *MethodLogger
+}
+
+// binLogger is the global binary logger for the binary. One of this should be
+// built at init time from the configuration (environment varialbe or flags).
+//
+// It is used to get a methodLogger for each individual method.
+var binLogger Logger
+
+// SetLogger sets the binarg logger.
+//
+// Only call this at init time.
+func SetLogger(l Logger) {
+	binLogger = l
+}
+
+// GetMethodLogger returns the methodLogger for the given methodName.
+//
+// methodName should be in the format of "/service/method".
+//
+// Each methodLogger returned by this method is a new instance. This is to
+// generate sequence id within the call.
+func GetMethodLogger(methodName string) *MethodLogger {
+	if binLogger == nil {
+		return nil
+	}
+	return binLogger.getMethodLogger(methodName)
+}
+
+func init() {
+	const envStr = "GRPC_BINARY_LOG_FILTER"
+	configStr := os.Getenv(envStr)
+	binLogger = NewLoggerFromConfigString(configStr)
+}
+
+type methodLoggerConfig struct {
+	// Max length of header and message.
+	hdr, msg uint64
+}
+
+type logger struct {
+	all      *methodLoggerConfig
+	services map[string]*methodLoggerConfig
+	methods  map[string]*methodLoggerConfig
+
+	blacklist map[string]struct{}
+}
+
+// newEmptyLogger creates an empty logger. The map fields need to be filled in
+// using the set* functions.
+func newEmptyLogger() *logger {
+	return &logger{}
+}
+
+// Set method logger for "*".
+func (l *logger) setDefaultMethodLogger(ml *methodLoggerConfig) error {
+	if l.all != nil {
+		return fmt.Errorf("conflicting global rules found")
+	}
+	l.all = ml
+	return nil
+}
+
+// Set method logger for "service/*".
+//
+// New methodLogger with same service overrides the old one.
+func (l *logger) setServiceMethodLogger(service string, ml *methodLoggerConfig) error {
+	if _, ok := l.services[service]; ok {
+		return fmt.Errorf("conflicting rules for service %v found", service)
+	}
+	if l.services == nil {
+		l.services = make(map[string]*methodLoggerConfig)
+	}
+	l.services[service] = ml
+	return nil
+}
+
+// Set method logger for "service/method".
+//
+// New methodLogger with same method overrides the old one.
+func (l *logger) setMethodMethodLogger(method string, ml *methodLoggerConfig) error {
+	if _, ok := l.blacklist[method]; ok {
+		return fmt.Errorf("conflicting rules for method %v found", method)
+	}
+	if _, ok := l.methods[method]; ok {
+		return fmt.Errorf("conflicting rules for method %v found", method)
+	}
+	if l.methods == nil {
+		l.methods = make(map[string]*methodLoggerConfig)
+	}
+	l.methods[method] = ml
+	return nil
+}
+
+// Set blacklist method for "-service/method".
+func (l *logger) setBlacklist(method string) error {
+	if _, ok := l.blacklist[method]; ok {
+		return fmt.Errorf("conflicting rules for method %v found", method)
+	}
+	if _, ok := l.methods[method]; ok {
+		return fmt.Errorf("conflicting rules for method %v found", method)
+	}
+	if l.blacklist == nil {
+		l.blacklist = make(map[string]struct{})
+	}
+	l.blacklist[method] = struct{}{}
+	return nil
+}
+
+// getMethodLogger returns the methodLogger for the given methodName.
+//
+// methodName should be in the format of "/service/method".
+//
+// Each methodLogger returned by this method is a new instance. This is to
+// generate sequence id within the call.
+func (l *logger) getMethodLogger(methodName string) *MethodLogger {
+	s, m, err := parseMethodName(methodName)
+	if err != nil {
+		grpclog.Infof("binarylogging: failed to parse %q: %v", methodName, err)
+		return nil
+	}
+	if ml, ok := l.methods[s+"/"+m]; ok {
+		return newMethodLogger(ml.hdr, ml.msg)
+	}
+	if _, ok := l.blacklist[s+"/"+m]; ok {
+		return nil
+	}
+	if ml, ok := l.services[s]; ok {
+		return newMethodLogger(ml.hdr, ml.msg)
+	}
+	if l.all == nil {
+		return nil
+	}
+	return newMethodLogger(l.all.hdr, l.all.msg)
+}

vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go

@@ -0,0 +1,42 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file contains exported variables/functions that are exported for testing
+// only.
+//
+// An ideal way for this would be to put those in a *_test.go but in binarylog
+// package. But this doesn't work with staticcheck with go module. Error was:
+// "MdToMetadataProto not declared by package binarylog". This could be caused
+// by the way staticcheck looks for files for a certain package, which doesn't
+// support *_test.go files.
+//
+// Move those to binary_test.go when staticcheck is fixed.
+
+package binarylog
+
+var (
+	// AllLogger is a logger that logs all headers/messages for all RPCs. It's
+	// for testing only.
+	AllLogger = NewLoggerFromConfigString("*")
+	// MdToMetadataProto converts metadata to a binary logging proto message.
+	// It's for testing only.
+	MdToMetadataProto = mdToMetadataProto
+	// AddrToProto converts an address to a binary logging proto message. It's
+	// for testing only.
+	AddrToProto = addrToProto
+)

vendor/google.golang.org/grpc/internal/binarylog/env_config.go

@@ -0,0 +1,210 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+	"errors"
+	"fmt"
+	"regexp"
+	"strconv"
+	"strings"
+
+	"google.golang.org/grpc/grpclog"
+)
+
+// NewLoggerFromConfigString reads the string and build a logger. It can be used
+// to build a new logger and assign it to binarylog.Logger.
+//
+// Example filter config strings:
+//  - "" Nothing will be logged
+//  - "*" All headers and messages will be fully logged.
+//  - "*{h}" Only headers will be logged.
+//  - "*{m:256}" Only the first 256 bytes of each message will be logged.
+//  - "Foo/*" Logs every method in service Foo
+//  - "Foo/*,-Foo/Bar" Logs every method in service Foo except method /Foo/Bar
+//  - "Foo/*,Foo/Bar{m:256}" Logs the first 256 bytes of each message in method
+//    /Foo/Bar, logs all headers and messages in every other method in service
+//    Foo.
+//
+// If two configs exist for one certain method or service, the one specified
+// later overrides the privous config.
+func NewLoggerFromConfigString(s string) Logger {
+	if s == "" {
+		return nil
+	}
+	l := newEmptyLogger()
+	methods := strings.Split(s, ",")
+	for _, method := range methods {
+		if err := l.fillMethodLoggerWithConfigString(method); err != nil {
+			grpclog.Warningf("failed to parse binary log config: %v", err)
+			return nil
+		}
+	}
+	return l
+}
+
+// fillMethodLoggerWithConfigString parses config, creates methodLogger and adds
+// it to the right map in the logger.
+func (l *logger) fillMethodLoggerWithConfigString(config string) error {
+	// "" is invalid.
+	if config == "" {
+		return errors.New("empty string is not a valid method binary logging config")
+	}
+
+	// "-service/method", blacklist, no * or {} allowed.
+	if config[0] == '-' {
+		s, m, suffix, err := parseMethodConfigAndSuffix(config[1:])
+		if err != nil {
+			return fmt.Errorf("invalid config: %q, %v", config, err)
+		}
+		if m == "*" {
+			return fmt.Errorf("invalid config: %q, %v", config, "* not allowd in blacklist config")
+		}
+		if suffix != "" {
+			return fmt.Errorf("invalid config: %q, %v", config, "header/message limit not allowed in blacklist config")
+		}
+		if err := l.setBlacklist(s + "/" + m); err != nil {
+			return fmt.Errorf("invalid config: %v", err)
+		}
+		return nil
+	}
+
+	// "*{h:256;m:256}"
+	if config[0] == '*' {
+		hdr, msg, err := parseHeaderMessageLengthConfig(config[1:])
+		if err != nil {
+			return fmt.Errorf("invalid config: %q, %v", config, err)
+		}
+		if err := l.setDefaultMethodLogger(&methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+			return fmt.Errorf("invalid config: %v", err)
+		}
+		return nil
+	}
+
+	s, m, suffix, err := parseMethodConfigAndSuffix(config)
+	if err != nil {
+		return fmt.Errorf("invalid config: %q, %v", config, err)
+	}
+	hdr, msg, err := parseHeaderMessageLengthConfig(suffix)
+	if err != nil {
+		return fmt.Errorf("invalid header/message length config: %q, %v", suffix, err)
+	}
+	if m == "*" {
+		if err := l.setServiceMethodLogger(s, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+			return fmt.Errorf("invalid config: %v", err)
+		}
+	} else {
+		if err := l.setMethodMethodLogger(s+"/"+m, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil {
+			return fmt.Errorf("invalid config: %v", err)
+		}
+	}
+	return nil
+}
+
+const (
+	// TODO: this const is only used by env_config now. But could be useful for
+	// other config. Move to binarylog.go if necessary.
+	maxUInt = ^uint64(0)
+
+	// For "p.s/m" plus any suffix. Suffix will be parsed again. See test for
+	// expected output.
+	longMethodConfigRegexpStr = `^([\w./]+)/((?:\w+)|[*])(.+)?$`
+
+	// For suffix from above, "{h:123,m:123}". See test for expected output.
+	optionalLengthRegexpStr      = `(?::(\d+))?` // Optional ":123".
+	headerConfigRegexpStr        = `^{h` + optionalLengthRegexpStr + `}$`
+	messageConfigRegexpStr       = `^{m` + optionalLengthRegexpStr + `}$`
+	headerMessageConfigRegexpStr = `^{h` + optionalLengthRegexpStr + `;m` + optionalLengthRegexpStr + `}$`
+)
+
+var (
+	longMethodConfigRegexp    = regexp.MustCompile(longMethodConfigRegexpStr)
+	headerConfigRegexp        = regexp.MustCompile(headerConfigRegexpStr)
+	messageConfigRegexp       = regexp.MustCompile(messageConfigRegexpStr)
+	headerMessageConfigRegexp = regexp.MustCompile(headerMessageConfigRegexpStr)
+)
+
+// Turn "service/method{h;m}" into "service", "method", "{h;m}".
+func parseMethodConfigAndSuffix(c string) (service, method, suffix string, _ error) {
+	// Regexp result:
+	//
+	// in:  "p.s/m{h:123,m:123}",
+	// out: []string{"p.s/m{h:123,m:123}", "p.s", "m", "{h:123,m:123}"},
+	match := longMethodConfigRegexp.FindStringSubmatch(c)
+	if match == nil {
+		return "", "", "", fmt.Errorf("%q contains invalid substring", c)
+	}
+	service = match[1]
+	method = match[2]
+	suffix = match[3]
+	return
+}
+
+// Turn "{h:123;m:345}" into 123, 345.
+//
+// Return maxUInt if length is unspecified.
+func parseHeaderMessageLengthConfig(c string) (hdrLenStr, msgLenStr uint64, err error) {
+	if c == "" {
+		return maxUInt, maxUInt, nil
+	}
+	// Header config only.
+	if match := headerConfigRegexp.FindStringSubmatch(c); match != nil {
+		if s := match[1]; s != "" {
+			hdrLenStr, err = strconv.ParseUint(s, 10, 64)
+			if err != nil {
+				return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+			}
+			return hdrLenStr, 0, nil
+		}
+		return maxUInt, 0, nil
+	}
+
+	// Message config only.
+	if match := messageConfigRegexp.FindStringSubmatch(c); match != nil {
+		if s := match[1]; s != "" {
+			msgLenStr, err = strconv.ParseUint(s, 10, 64)
+			if err != nil {
+				return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+			}
+			return 0, msgLenStr, nil
+		}
+		return 0, maxUInt, nil
+	}
+
+	// Header and message config both.
+	if match := headerMessageConfigRegexp.FindStringSubmatch(c); match != nil {
+		// Both hdr and msg are specified, but one or two of them might be empty.
+		hdrLenStr = maxUInt
+		msgLenStr = maxUInt
+		if s := match[1]; s != "" {
+			hdrLenStr, err = strconv.ParseUint(s, 10, 64)
+			if err != nil {
+				return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+			}
+		}
+		if s := match[2]; s != "" {
+			msgLenStr, err = strconv.ParseUint(s, 10, 64)
+			if err != nil {
+				return 0, 0, fmt.Errorf("failed to convert %q to uint", s)
+			}
+		}
+		return hdrLenStr, msgLenStr, nil
+	}
+	return 0, 0, fmt.Errorf("%q contains invalid substring", c)
+}

vendor/google.golang.org/grpc/internal/binarylog/method_logger.go

@@ -0,0 +1,423 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+	"net"
+	"strings"
+	"sync/atomic"
+	"time"
+
+	"github.com/golang/protobuf/proto"
+	"github.com/golang/protobuf/ptypes"
+	pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1"
+	"google.golang.org/grpc/grpclog"
+	"google.golang.org/grpc/metadata"
+	"google.golang.org/grpc/status"
+)
+
+type callIDGenerator struct {
+	id uint64
+}
+
+func (g *callIDGenerator) next() uint64 {
+	id := atomic.AddUint64(&g.id, 1)
+	return id
+}
+
+// reset is for testing only, and doesn't need to be thread safe.
+func (g *callIDGenerator) reset() {
+	g.id = 0
+}
+
+var idGen callIDGenerator
+
+// MethodLogger is the sub-logger for each method.
+type MethodLogger struct {
+	headerMaxLen, messageMaxLen uint64
+
+	callID          uint64
+	idWithinCallGen *callIDGenerator
+
+	sink Sink // TODO(blog): make this plugable.
+}
+
+func newMethodLogger(h, m uint64) *MethodLogger {
+	return &MethodLogger{
+		headerMaxLen:  h,
+		messageMaxLen: m,
+
+		callID:          idGen.next(),
+		idWithinCallGen: &callIDGenerator{},
+
+		sink: defaultSink, // TODO(blog): make it plugable.
+	}
+}
+
+// Log creates a proto binary log entry, and logs it to the sink.
+func (ml *MethodLogger) Log(c LogEntryConfig) {
+	m := c.toProto()
+	timestamp, _ := ptypes.TimestampProto(time.Now())
+	m.Timestamp = timestamp
+	m.CallId = ml.callID
+	m.SequenceIdWithinCall = ml.idWithinCallGen.next()
+
+	switch pay := m.Payload.(type) {
+	case *pb.GrpcLogEntry_ClientHeader:
+		m.PayloadTruncated = ml.truncateMetadata(pay.ClientHeader.GetMetadata())
+	case *pb.GrpcLogEntry_ServerHeader:
+		m.PayloadTruncated = ml.truncateMetadata(pay.ServerHeader.GetMetadata())
+	case *pb.GrpcLogEntry_Message:
+		m.PayloadTruncated = ml.truncateMessage(pay.Message)
+	}
+
+	ml.sink.Write(m)
+}
+
+func (ml *MethodLogger) truncateMetadata(mdPb *pb.Metadata) (truncated bool) {
+	if ml.headerMaxLen == maxUInt {
+		return false
+	}
+	var (
+		bytesLimit = ml.headerMaxLen
+		index      int
+	)
+	// At the end of the loop, index will be the first entry where the total
+	// size is greater than the limit:
+	//
+	// len(entry[:index]) <= ml.hdr && len(entry[:index+1]) > ml.hdr.
+	for ; index < len(mdPb.Entry); index++ {
+		entry := mdPb.Entry[index]
+		if entry.Key == "grpc-trace-bin" {
+			// "grpc-trace-bin" is a special key. It's kept in the log entry,
+			// but not counted towards the size limit.
+			continue
+		}
+		currentEntryLen := uint64(len(entry.Value))
+		if currentEntryLen > bytesLimit {
+			break
+		}
+		bytesLimit -= currentEntryLen
+	}
+	truncated = index < len(mdPb.Entry)
+	mdPb.Entry = mdPb.Entry[:index]
+	return truncated
+}
+
+func (ml *MethodLogger) truncateMessage(msgPb *pb.Message) (truncated bool) {
+	if ml.messageMaxLen == maxUInt {
+		return false
+	}
+	if ml.messageMaxLen >= uint64(len(msgPb.Data)) {
+		return false
+	}
+	msgPb.Data = msgPb.Data[:ml.messageMaxLen]
+	return true
+}
+
+// LogEntryConfig represents the configuration for binary log entry.
+type LogEntryConfig interface {
+	toProto() *pb.GrpcLogEntry
+}
+
+// ClientHeader configs the binary log entry to be a ClientHeader entry.
+type ClientHeader struct {
+	OnClientSide bool
+	Header       metadata.MD
+	MethodName   string
+	Authority    string
+	Timeout      time.Duration
+	// PeerAddr is required only when it's on server side.
+	PeerAddr net.Addr
+}
+
+func (c *ClientHeader) toProto() *pb.GrpcLogEntry {
+	// This function doesn't need to set all the fields (e.g. seq ID). The Log
+	// function will set the fields when necessary.
+	clientHeader := &pb.ClientHeader{
+		Metadata:   mdToMetadataProto(c.Header),
+		MethodName: c.MethodName,
+		Authority:  c.Authority,
+	}
+	if c.Timeout > 0 {
+		clientHeader.Timeout = ptypes.DurationProto(c.Timeout)
+	}
+	ret := &pb.GrpcLogEntry{
+		Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HEADER,
+		Payload: &pb.GrpcLogEntry_ClientHeader{
+			ClientHeader: clientHeader,
+		},
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	if c.PeerAddr != nil {
+		ret.Peer = addrToProto(c.PeerAddr)
+	}
+	return ret
+}
+
+// ServerHeader configs the binary log entry to be a ServerHeader entry.
+type ServerHeader struct {
+	OnClientSide bool
+	Header       metadata.MD
+	// PeerAddr is required only when it's on client side.
+	PeerAddr net.Addr
+}
+
+func (c *ServerHeader) toProto() *pb.GrpcLogEntry {
+	ret := &pb.GrpcLogEntry{
+		Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_HEADER,
+		Payload: &pb.GrpcLogEntry_ServerHeader{
+			ServerHeader: &pb.ServerHeader{
+				Metadata: mdToMetadataProto(c.Header),
+			},
+		},
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	if c.PeerAddr != nil {
+		ret.Peer = addrToProto(c.PeerAddr)
+	}
+	return ret
+}
+
+// ClientMessage configs the binary log entry to be a ClientMessage entry.
+type ClientMessage struct {
+	OnClientSide bool
+	// Message can be a proto.Message or []byte. Other messages formats are not
+	// supported.
+	Message interface{}
+}
+
+func (c *ClientMessage) toProto() *pb.GrpcLogEntry {
+	var (
+		data []byte
+		err  error
+	)
+	if m, ok := c.Message.(proto.Message); ok {
+		data, err = proto.Marshal(m)
+		if err != nil {
+			grpclog.Infof("binarylogging: failed to marshal proto message: %v", err)
+		}
+	} else if b, ok := c.Message.([]byte); ok {
+		data = b
+	} else {
+		grpclog.Infof("binarylogging: message to log is neither proto.message nor []byte")
+	}
+	ret := &pb.GrpcLogEntry{
+		Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_MESSAGE,
+		Payload: &pb.GrpcLogEntry_Message{
+			Message: &pb.Message{
+				Length: uint32(len(data)),
+				Data:   data,
+			},
+		},
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	return ret
+}
+
+// ServerMessage configs the binary log entry to be a ServerMessage entry.
+type ServerMessage struct {
+	OnClientSide bool
+	// Message can be a proto.Message or []byte. Other messages formats are not
+	// supported.
+	Message interface{}
+}
+
+func (c *ServerMessage) toProto() *pb.GrpcLogEntry {
+	var (
+		data []byte
+		err  error
+	)
+	if m, ok := c.Message.(proto.Message); ok {
+		data, err = proto.Marshal(m)
+		if err != nil {
+			grpclog.Infof("binarylogging: failed to marshal proto message: %v", err)
+		}
+	} else if b, ok := c.Message.([]byte); ok {
+		data = b
+	} else {
+		grpclog.Infof("binarylogging: message to log is neither proto.message nor []byte")
+	}
+	ret := &pb.GrpcLogEntry{
+		Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_MESSAGE,
+		Payload: &pb.GrpcLogEntry_Message{
+			Message: &pb.Message{
+				Length: uint32(len(data)),
+				Data:   data,
+			},
+		},
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	return ret
+}
+
+// ClientHalfClose configs the binary log entry to be a ClientHalfClose entry.
+type ClientHalfClose struct {
+	OnClientSide bool
+}
+
+func (c *ClientHalfClose) toProto() *pb.GrpcLogEntry {
+	ret := &pb.GrpcLogEntry{
+		Type:    pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HALF_CLOSE,
+		Payload: nil, // No payload here.
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	return ret
+}
+
+// ServerTrailer configs the binary log entry to be a ServerTrailer entry.
+type ServerTrailer struct {
+	OnClientSide bool
+	Trailer      metadata.MD
+	// Err is the status error.
+	Err error
+	// PeerAddr is required only when it's on client side and the RPC is trailer
+	// only.
+	PeerAddr net.Addr
+}
+
+func (c *ServerTrailer) toProto() *pb.GrpcLogEntry {
+	st, ok := status.FromError(c.Err)
+	if !ok {
+		grpclog.Info("binarylogging: error in trailer is not a status error")
+	}
+	var (
+		detailsBytes []byte
+		err          error
+	)
+	stProto := st.Proto()
+	if stProto != nil && len(stProto.Details) != 0 {
+		detailsBytes, err = proto.Marshal(stProto)
+		if err != nil {
+			grpclog.Infof("binarylogging: failed to marshal status proto: %v", err)
+		}
+	}
+	ret := &pb.GrpcLogEntry{
+		Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_TRAILER,
+		Payload: &pb.GrpcLogEntry_Trailer{
+			Trailer: &pb.Trailer{
+				Metadata:      mdToMetadataProto(c.Trailer),
+				StatusCode:    uint32(st.Code()),
+				StatusMessage: st.Message(),
+				StatusDetails: detailsBytes,
+			},
+		},
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	if c.PeerAddr != nil {
+		ret.Peer = addrToProto(c.PeerAddr)
+	}
+	return ret
+}
+
+// Cancel configs the binary log entry to be a Cancel entry.
+type Cancel struct {
+	OnClientSide bool
+}
+
+func (c *Cancel) toProto() *pb.GrpcLogEntry {
+	ret := &pb.GrpcLogEntry{
+		Type:    pb.GrpcLogEntry_EVENT_TYPE_CANCEL,
+		Payload: nil,
+	}
+	if c.OnClientSide {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT
+	} else {
+		ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER
+	}
+	return ret
+}
+
+// metadataKeyOmit returns whether the metadata entry with this key should be
+// omitted.
+func metadataKeyOmit(key string) bool {
+	switch key {
+	case "lb-token", ":path", ":authority", "content-encoding", "content-type", "user-agent", "te":
+		return true
+	case "grpc-trace-bin": // grpc-trace-bin is special because it's visiable to users.
+		return false
+	}
+	return strings.HasPrefix(key, "grpc-")
+}
+
+func mdToMetadataProto(md metadata.MD) *pb.Metadata {
+	ret := &pb.Metadata{}
+	for k, vv := range md {
+		if metadataKeyOmit(k) {
+			continue
+		}
+		for _, v := range vv {
+			ret.Entry = append(ret.Entry,
+				&pb.MetadataEntry{
+					Key:   k,
+					Value: []byte(v),
+				},
+			)
+		}
+	}
+	return ret
+}
+
+func addrToProto(addr net.Addr) *pb.Address {
+	ret := &pb.Address{}
+	switch a := addr.(type) {
+	case *net.TCPAddr:
+		if a.IP.To4() != nil {
+			ret.Type = pb.Address_TYPE_IPV4
+		} else if a.IP.To16() != nil {
+			ret.Type = pb.Address_TYPE_IPV6
+		} else {
+			ret.Type = pb.Address_TYPE_UNKNOWN
+			// Do not set address and port fields.
+			break
+		}
+		ret.Address = a.IP.String()
+		ret.IpPort = uint32(a.Port)
+	case *net.UnixAddr:
+		ret.Type = pb.Address_TYPE_UNIX
+		ret.Address = a.String()
+	default:
+		ret.Type = pb.Address_TYPE_UNKNOWN
+	}
+	return ret
+}

vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+# Copyright 2018 gRPC authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -eux -o pipefail
+
+TMP=$(mktemp -d)
+
+function finish {
+  rm -rf "$TMP"
+}
+trap finish EXIT
+
+pushd "$TMP"
+mkdir -p grpc/binarylog/grpc_binarylog_v1
+curl https://raw.githubusercontent.com/grpc/grpc-proto/master/grpc/binlog/v1/binarylog.proto > grpc/binarylog/grpc_binarylog_v1/binarylog.proto
+
+protoc --go_out=plugins=grpc,paths=source_relative:. -I. grpc/binarylog/grpc_binarylog_v1/*.proto
+popd
+rm -f ./grpc_binarylog_v1/*.pb.go
+cp "$TMP"/grpc/binarylog/grpc_binarylog_v1/*.pb.go ../../binarylog/grpc_binarylog_v1/
+

vendor/google.golang.org/grpc/internal/binarylog/sink.go

@@ -0,0 +1,162 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+	"bufio"
+	"encoding/binary"
+	"fmt"
+	"io"
+	"io/ioutil"
+	"sync"
+	"time"
+
+	"github.com/golang/protobuf/proto"
+	pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1"
+	"google.golang.org/grpc/grpclog"
+)
+
+var (
+	defaultSink Sink = &noopSink{} // TODO(blog): change this default (file in /tmp).
+)
+
+// SetDefaultSink sets the sink where binary logs will be written to.
+//
+// Not thread safe. Only set during initialization.
+func SetDefaultSink(s Sink) {
+	if defaultSink != nil {
+		defaultSink.Close()
+	}
+	defaultSink = s
+}
+
+// Sink writes log entry into the binary log sink.
+type Sink interface {
+	// Write will be called to write the log entry into the sink.
+	//
+	// It should be thread-safe so it can be called in parallel.
+	Write(*pb.GrpcLogEntry) error
+	// Close will be called when the Sink is replaced by a new Sink.
+	Close() error
+}
+
+type noopSink struct{}
+
+func (ns *noopSink) Write(*pb.GrpcLogEntry) error { return nil }
+func (ns *noopSink) Close() error                 { return nil }
+
+// newWriterSink creates a binary log sink with the given writer.
+//
+// Write() marshalls the proto message and writes it to the given writer. Each
+// message is prefixed with a 4 byte big endian unsigned integer as the length.
+//
+// No buffer is done, Close() doesn't try to close the writer.
+func newWriterSink(w io.Writer) *writerSink {
+	return &writerSink{out: w}
+}
+
+type writerSink struct {
+	out io.Writer
+}
+
+func (ws *writerSink) Write(e *pb.GrpcLogEntry) error {
+	b, err := proto.Marshal(e)
+	if err != nil {
+		grpclog.Infof("binary logging: failed to marshal proto message: %v", err)
+	}
+	hdr := make([]byte, 4)
+	binary.BigEndian.PutUint32(hdr, uint32(len(b)))
+	if _, err := ws.out.Write(hdr); err != nil {
+		return err
+	}
+	if _, err := ws.out.Write(b); err != nil {
+		return err
+	}
+	return nil
+}
+
+func (ws *writerSink) Close() error { return nil }
+
+type bufWriteCloserSink struct {
+	mu     sync.Mutex
+	closer io.Closer
+	out    *writerSink   // out is built on buf.
+	buf    *bufio.Writer // buf is kept for flush.
+
+	writeStartOnce sync.Once
+	writeTicker    *time.Ticker
+}
+
+func (fs *bufWriteCloserSink) Write(e *pb.GrpcLogEntry) error {
+	// Start the write loop when Write is called.
+	fs.writeStartOnce.Do(fs.startFlushGoroutine)
+	fs.mu.Lock()
+	if err := fs.out.Write(e); err != nil {
+		fs.mu.Unlock()
+		return err
+	}
+	fs.mu.Unlock()
+	return nil
+}
+
+const (
+	bufFlushDuration = 60 * time.Second
+)
+
+func (fs *bufWriteCloserSink) startFlushGoroutine() {
+	fs.writeTicker = time.NewTicker(bufFlushDuration)
+	go func() {
+		for range fs.writeTicker.C {
+			fs.mu.Lock()
+			fs.buf.Flush()
+			fs.mu.Unlock()
+		}
+	}()
+}
+
+func (fs *bufWriteCloserSink) Close() error {
+	if fs.writeTicker != nil {
+		fs.writeTicker.Stop()
+	}
+	fs.mu.Lock()
+	fs.buf.Flush()
+	fs.closer.Close()
+	fs.out.Close()
+	fs.mu.Unlock()
+	return nil
+}
+
+func newBufWriteCloserSink(o io.WriteCloser) Sink {
+	bufW := bufio.NewWriter(o)
+	return &bufWriteCloserSink{
+		closer: o,
+		out:    newWriterSink(bufW),
+		buf:    bufW,
+	}
+}
+
+// NewTempFileSink creates a temp file and returns a Sink that writes to this
+// file.
+func NewTempFileSink() (Sink, error) {
+	tempFile, err := ioutil.TempFile("/tmp", "grpcgo_binarylog_*.txt")
+	if err != nil {
+		return nil, fmt.Errorf("failed to create temp file: %v", err)
+	}
+	return newBufWriteCloserSink(tempFile), nil
+}

vendor/google.golang.org/grpc/internal/binarylog/util.go

@@ -0,0 +1,41 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package binarylog
+
+import (
+	"errors"
+	"strings"
+)
+
+// parseMethodName splits service and method from the input. It expects format
+// "/service/method".
+//
+// TODO: move to internal/grpcutil.
+func parseMethodName(methodName string) (service, method string, _ error) {
+	if !strings.HasPrefix(methodName, "/") {
+		return "", "", errors.New("invalid method name: should start with /")
+	}
+	methodName = methodName[1:]
+
+	pos := strings.LastIndex(methodName, "/")
+	if pos < 0 {
+		return "", "", errors.New("invalid method name: suffix /method is missing")
+	}
+	return methodName[:pos], methodName[pos+1:], nil
+}

vendor/google.golang.org/grpc/internal/channelz/funcs.go

@@ -0,0 +1,699 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package channelz defines APIs for enabling channelz service, entry
+// registration/deletion, and accessing channelz data. It also defines channelz
+// metric struct formats.
+//
+// All APIs in this package are experimental.
+package channelz
+
+import (
+	"sort"
+	"sync"
+	"sync/atomic"
+	"time"
+
+	"google.golang.org/grpc/grpclog"
+)
+
+const (
+	defaultMaxTraceEntry int32 = 30
+)
+
+var (
+	db    dbWrapper
+	idGen idGenerator
+	// EntryPerPage defines the number of channelz entries to be shown on a web page.
+	EntryPerPage  = int64(50)
+	curState      int32
+	maxTraceEntry = defaultMaxTraceEntry
+)
+
+// TurnOn turns on channelz data collection.
+func TurnOn() {
+	if !IsOn() {
+		NewChannelzStorage()
+		atomic.StoreInt32(&curState, 1)
+	}
+}
+
+// IsOn returns whether channelz data collection is on.
+func IsOn() bool {
+	return atomic.CompareAndSwapInt32(&curState, 1, 1)
+}
+
+// SetMaxTraceEntry sets maximum number of trace entry per entity (i.e. channel/subchannel).
+// Setting it to 0 will disable channel tracing.
+func SetMaxTraceEntry(i int32) {
+	atomic.StoreInt32(&maxTraceEntry, i)
+}
+
+// ResetMaxTraceEntryToDefault resets the maximum number of trace entry per entity to default.
+func ResetMaxTraceEntryToDefault() {
+	atomic.StoreInt32(&maxTraceEntry, defaultMaxTraceEntry)
+}
+
+func getMaxTraceEntry() int {
+	i := atomic.LoadInt32(&maxTraceEntry)
+	return int(i)
+}
+
+// dbWarpper wraps around a reference to internal channelz data storage, and
+// provide synchronized functionality to set and get the reference.
+type dbWrapper struct {
+	mu sync.RWMutex
+	DB *channelMap
+}
+
+func (d *dbWrapper) set(db *channelMap) {
+	d.mu.Lock()
+	d.DB = db
+	d.mu.Unlock()
+}
+
+func (d *dbWrapper) get() *channelMap {
+	d.mu.RLock()
+	defer d.mu.RUnlock()
+	return d.DB
+}
+
+// NewChannelzStorage initializes channelz data storage and id generator.
+//
+// Note: This function is exported for testing purpose only. User should not call
+// it in most cases.
+func NewChannelzStorage() {
+	db.set(&channelMap{
+		topLevelChannels: make(map[int64]struct{}),
+		channels:         make(map[int64]*channel),
+		listenSockets:    make(map[int64]*listenSocket),
+		normalSockets:    make(map[int64]*normalSocket),
+		servers:          make(map[int64]*server),
+		subChannels:      make(map[int64]*subChannel),
+	})
+	idGen.reset()
+}
+
+// GetTopChannels returns a slice of top channel's ChannelMetric, along with a
+// boolean indicating whether there's more top channels to be queried for.
+//
+// The arg id specifies that only top channel with id at or above it will be included
+// in the result. The returned slice is up to a length of the arg maxResults or
+// EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) {
+	return db.get().GetTopChannels(id, maxResults)
+}
+
+// GetServers returns a slice of server's ServerMetric, along with a
+// boolean indicating whether there's more servers to be queried for.
+//
+// The arg id specifies that only server with id at or above it will be included
+// in the result. The returned slice is up to a length of the arg maxResults or
+// EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetServers(id int64, maxResults int64) ([]*ServerMetric, bool) {
+	return db.get().GetServers(id, maxResults)
+}
+
+// GetServerSockets returns a slice of server's (identified by id) normal socket's
+// SocketMetric, along with a boolean indicating whether there's more sockets to
+// be queried for.
+//
+// The arg startID specifies that only sockets with id at or above it will be
+// included in the result. The returned slice is up to a length of the arg maxResults
+// or EntryPerPage if maxResults is zero, and is sorted in ascending id order.
+func GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) {
+	return db.get().GetServerSockets(id, startID, maxResults)
+}
+
+// GetChannel returns the ChannelMetric for the channel (identified by id).
+func GetChannel(id int64) *ChannelMetric {
+	return db.get().GetChannel(id)
+}
+
+// GetSubChannel returns the SubChannelMetric for the subchannel (identified by id).
+func GetSubChannel(id int64) *SubChannelMetric {
+	return db.get().GetSubChannel(id)
+}
+
+// GetSocket returns the SocketInternalMetric for the socket (identified by id).
+func GetSocket(id int64) *SocketMetric {
+	return db.get().GetSocket(id)
+}
+
+// GetServer returns the ServerMetric for the server (identified by id).
+func GetServer(id int64) *ServerMetric {
+	return db.get().GetServer(id)
+}
+
+// RegisterChannel registers the given channel c in channelz database with ref
+// as its reference name, and add it to the child list of its parent (identified
+// by pid). pid = 0 means no parent. It returns the unique channelz tracking id
+// assigned to this channel.
+func RegisterChannel(c Channel, pid int64, ref string) int64 {
+	id := idGen.genID()
+	cn := &channel{
+		refName:     ref,
+		c:           c,
+		subChans:    make(map[int64]string),
+		nestedChans: make(map[int64]string),
+		id:          id,
+		pid:         pid,
+		trace:       &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())},
+	}
+	if pid == 0 {
+		db.get().addChannel(id, cn, true, pid, ref)
+	} else {
+		db.get().addChannel(id, cn, false, pid, ref)
+	}
+	return id
+}
+
+// RegisterSubChannel registers the given channel c in channelz database with ref
+// as its reference name, and add it to the child list of its parent (identified
+// by pid). It returns the unique channelz tracking id assigned to this subchannel.
+func RegisterSubChannel(c Channel, pid int64, ref string) int64 {
+	if pid == 0 {
+		grpclog.Error("a SubChannel's parent id cannot be 0")
+		return 0
+	}
+	id := idGen.genID()
+	sc := &subChannel{
+		refName: ref,
+		c:       c,
+		sockets: make(map[int64]string),
+		id:      id,
+		pid:     pid,
+		trace:   &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())},
+	}
+	db.get().addSubChannel(id, sc, pid, ref)
+	return id
+}
+
+// RegisterServer registers the given server s in channelz database. It returns
+// the unique channelz tracking id assigned to this server.
+func RegisterServer(s Server, ref string) int64 {
+	id := idGen.genID()
+	svr := &server{
+		refName:       ref,
+		s:             s,
+		sockets:       make(map[int64]string),
+		listenSockets: make(map[int64]string),
+		id:            id,
+	}
+	db.get().addServer(id, svr)
+	return id
+}
+
+// RegisterListenSocket registers the given listen socket s in channelz database
+// with ref as its reference name, and add it to the child list of its parent
+// (identified by pid). It returns the unique channelz tracking id assigned to
+// this listen socket.
+func RegisterListenSocket(s Socket, pid int64, ref string) int64 {
+	if pid == 0 {
+		grpclog.Error("a ListenSocket's parent id cannot be 0")
+		return 0
+	}
+	id := idGen.genID()
+	ls := &listenSocket{refName: ref, s: s, id: id, pid: pid}
+	db.get().addListenSocket(id, ls, pid, ref)
+	return id
+}
+
+// RegisterNormalSocket registers the given normal socket s in channelz database
+// with ref as its reference name, and add it to the child list of its parent
+// (identified by pid). It returns the unique channelz tracking id assigned to
+// this normal socket.
+func RegisterNormalSocket(s Socket, pid int64, ref string) int64 {
+	if pid == 0 {
+		grpclog.Error("a NormalSocket's parent id cannot be 0")
+		return 0
+	}
+	id := idGen.genID()
+	ns := &normalSocket{refName: ref, s: s, id: id, pid: pid}
+	db.get().addNormalSocket(id, ns, pid, ref)
+	return id
+}
+
+// RemoveEntry removes an entry with unique channelz trakcing id to be id from
+// channelz database.
+func RemoveEntry(id int64) {
+	db.get().removeEntry(id)
+}
+
+// TraceEventDesc is what the caller of AddTraceEvent should provide to describe the event to be added
+// to the channel trace.
+// The Parent field is optional. It is used for event that will be recorded in the entity's parent
+// trace also.
+type TraceEventDesc struct {
+	Desc     string
+	Severity Severity
+	Parent   *TraceEventDesc
+}
+
+// AddTraceEvent adds trace related to the entity with specified id, using the provided TraceEventDesc.
+func AddTraceEvent(id int64, desc *TraceEventDesc) {
+	if getMaxTraceEntry() == 0 {
+		return
+	}
+	db.get().traceEvent(id, desc)
+}
+
+// channelMap is the storage data structure for channelz.
+// Methods of channelMap can be divided in two two categories with respect to locking.
+// 1. Methods acquire the global lock.
+// 2. Methods that can only be called when global lock is held.
+// A second type of method need always to be called inside a first type of method.
+type channelMap struct {
+	mu               sync.RWMutex
+	topLevelChannels map[int64]struct{}
+	servers          map[int64]*server
+	channels         map[int64]*channel
+	subChannels      map[int64]*subChannel
+	listenSockets    map[int64]*listenSocket
+	normalSockets    map[int64]*normalSocket
+}
+
+func (c *channelMap) addServer(id int64, s *server) {
+	c.mu.Lock()
+	s.cm = c
+	c.servers[id] = s
+	c.mu.Unlock()
+}
+
+func (c *channelMap) addChannel(id int64, cn *channel, isTopChannel bool, pid int64, ref string) {
+	c.mu.Lock()
+	cn.cm = c
+	cn.trace.cm = c
+	c.channels[id] = cn
+	if isTopChannel {
+		c.topLevelChannels[id] = struct{}{}
+	} else {
+		c.findEntry(pid).addChild(id, cn)
+	}
+	c.mu.Unlock()
+}
+
+func (c *channelMap) addSubChannel(id int64, sc *subChannel, pid int64, ref string) {
+	c.mu.Lock()
+	sc.cm = c
+	sc.trace.cm = c
+	c.subChannels[id] = sc
+	c.findEntry(pid).addChild(id, sc)
+	c.mu.Unlock()
+}
+
+func (c *channelMap) addListenSocket(id int64, ls *listenSocket, pid int64, ref string) {
+	c.mu.Lock()
+	ls.cm = c
+	c.listenSockets[id] = ls
+	c.findEntry(pid).addChild(id, ls)
+	c.mu.Unlock()
+}
+
+func (c *channelMap) addNormalSocket(id int64, ns *normalSocket, pid int64, ref string) {
+	c.mu.Lock()
+	ns.cm = c
+	c.normalSockets[id] = ns
+	c.findEntry(pid).addChild(id, ns)
+	c.mu.Unlock()
+}
+
+// removeEntry triggers the removal of an entry, which may not indeed delete the entry, if it has to
+// wait on the deletion of its children and until no other entity's channel trace references it.
+// It may lead to a chain of entry deletion. For example, deleting the last socket of a gracefully
+// shutting down server will lead to the server being also deleted.
+func (c *channelMap) removeEntry(id int64) {
+	c.mu.Lock()
+	c.findEntry(id).triggerDelete()
+	c.mu.Unlock()
+}
+
+// c.mu must be held by the caller
+func (c *channelMap) decrTraceRefCount(id int64) {
+	e := c.findEntry(id)
+	if v, ok := e.(tracedChannel); ok {
+		v.decrTraceRefCount()
+		e.deleteSelfIfReady()
+	}
+}
+
+// c.mu must be held by the caller.
+func (c *channelMap) findEntry(id int64) entry {
+	var v entry
+	var ok bool
+	if v, ok = c.channels[id]; ok {
+		return v
+	}
+	if v, ok = c.subChannels[id]; ok {
+		return v
+	}
+	if v, ok = c.servers[id]; ok {
+		return v
+	}
+	if v, ok = c.listenSockets[id]; ok {
+		return v
+	}
+	if v, ok = c.normalSockets[id]; ok {
+		return v
+	}
+	return &dummyEntry{idNotFound: id}
+}
+
+// c.mu must be held by the caller
+// deleteEntry simply deletes an entry from the channelMap. Before calling this
+// method, caller must check this entry is ready to be deleted, i.e removeEntry()
+// has been called on it, and no children still exist.
+// Conditionals are ordered by the expected frequency of deletion of each entity
+// type, in order to optimize performance.
+func (c *channelMap) deleteEntry(id int64) {
+	var ok bool
+	if _, ok = c.normalSockets[id]; ok {
+		delete(c.normalSockets, id)
+		return
+	}
+	if _, ok = c.subChannels[id]; ok {
+		delete(c.subChannels, id)
+		return
+	}
+	if _, ok = c.channels[id]; ok {
+		delete(c.channels, id)
+		delete(c.topLevelChannels, id)
+		return
+	}
+	if _, ok = c.listenSockets[id]; ok {
+		delete(c.listenSockets, id)
+		return
+	}
+	if _, ok = c.servers[id]; ok {
+		delete(c.servers, id)
+		return
+	}
+}
+
+func (c *channelMap) traceEvent(id int64, desc *TraceEventDesc) {
+	c.mu.Lock()
+	child := c.findEntry(id)
+	childTC, ok := child.(tracedChannel)
+	if !ok {
+		c.mu.Unlock()
+		return
+	}
+	childTC.getChannelTrace().append(&TraceEvent{Desc: desc.Desc, Severity: desc.Severity, Timestamp: time.Now()})
+	if desc.Parent != nil {
+		parent := c.findEntry(child.getParentID())
+		var chanType RefChannelType
+		switch child.(type) {
+		case *channel:
+			chanType = RefChannel
+		case *subChannel:
+			chanType = RefSubChannel
+		}
+		if parentTC, ok := parent.(tracedChannel); ok {
+			parentTC.getChannelTrace().append(&TraceEvent{
+				Desc:      desc.Parent.Desc,
+				Severity:  desc.Parent.Severity,
+				Timestamp: time.Now(),
+				RefID:     id,
+				RefName:   childTC.getRefName(),
+				RefType:   chanType,
+			})
+			childTC.incrTraceRefCount()
+		}
+	}
+	c.mu.Unlock()
+}
+
+type int64Slice []int64
+
+func (s int64Slice) Len() int           { return len(s) }
+func (s int64Slice) Swap(i, j int)      { s[i], s[j] = s[j], s[i] }
+func (s int64Slice) Less(i, j int) bool { return s[i] < s[j] }
+
+func copyMap(m map[int64]string) map[int64]string {
+	n := make(map[int64]string)
+	for k, v := range m {
+		n[k] = v
+	}
+	return n
+}
+
+func min(a, b int64) int64 {
+	if a < b {
+		return a
+	}
+	return b
+}
+
+func (c *channelMap) GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) {
+	if maxResults <= 0 {
+		maxResults = EntryPerPage
+	}
+	c.mu.RLock()
+	l := int64(len(c.topLevelChannels))
+	ids := make([]int64, 0, l)
+	cns := make([]*channel, 0, min(l, maxResults))
+
+	for k := range c.topLevelChannels {
+		ids = append(ids, k)
+	}
+	sort.Sort(int64Slice(ids))
+	idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id })
+	count := int64(0)
+	var end bool
+	var t []*ChannelMetric
+	for i, v := range ids[idx:] {
+		if count == maxResults {
+			break
+		}
+		if cn, ok := c.channels[v]; ok {
+			cns = append(cns, cn)
+			t = append(t, &ChannelMetric{
+				NestedChans: copyMap(cn.nestedChans),
+				SubChans:    copyMap(cn.subChans),
+			})
+			count++
+		}
+		if i == len(ids[idx:])-1 {
+			end = true
+			break
+		}
+	}
+	c.mu.RUnlock()
+	if count == 0 {
+		end = true
+	}
+
+	for i, cn := range cns {
+		t[i].ChannelData = cn.c.ChannelzMetric()
+		t[i].ID = cn.id
+		t[i].RefName = cn.refName
+		t[i].Trace = cn.trace.dumpData()
+	}
+	return t, end
+}
+
+func (c *channelMap) GetServers(id, maxResults int64) ([]*ServerMetric, bool) {
+	if maxResults <= 0 {
+		maxResults = EntryPerPage
+	}
+	c.mu.RLock()
+	l := int64(len(c.servers))
+	ids := make([]int64, 0, l)
+	ss := make([]*server, 0, min(l, maxResults))
+	for k := range c.servers {
+		ids = append(ids, k)
+	}
+	sort.Sort(int64Slice(ids))
+	idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id })
+	count := int64(0)
+	var end bool
+	var s []*ServerMetric
+	for i, v := range ids[idx:] {
+		if count == maxResults {
+			break
+		}
+		if svr, ok := c.servers[v]; ok {
+			ss = append(ss, svr)
+			s = append(s, &ServerMetric{
+				ListenSockets: copyMap(svr.listenSockets),
+			})
+			count++
+		}
+		if i == len(ids[idx:])-1 {
+			end = true
+			break
+		}
+	}
+	c.mu.RUnlock()
+	if count == 0 {
+		end = true
+	}
+
+	for i, svr := range ss {
+		s[i].ServerData = svr.s.ChannelzMetric()
+		s[i].ID = svr.id
+		s[i].RefName = svr.refName
+	}
+	return s, end
+}
+
+func (c *channelMap) GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) {
+	if maxResults <= 0 {
+		maxResults = EntryPerPage
+	}
+	var svr *server
+	var ok bool
+	c.mu.RLock()
+	if svr, ok = c.servers[id]; !ok {
+		// server with id doesn't exist.
+		c.mu.RUnlock()
+		return nil, true
+	}
+	svrskts := svr.sockets
+	l := int64(len(svrskts))
+	ids := make([]int64, 0, l)
+	sks := make([]*normalSocket, 0, min(l, maxResults))
+	for k := range svrskts {
+		ids = append(ids, k)
+	}
+	sort.Sort(int64Slice(ids))
+	idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= startID })
+	count := int64(0)
+	var end bool
+	for i, v := range ids[idx:] {
+		if count == maxResults {
+			break
+		}
+		if ns, ok := c.normalSockets[v]; ok {
+			sks = append(sks, ns)
+			count++
+		}
+		if i == len(ids[idx:])-1 {
+			end = true
+			break
+		}
+	}
+	c.mu.RUnlock()
+	if count == 0 {
+		end = true
+	}
+	var s []*SocketMetric
+	for _, ns := range sks {
+		sm := &SocketMetric{}
+		sm.SocketData = ns.s.ChannelzMetric()
+		sm.ID = ns.id
+		sm.RefName = ns.refName
+		s = append(s, sm)
+	}
+	return s, end
+}
+
+func (c *channelMap) GetChannel(id int64) *ChannelMetric {
+	cm := &ChannelMetric{}
+	var cn *channel
+	var ok bool
+	c.mu.RLock()
+	if cn, ok = c.channels[id]; !ok {
+		// channel with id doesn't exist.
+		c.mu.RUnlock()
+		return nil
+	}
+	cm.NestedChans = copyMap(cn.nestedChans)
+	cm.SubChans = copyMap(cn.subChans)
+	// cn.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of cn.c when
+	// holding the lock to prevent potential data race.
+	chanCopy := cn.c
+	c.mu.RUnlock()
+	cm.ChannelData = chanCopy.ChannelzMetric()
+	cm.ID = cn.id
+	cm.RefName = cn.refName
+	cm.Trace = cn.trace.dumpData()
+	return cm
+}
+
+func (c *channelMap) GetSubChannel(id int64) *SubChannelMetric {
+	cm := &SubChannelMetric{}
+	var sc *subChannel
+	var ok bool
+	c.mu.RLock()
+	if sc, ok = c.subChannels[id]; !ok {
+		// subchannel with id doesn't exist.
+		c.mu.RUnlock()
+		return nil
+	}
+	cm.Sockets = copyMap(sc.sockets)
+	// sc.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of sc.c when
+	// holding the lock to prevent potential data race.
+	chanCopy := sc.c
+	c.mu.RUnlock()
+	cm.ChannelData = chanCopy.ChannelzMetric()
+	cm.ID = sc.id
+	cm.RefName = sc.refName
+	cm.Trace = sc.trace.dumpData()
+	return cm
+}
+
+func (c *channelMap) GetSocket(id int64) *SocketMetric {
+	sm := &SocketMetric{}
+	c.mu.RLock()
+	if ls, ok := c.listenSockets[id]; ok {
+		c.mu.RUnlock()
+		sm.SocketData = ls.s.ChannelzMetric()
+		sm.ID = ls.id
+		sm.RefName = ls.refName
+		return sm
+	}
+	if ns, ok := c.normalSockets[id]; ok {
+		c.mu.RUnlock()
+		sm.SocketData = ns.s.ChannelzMetric()
+		sm.ID = ns.id
+		sm.RefName = ns.refName
+		return sm
+	}
+	c.mu.RUnlock()
+	return nil
+}
+
+func (c *channelMap) GetServer(id int64) *ServerMetric {
+	sm := &ServerMetric{}
+	var svr *server
+	var ok bool
+	c.mu.RLock()
+	if svr, ok = c.servers[id]; !ok {
+		c.mu.RUnlock()
+		return nil
+	}
+	sm.ListenSockets = copyMap(svr.listenSockets)
+	c.mu.RUnlock()
+	sm.ID = svr.id
+	sm.RefName = svr.refName
+	sm.ServerData = svr.s.ChannelzMetric()
+	return sm
+}
+
+type idGenerator struct {
+	id int64
+}
+
+func (i *idGenerator) reset() {
+	atomic.StoreInt64(&i.id, 0)
+}
+
+func (i *idGenerator) genID() int64 {
+	return atomic.AddInt64(&i.id, 1)
+}

vendor/google.golang.org/grpc/internal/channelz/types.go

@@ -0,0 +1,702 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+	"net"
+	"sync"
+	"sync/atomic"
+	"time"
+
+	"google.golang.org/grpc/connectivity"
+	"google.golang.org/grpc/credentials"
+	"google.golang.org/grpc/grpclog"
+)
+
+// entry represents a node in the channelz database.
+type entry interface {
+	// addChild adds a child e, whose channelz id is id to child list
+	addChild(id int64, e entry)
+	// deleteChild deletes a child with channelz id to be id from child list
+	deleteChild(id int64)
+	// triggerDelete tries to delete self from channelz database. However, if child
+	// list is not empty, then deletion from the database is on hold until the last
+	// child is deleted from database.
+	triggerDelete()
+	// deleteSelfIfReady check whether triggerDelete() has been called before, and whether child
+	// list is now empty. If both conditions are met, then delete self from database.
+	deleteSelfIfReady()
+	// getParentID returns parent ID of the entry. 0 value parent ID means no parent.
+	getParentID() int64
+}
+
+// dummyEntry is a fake entry to handle entry not found case.
+type dummyEntry struct {
+	idNotFound int64
+}
+
+func (d *dummyEntry) addChild(id int64, e entry) {
+	// Note: It is possible for a normal program to reach here under race condition.
+	// For example, there could be a race between ClientConn.Close() info being propagated
+	// to addrConn and http2Client. ClientConn.Close() cancel the context and result
+	// in http2Client to error. The error info is then caught by transport monitor
+	// and before addrConn.tearDown() is called in side ClientConn.Close(). Therefore,
+	// the addrConn will create a new transport. And when registering the new transport in
+	// channelz, its parent addrConn could have already been torn down and deleted
+	// from channelz tracking, and thus reach the code here.
+	grpclog.Infof("attempt to add child of type %T with id %d to a parent (id=%d) that doesn't currently exist", e, id, d.idNotFound)
+}
+
+func (d *dummyEntry) deleteChild(id int64) {
+	// It is possible for a normal program to reach here under race condition.
+	// Refer to the example described in addChild().
+	grpclog.Infof("attempt to delete child with id %d from a parent (id=%d) that doesn't currently exist", id, d.idNotFound)
+}
+
+func (d *dummyEntry) triggerDelete() {
+	grpclog.Warningf("attempt to delete an entry (id=%d) that doesn't currently exist", d.idNotFound)
+}
+
+func (*dummyEntry) deleteSelfIfReady() {
+	// code should not reach here. deleteSelfIfReady is always called on an existing entry.
+}
+
+func (*dummyEntry) getParentID() int64 {
+	return 0
+}
+
+// ChannelMetric defines the info channelz provides for a specific Channel, which
+// includes ChannelInternalMetric and channelz-specific data, such as channelz id,
+// child list, etc.
+type ChannelMetric struct {
+	// ID is the channelz id of this channel.
+	ID int64
+	// RefName is the human readable reference string of this channel.
+	RefName string
+	// ChannelData contains channel internal metric reported by the channel through
+	// ChannelzMetric().
+	ChannelData *ChannelInternalMetric
+	// NestedChans tracks the nested channel type children of this channel in the format of
+	// a map from nested channel channelz id to corresponding reference string.
+	NestedChans map[int64]string
+	// SubChans tracks the subchannel type children of this channel in the format of a
+	// map from subchannel channelz id to corresponding reference string.
+	SubChans map[int64]string
+	// Sockets tracks the socket type children of this channel in the format of a map
+	// from socket channelz id to corresponding reference string.
+	// Note current grpc implementation doesn't allow channel having sockets directly,
+	// therefore, this is field is unused.
+	Sockets map[int64]string
+	// Trace contains the most recent traced events.
+	Trace *ChannelTrace
+}
+
+// SubChannelMetric defines the info channelz provides for a specific SubChannel,
+// which includes ChannelInternalMetric and channelz-specific data, such as
+// channelz id, child list, etc.
+type SubChannelMetric struct {
+	// ID is the channelz id of this subchannel.
+	ID int64
+	// RefName is the human readable reference string of this subchannel.
+	RefName string
+	// ChannelData contains subchannel internal metric reported by the subchannel
+	// through ChannelzMetric().
+	ChannelData *ChannelInternalMetric
+	// NestedChans tracks the nested channel type children of this subchannel in the format of
+	// a map from nested channel channelz id to corresponding reference string.
+	// Note current grpc implementation doesn't allow subchannel to have nested channels
+	// as children, therefore, this field is unused.
+	NestedChans map[int64]string
+	// SubChans tracks the subchannel type children of this subchannel in the format of a
+	// map from subchannel channelz id to corresponding reference string.
+	// Note current grpc implementation doesn't allow subchannel to have subchannels
+	// as children, therefore, this field is unused.
+	SubChans map[int64]string
+	// Sockets tracks the socket type children of this subchannel in the format of a map
+	// from socket channelz id to corresponding reference string.
+	Sockets map[int64]string
+	// Trace contains the most recent traced events.
+	Trace *ChannelTrace
+}
+
+// ChannelInternalMetric defines the struct that the implementor of Channel interface
+// should return from ChannelzMetric().
+type ChannelInternalMetric struct {
+	// current connectivity state of the channel.
+	State connectivity.State
+	// The target this channel originally tried to connect to.  May be absent
+	Target string
+	// The number of calls started on the channel.
+	CallsStarted int64
+	// The number of calls that have completed with an OK status.
+	CallsSucceeded int64
+	// The number of calls that have a completed with a non-OK status.
+	CallsFailed int64
+	// The last time a call was started on the channel.
+	LastCallStartedTimestamp time.Time
+}
+
+// ChannelTrace stores traced events on a channel/subchannel and related info.
+type ChannelTrace struct {
+	// EventNum is the number of events that ever got traced (i.e. including those that have been deleted)
+	EventNum int64
+	// CreationTime is the creation time of the trace.
+	CreationTime time.Time
+	// Events stores the most recent trace events (up to $maxTraceEntry, newer event will overwrite the
+	// oldest one)
+	Events []*TraceEvent
+}
+
+// TraceEvent represent a single trace event
+type TraceEvent struct {
+	// Desc is a simple description of the trace event.
+	Desc string
+	// Severity states the severity of this trace event.
+	Severity Severity
+	// Timestamp is the event time.
+	Timestamp time.Time
+	// RefID is the id of the entity that gets referenced in the event. RefID is 0 if no other entity is
+	// involved in this event.
+	// e.g. SubChannel (id: 4[]) Created. --> RefID = 4, RefName = "" (inside [])
+	RefID int64
+	// RefName is the reference name for the entity that gets referenced in the event.
+	RefName string
+	// RefType indicates the referenced entity type, i.e Channel or SubChannel.
+	RefType RefChannelType
+}
+
+// Channel is the interface that should be satisfied in order to be tracked by
+// channelz as Channel or SubChannel.
+type Channel interface {
+	ChannelzMetric() *ChannelInternalMetric
+}
+
+type dummyChannel struct{}
+
+func (d *dummyChannel) ChannelzMetric() *ChannelInternalMetric {
+	return &ChannelInternalMetric{}
+}
+
+type channel struct {
+	refName     string
+	c           Channel
+	closeCalled bool
+	nestedChans map[int64]string
+	subChans    map[int64]string
+	id          int64
+	pid         int64
+	cm          *channelMap
+	trace       *channelTrace
+	// traceRefCount is the number of trace events that reference this channel.
+	// Non-zero traceRefCount means the trace of this channel cannot be deleted.
+	traceRefCount int32
+}
+
+func (c *channel) addChild(id int64, e entry) {
+	switch v := e.(type) {
+	case *subChannel:
+		c.subChans[id] = v.refName
+	case *channel:
+		c.nestedChans[id] = v.refName
+	default:
+		grpclog.Errorf("cannot add a child (id = %d) of type %T to a channel", id, e)
+	}
+}
+
+func (c *channel) deleteChild(id int64) {
+	delete(c.subChans, id)
+	delete(c.nestedChans, id)
+	c.deleteSelfIfReady()
+}
+
+func (c *channel) triggerDelete() {
+	c.closeCalled = true
+	c.deleteSelfIfReady()
+}
+
+func (c *channel) getParentID() int64 {
+	return c.pid
+}
+
+// deleteSelfFromTree tries to delete the channel from the channelz entry relation tree, which means
+// deleting the channel reference from its parent's child list.
+//
+// In order for a channel to be deleted from the tree, it must meet the criteria that, removal of the
+// corresponding grpc object has been invoked, and the channel does not have any children left.
+//
+// The returned boolean value indicates whether the channel has been successfully deleted from tree.
+func (c *channel) deleteSelfFromTree() (deleted bool) {
+	if !c.closeCalled || len(c.subChans)+len(c.nestedChans) != 0 {
+		return false
+	}
+	// not top channel
+	if c.pid != 0 {
+		c.cm.findEntry(c.pid).deleteChild(c.id)
+	}
+	return true
+}
+
+// deleteSelfFromMap checks whether it is valid to delete the channel from the map, which means
+// deleting the channel from channelz's tracking entirely. Users can no longer use id to query the
+// channel, and its memory will be garbage collected.
+//
+// The trace reference count of the channel must be 0 in order to be deleted from the map. This is
+// specified in the channel tracing gRFC that as long as some other trace has reference to an entity,
+// the trace of the referenced entity must not be deleted. In order to release the resource allocated
+// by grpc, the reference to the grpc object is reset to a dummy object.
+//
+// deleteSelfFromMap must be called after deleteSelfFromTree returns true.
+//
+// It returns a bool to indicate whether the channel can be safely deleted from map.
+func (c *channel) deleteSelfFromMap() (delete bool) {
+	if c.getTraceRefCount() != 0 {
+		c.c = &dummyChannel{}
+		return false
+	}
+	return true
+}
+
+// deleteSelfIfReady tries to delete the channel itself from the channelz database.
+// The delete process includes two steps:
+// 1. delete the channel from the entry relation tree, i.e. delete the channel reference from its
+//    parent's child list.
+// 2. delete the channel from the map, i.e. delete the channel entirely from channelz. Lookup by id
+//    will return entry not found error.
+func (c *channel) deleteSelfIfReady() {
+	if !c.deleteSelfFromTree() {
+		return
+	}
+	if !c.deleteSelfFromMap() {
+		return
+	}
+	c.cm.deleteEntry(c.id)
+	c.trace.clear()
+}
+
+func (c *channel) getChannelTrace() *channelTrace {
+	return c.trace
+}
+
+func (c *channel) incrTraceRefCount() {
+	atomic.AddInt32(&c.traceRefCount, 1)
+}
+
+func (c *channel) decrTraceRefCount() {
+	atomic.AddInt32(&c.traceRefCount, -1)
+}
+
+func (c *channel) getTraceRefCount() int {
+	i := atomic.LoadInt32(&c.traceRefCount)
+	return int(i)
+}
+
+func (c *channel) getRefName() string {
+	return c.refName
+}
+
+type subChannel struct {
+	refName       string
+	c             Channel
+	closeCalled   bool
+	sockets       map[int64]string
+	id            int64
+	pid           int64
+	cm            *channelMap
+	trace         *channelTrace
+	traceRefCount int32
+}
+
+func (sc *subChannel) addChild(id int64, e entry) {
+	if v, ok := e.(*normalSocket); ok {
+		sc.sockets[id] = v.refName
+	} else {
+		grpclog.Errorf("cannot add a child (id = %d) of type %T to a subChannel", id, e)
+	}
+}
+
+func (sc *subChannel) deleteChild(id int64) {
+	delete(sc.sockets, id)
+	sc.deleteSelfIfReady()
+}
+
+func (sc *subChannel) triggerDelete() {
+	sc.closeCalled = true
+	sc.deleteSelfIfReady()
+}
+
+func (sc *subChannel) getParentID() int64 {
+	return sc.pid
+}
+
+// deleteSelfFromTree tries to delete the subchannel from the channelz entry relation tree, which
+// means deleting the subchannel reference from its parent's child list.
+//
+// In order for a subchannel to be deleted from the tree, it must meet the criteria that, removal of
+// the corresponding grpc object has been invoked, and the subchannel does not have any children left.
+//
+// The returned boolean value indicates whether the channel has been successfully deleted from tree.
+func (sc *subChannel) deleteSelfFromTree() (deleted bool) {
+	if !sc.closeCalled || len(sc.sockets) != 0 {
+		return false
+	}
+	sc.cm.findEntry(sc.pid).deleteChild(sc.id)
+	return true
+}
+
+// deleteSelfFromMap checks whether it is valid to delete the subchannel from the map, which means
+// deleting the subchannel from channelz's tracking entirely. Users can no longer use id to query
+// the subchannel, and its memory will be garbage collected.
+//
+// The trace reference count of the subchannel must be 0 in order to be deleted from the map. This is
+// specified in the channel tracing gRFC that as long as some other trace has reference to an entity,
+// the trace of the referenced entity must not be deleted. In order to release the resource allocated
+// by grpc, the reference to the grpc object is reset to a dummy object.
+//
+// deleteSelfFromMap must be called after deleteSelfFromTree returns true.
+//
+// It returns a bool to indicate whether the channel can be safely deleted from map.
+func (sc *subChannel) deleteSelfFromMap() (delete bool) {
+	if sc.getTraceRefCount() != 0 {
+		// free the grpc struct (i.e. addrConn)
+		sc.c = &dummyChannel{}
+		return false
+	}
+	return true
+}
+
+// deleteSelfIfReady tries to delete the subchannel itself from the channelz database.
+// The delete process includes two steps:
+// 1. delete the subchannel from the entry relation tree, i.e. delete the subchannel reference from
+//    its parent's child list.
+// 2. delete the subchannel from the map, i.e. delete the subchannel entirely from channelz. Lookup
+//    by id will return entry not found error.
+func (sc *subChannel) deleteSelfIfReady() {
+	if !sc.deleteSelfFromTree() {
+		return
+	}
+	if !sc.deleteSelfFromMap() {
+		return
+	}
+	sc.cm.deleteEntry(sc.id)
+	sc.trace.clear()
+}
+
+func (sc *subChannel) getChannelTrace() *channelTrace {
+	return sc.trace
+}
+
+func (sc *subChannel) incrTraceRefCount() {
+	atomic.AddInt32(&sc.traceRefCount, 1)
+}
+
+func (sc *subChannel) decrTraceRefCount() {
+	atomic.AddInt32(&sc.traceRefCount, -1)
+}
+
+func (sc *subChannel) getTraceRefCount() int {
+	i := atomic.LoadInt32(&sc.traceRefCount)
+	return int(i)
+}
+
+func (sc *subChannel) getRefName() string {
+	return sc.refName
+}
+
+// SocketMetric defines the info channelz provides for a specific Socket, which
+// includes SocketInternalMetric and channelz-specific data, such as channelz id, etc.
+type SocketMetric struct {
+	// ID is the channelz id of this socket.
+	ID int64
+	// RefName is the human readable reference string of this socket.
+	RefName string
+	// SocketData contains socket internal metric reported by the socket through
+	// ChannelzMetric().
+	SocketData *SocketInternalMetric
+}
+
+// SocketInternalMetric defines the struct that the implementor of Socket interface
+// should return from ChannelzMetric().
+type SocketInternalMetric struct {
+	// The number of streams that have been started.
+	StreamsStarted int64
+	// The number of streams that have ended successfully:
+	// On client side, receiving frame with eos bit set.
+	// On server side, sending frame with eos bit set.
+	StreamsSucceeded int64
+	// The number of streams that have ended unsuccessfully:
+	// On client side, termination without receiving frame with eos bit set.
+	// On server side, termination without sending frame with eos bit set.
+	StreamsFailed int64
+	// The number of messages successfully sent on this socket.
+	MessagesSent     int64
+	MessagesReceived int64
+	// The number of keep alives sent.  This is typically implemented with HTTP/2
+	// ping messages.
+	KeepAlivesSent int64
+	// The last time a stream was created by this endpoint.  Usually unset for
+	// servers.
+	LastLocalStreamCreatedTimestamp time.Time
+	// The last time a stream was created by the remote endpoint.  Usually unset
+	// for clients.
+	LastRemoteStreamCreatedTimestamp time.Time
+	// The last time a message was sent by this endpoint.
+	LastMessageSentTimestamp time.Time
+	// The last time a message was received by this endpoint.
+	LastMessageReceivedTimestamp time.Time
+	// The amount of window, granted to the local endpoint by the remote endpoint.
+	// This may be slightly out of date due to network latency.  This does NOT
+	// include stream level or TCP level flow control info.
+	LocalFlowControlWindow int64
+	// The amount of window, granted to the remote endpoint by the local endpoint.
+	// This may be slightly out of date due to network latency.  This does NOT
+	// include stream level or TCP level flow control info.
+	RemoteFlowControlWindow int64
+	// The locally bound address.
+	LocalAddr net.Addr
+	// The remote bound address.  May be absent.
+	RemoteAddr net.Addr
+	// Optional, represents the name of the remote endpoint, if different than
+	// the original target name.
+	RemoteName    string
+	SocketOptions *SocketOptionData
+	Security      credentials.ChannelzSecurityValue
+}
+
+// Socket is the interface that should be satisfied in order to be tracked by
+// channelz as Socket.
+type Socket interface {
+	ChannelzMetric() *SocketInternalMetric
+}
+
+type listenSocket struct {
+	refName string
+	s       Socket
+	id      int64
+	pid     int64
+	cm      *channelMap
+}
+
+func (ls *listenSocket) addChild(id int64, e entry) {
+	grpclog.Errorf("cannot add a child (id = %d) of type %T to a listen socket", id, e)
+}
+
+func (ls *listenSocket) deleteChild(id int64) {
+	grpclog.Errorf("cannot delete a child (id = %d) from a listen socket", id)
+}
+
+func (ls *listenSocket) triggerDelete() {
+	ls.cm.deleteEntry(ls.id)
+	ls.cm.findEntry(ls.pid).deleteChild(ls.id)
+}
+
+func (ls *listenSocket) deleteSelfIfReady() {
+	grpclog.Errorf("cannot call deleteSelfIfReady on a listen socket")
+}
+
+func (ls *listenSocket) getParentID() int64 {
+	return ls.pid
+}
+
+type normalSocket struct {
+	refName string
+	s       Socket
+	id      int64
+	pid     int64
+	cm      *channelMap
+}
+
+func (ns *normalSocket) addChild(id int64, e entry) {
+	grpclog.Errorf("cannot add a child (id = %d) of type %T to a normal socket", id, e)
+}
+
+func (ns *normalSocket) deleteChild(id int64) {
+	grpclog.Errorf("cannot delete a child (id = %d) from a normal socket", id)
+}
+
+func (ns *normalSocket) triggerDelete() {
+	ns.cm.deleteEntry(ns.id)
+	ns.cm.findEntry(ns.pid).deleteChild(ns.id)
+}
+
+func (ns *normalSocket) deleteSelfIfReady() {
+	grpclog.Errorf("cannot call deleteSelfIfReady on a normal socket")
+}
+
+func (ns *normalSocket) getParentID() int64 {
+	return ns.pid
+}
+
+// ServerMetric defines the info channelz provides for a specific Server, which
+// includes ServerInternalMetric and channelz-specific data, such as channelz id,
+// child list, etc.
+type ServerMetric struct {
+	// ID is the channelz id of this server.
+	ID int64
+	// RefName is the human readable reference string of this server.
+	RefName string
+	// ServerData contains server internal metric reported by the server through
+	// ChannelzMetric().
+	ServerData *ServerInternalMetric
+	// ListenSockets tracks the listener socket type children of this server in the
+	// format of a map from socket channelz id to corresponding reference string.
+	ListenSockets map[int64]string
+}
+
+// ServerInternalMetric defines the struct that the implementor of Server interface
+// should return from ChannelzMetric().
+type ServerInternalMetric struct {
+	// The number of incoming calls started on the server.
+	CallsStarted int64
+	// The number of incoming calls that have completed with an OK status.
+	CallsSucceeded int64
+	// The number of incoming calls that have a completed with a non-OK status.
+	CallsFailed int64
+	// The last time a call was started on the server.
+	LastCallStartedTimestamp time.Time
+}
+
+// Server is the interface to be satisfied in order to be tracked by channelz as
+// Server.
+type Server interface {
+	ChannelzMetric() *ServerInternalMetric
+}
+
+type server struct {
+	refName       string
+	s             Server
+	closeCalled   bool
+	sockets       map[int64]string
+	listenSockets map[int64]string
+	id            int64
+	cm            *channelMap
+}
+
+func (s *server) addChild(id int64, e entry) {
+	switch v := e.(type) {
+	case *normalSocket:
+		s.sockets[id] = v.refName
+	case *listenSocket:
+		s.listenSockets[id] = v.refName
+	default:
+		grpclog.Errorf("cannot add a child (id = %d) of type %T to a server", id, e)
+	}
+}
+
+func (s *server) deleteChild(id int64) {
+	delete(s.sockets, id)
+	delete(s.listenSockets, id)
+	s.deleteSelfIfReady()
+}
+
+func (s *server) triggerDelete() {
+	s.closeCalled = true
+	s.deleteSelfIfReady()
+}
+
+func (s *server) deleteSelfIfReady() {
+	if !s.closeCalled || len(s.sockets)+len(s.listenSockets) != 0 {
+		return
+	}
+	s.cm.deleteEntry(s.id)
+}
+
+func (s *server) getParentID() int64 {
+	return 0
+}
+
+type tracedChannel interface {
+	getChannelTrace() *channelTrace
+	incrTraceRefCount()
+	decrTraceRefCount()
+	getRefName() string
+}
+
+type channelTrace struct {
+	cm          *channelMap
+	createdTime time.Time
+	eventCount  int64
+	mu          sync.Mutex
+	events      []*TraceEvent
+}
+
+func (c *channelTrace) append(e *TraceEvent) {
+	c.mu.Lock()
+	if len(c.events) == getMaxTraceEntry() {
+		del := c.events[0]
+		c.events = c.events[1:]
+		if del.RefID != 0 {
+			// start recursive cleanup in a goroutine to not block the call originated from grpc.
+			go func() {
+				// need to acquire c.cm.mu lock to call the unlocked attemptCleanup func.
+				c.cm.mu.Lock()
+				c.cm.decrTraceRefCount(del.RefID)
+				c.cm.mu.Unlock()
+			}()
+		}
+	}
+	e.Timestamp = time.Now()
+	c.events = append(c.events, e)
+	c.eventCount++
+	c.mu.Unlock()
+}
+
+func (c *channelTrace) clear() {
+	c.mu.Lock()
+	for _, e := range c.events {
+		if e.RefID != 0 {
+			// caller should have already held the c.cm.mu lock.
+			c.cm.decrTraceRefCount(e.RefID)
+		}
+	}
+	c.mu.Unlock()
+}
+
+// Severity is the severity level of a trace event.
+// The canonical enumeration of all valid values is here:
+// https://github.com/grpc/grpc-proto/blob/9b13d199cc0d4703c7ea26c9c330ba695866eb23/grpc/channelz/v1/channelz.proto#L126.
+type Severity int
+
+const (
+	// CtUNKNOWN indicates unknown severity of a trace event.
+	CtUNKNOWN Severity = iota
+	// CtINFO indicates info level severity of a trace event.
+	CtINFO
+	// CtWarning indicates warning level severity of a trace event.
+	CtWarning
+	// CtError indicates error level severity of a trace event.
+	CtError
+)
+
+// RefChannelType is the type of the entity being referenced in a trace event.
+type RefChannelType int
+
+const (
+	// RefChannel indicates the referenced entity is a Channel.
+	RefChannel RefChannelType = iota
+	// RefSubChannel indicates the referenced entity is a SubChannel.
+	RefSubChannel
+)
+
+func (c *channelTrace) dumpData() *ChannelTrace {
+	c.mu.Lock()
+	ct := &ChannelTrace{EventNum: c.eventCount, CreationTime: c.createdTime}
+	ct.Events = c.events[:len(c.events)]
+	c.mu.Unlock()
+	return ct
+}

vendor/google.golang.org/grpc/internal/channelz/types_linux.go

@@ -0,0 +1,53 @@
+// +build !appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+	"syscall"
+
+	"golang.org/x/sys/unix"
+)
+
+// SocketOptionData defines the struct to hold socket option data, and related
+// getter function to obtain info from fd.
+type SocketOptionData struct {
+	Linger      *unix.Linger
+	RecvTimeout *unix.Timeval
+	SendTimeout *unix.Timeval
+	TCPInfo     *unix.TCPInfo
+}
+
+// Getsockopt defines the function to get socket options requested by channelz.
+// It is to be passed to syscall.RawConn.Control().
+func (s *SocketOptionData) Getsockopt(fd uintptr) {
+	if v, err := unix.GetsockoptLinger(int(fd), syscall.SOL_SOCKET, syscall.SO_LINGER); err == nil {
+		s.Linger = v
+	}
+	if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_RCVTIMEO); err == nil {
+		s.RecvTimeout = v
+	}
+	if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_SNDTIMEO); err == nil {
+		s.SendTimeout = v
+	}
+	if v, err := unix.GetsockoptTCPInfo(int(fd), syscall.SOL_TCP, syscall.TCP_INFO); err == nil {
+		s.TCPInfo = v
+	}
+}

vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go

@@ -0,0 +1,44 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+	"sync"
+
+	"google.golang.org/grpc/grpclog"
+)
+
+var once sync.Once
+
+// SocketOptionData defines the struct to hold socket option data, and related
+// getter function to obtain info from fd.
+// Windows OS doesn't support Socket Option
+type SocketOptionData struct {
+}
+
+// Getsockopt defines the function to get socket options requested by channelz.
+// It is to be passed to syscall.RawConn.Control().
+// Windows OS doesn't support Socket Option
+func (s *SocketOptionData) Getsockopt(fd uintptr) {
+	once.Do(func() {
+		grpclog.Warningln("Channelz: socket options are not supported on non-linux os and appengine.")
+	})
+}

vendor/google.golang.org/grpc/internal/channelz/util_linux.go

@@ -0,0 +1,39 @@
+// +build linux,!appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+import (
+	"syscall"
+)
+
+// GetSocketOption gets the socket option info of the conn.
+func GetSocketOption(socket interface{}) *SocketOptionData {
+	c, ok := socket.(syscall.Conn)
+	if !ok {
+		return nil
+	}
+	data := &SocketOptionData{}
+	if rawConn, err := c.SyscallConn(); err == nil {
+		rawConn.Control(data.Getsockopt)
+		return data
+	}
+	return nil
+}

vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go

@@ -0,0 +1,26 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package channelz
+
+// GetSocketOption gets the socket option info of the conn.
+func GetSocketOption(c interface{}) *SocketOptionData {
+	return nil
+}

vendor/google.golang.org/grpc/internal/envconfig/envconfig.go

@@ -0,0 +1,71 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package envconfig contains grpc settings configured by environment variables.
+package envconfig
+
+import (
+	"os"
+	"strings"
+)
+
+const (
+	prefix              = "GRPC_GO_"
+	retryStr            = prefix + "RETRY"
+	requireHandshakeStr = prefix + "REQUIRE_HANDSHAKE"
+)
+
+// RequireHandshakeSetting describes the settings for handshaking.
+type RequireHandshakeSetting int
+
+const (
+	// RequireHandshakeHybrid (default, deprecated) indicates to not wait for
+	// handshake before considering a connection ready, but wait before
+	// considering successful.
+	RequireHandshakeHybrid RequireHandshakeSetting = iota
+	// RequireHandshakeOn (default after the 1.17 release) indicates to wait
+	// for handshake before considering a connection ready/successful.
+	RequireHandshakeOn
+	// RequireHandshakeOff indicates to not wait for handshake before
+	// considering a connection ready/successful.
+	RequireHandshakeOff
+)
+
+var (
+	// Retry is set if retry is explicitly enabled via "GRPC_GO_RETRY=on".
+	Retry = strings.EqualFold(os.Getenv(retryStr), "on")
+	// RequireHandshake is set based upon the GRPC_GO_REQUIRE_HANDSHAKE
+	// environment variable.
+	//
+	// Will be removed after the 1.18 release.
+	RequireHandshake RequireHandshakeSetting
+)
+
+func init() {
+	switch strings.ToLower(os.Getenv(requireHandshakeStr)) {
+	case "on":
+		fallthrough
+	default:
+		RequireHandshake = RequireHandshakeOn
+	case "off":
+		RequireHandshake = RequireHandshakeOff
+	case "hybrid":
+		// Will be removed after the 1.17 release.
+		RequireHandshake = RequireHandshakeHybrid
+	}
+}

vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go

@@ -0,0 +1,56 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package grpcrand implements math/rand functions in a concurrent-safe way
+// with a global random source, independent of math/rand's global source.
+package grpcrand
+
+import (
+	"math/rand"
+	"sync"
+	"time"
+)
+
+var (
+	r  = rand.New(rand.NewSource(time.Now().UnixNano()))
+	mu sync.Mutex
+)
+
+// Int63n implements rand.Int63n on the grpcrand global source.
+func Int63n(n int64) int64 {
+	mu.Lock()
+	res := r.Int63n(n)
+	mu.Unlock()
+	return res
+}
+
+// Intn implements rand.Intn on the grpcrand global source.
+func Intn(n int) int {
+	mu.Lock()
+	res := r.Intn(n)
+	mu.Unlock()
+	return res
+}
+
+// Float64 implements rand.Float64 on the grpcrand global source.
+func Float64() float64 {
+	mu.Lock()
+	res := r.Float64()
+	mu.Unlock()
+	return res
+}

vendor/google.golang.org/grpc/internal/grpcsync/event.go

@@ -0,0 +1,61 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package grpcsync implements additional synchronization primitives built upon
+// the sync package.
+package grpcsync
+
+import (
+	"sync"
+	"sync/atomic"
+)
+
+// Event represents a one-time event that may occur in the future.
+type Event struct {
+	fired int32
+	c     chan struct{}
+	o     sync.Once
+}
+
+// Fire causes e to complete.  It is safe to call multiple times, and
+// concurrently.  It returns true iff this call to Fire caused the signaling
+// channel returned by Done to close.
+func (e *Event) Fire() bool {
+	ret := false
+	e.o.Do(func() {
+		atomic.StoreInt32(&e.fired, 1)
+		close(e.c)
+		ret = true
+	})
+	return ret
+}
+
+// Done returns a channel that will be closed when Fire is called.
+func (e *Event) Done() <-chan struct{} {
+	return e.c
+}
+
+// HasFired returns true if Fire has been called.
+func (e *Event) HasFired() bool {
+	return atomic.LoadInt32(&e.fired) == 1
+}
+
+// NewEvent returns a new, ready-to-use Event.
+func NewEvent() *Event {
+	return &Event{c: make(chan struct{})}
+}

vendor/google.golang.org/grpc/internal/internal.go

@@ -0,0 +1,54 @@
+/*
+ * Copyright 2016 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package internal contains gRPC-internal code, to avoid polluting
+// the godoc of the top-level grpc package.  It must not import any grpc
+// symbols to avoid circular dependencies.
+package internal
+
+import (
+	"context"
+	"time"
+)
+
+var (
+	// WithResolverBuilder is exported by dialoptions.go
+	WithResolverBuilder interface{} // func (resolver.Builder) grpc.DialOption
+	// WithHealthCheckFunc is not exported by dialoptions.go
+	WithHealthCheckFunc interface{} // func (HealthChecker) DialOption
+	// HealthCheckFunc is used to provide client-side LB channel health checking
+	HealthCheckFunc HealthChecker
+	// BalancerUnregister is exported by package balancer to unregister a balancer.
+	BalancerUnregister func(name string)
+	// KeepaliveMinPingTime is the minimum ping interval.  This must be 10s by
+	// default, but tests may wish to set it lower for convenience.
+	KeepaliveMinPingTime = 10 * time.Second
+)
+
+// HealthChecker defines the signature of the client-side LB channel health checking function.
+type HealthChecker func(ctx context.Context, newStream func() (interface{}, error), reportHealth func(bool), serviceName string) error
+
+const (
+	// CredsBundleModeFallback switches GoogleDefaultCreds to fallback mode.
+	CredsBundleModeFallback = "fallback"
+	// CredsBundleModeBalancer switches GoogleDefaultCreds to grpclb balancer
+	// mode.
+	CredsBundleModeBalancer = "balancer"
+	// CredsBundleModeBackendFromBalancer switches GoogleDefaultCreds to mode
+	// that supports backend returned by grpclb balancer.
+	CredsBundleModeBackendFromBalancer = "backend-from-balancer"
+)

vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go

@@ -0,0 +1,114 @@
+// +build !appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package syscall provides functionalities that grpc uses to get low-level operating system
+// stats/info.
+package syscall
+
+import (
+	"fmt"
+	"net"
+	"syscall"
+	"time"
+
+	"golang.org/x/sys/unix"
+	"google.golang.org/grpc/grpclog"
+)
+
+// GetCPUTime returns the how much CPU time has passed since the start of this process.
+func GetCPUTime() int64 {
+	var ts unix.Timespec
+	if err := unix.ClockGettime(unix.CLOCK_PROCESS_CPUTIME_ID, &ts); err != nil {
+		grpclog.Fatal(err)
+	}
+	return ts.Nano()
+}
+
+// Rusage is an alias for syscall.Rusage under linux non-appengine environment.
+type Rusage syscall.Rusage
+
+// GetRusage returns the resource usage of current process.
+func GetRusage() (rusage *Rusage) {
+	rusage = new(Rusage)
+	syscall.Getrusage(syscall.RUSAGE_SELF, (*syscall.Rusage)(rusage))
+	return
+}
+
+// CPUTimeDiff returns the differences of user CPU time and system CPU time used
+// between two Rusage structs.
+func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) {
+	f := (*syscall.Rusage)(first)
+	l := (*syscall.Rusage)(latest)
+	var (
+		utimeDiffs  = l.Utime.Sec - f.Utime.Sec
+		utimeDiffus = l.Utime.Usec - f.Utime.Usec
+		stimeDiffs  = l.Stime.Sec - f.Stime.Sec
+		stimeDiffus = l.Stime.Usec - f.Stime.Usec
+	)
+
+	uTimeElapsed := float64(utimeDiffs) + float64(utimeDiffus)*1.0e-6
+	sTimeElapsed := float64(stimeDiffs) + float64(stimeDiffus)*1.0e-6
+
+	return uTimeElapsed, sTimeElapsed
+}
+
+// SetTCPUserTimeout sets the TCP user timeout on a connection's socket
+func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error {
+	tcpconn, ok := conn.(*net.TCPConn)
+	if !ok {
+		// not a TCP connection. exit early
+		return nil
+	}
+	rawConn, err := tcpconn.SyscallConn()
+	if err != nil {
+		return fmt.Errorf("error getting raw connection: %v", err)
+	}
+	err = rawConn.Control(func(fd uintptr) {
+		err = syscall.SetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT, int(timeout/time.Millisecond))
+	})
+	if err != nil {
+		return fmt.Errorf("error setting option on socket: %v", err)
+	}
+
+	return nil
+}
+
+// GetTCPUserTimeout gets the TCP user timeout on a connection's socket
+func GetTCPUserTimeout(conn net.Conn) (opt int, err error) {
+	tcpconn, ok := conn.(*net.TCPConn)
+	if !ok {
+		err = fmt.Errorf("conn is not *net.TCPConn. got %T", conn)
+		return
+	}
+	rawConn, err := tcpconn.SyscallConn()
+	if err != nil {
+		err = fmt.Errorf("error getting raw connection: %v", err)
+		return
+	}
+	err = rawConn.Control(func(fd uintptr) {
+		opt, err = syscall.GetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT)
+	})
+	if err != nil {
+		err = fmt.Errorf("error getting option on socket: %v", err)
+		return
+	}
+
+	return
+}

vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go

@@ -0,0 +1,63 @@
+// +build !linux appengine
+
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package syscall
+
+import (
+	"net"
+	"time"
+
+	"google.golang.org/grpc/grpclog"
+)
+
+func init() {
+	grpclog.Info("CPU time info is unavailable on non-linux or appengine environment.")
+}
+
+// GetCPUTime returns the how much CPU time has passed since the start of this process.
+// It always returns 0 under non-linux or appengine environment.
+func GetCPUTime() int64 {
+	return 0
+}
+
+// Rusage is an empty struct under non-linux or appengine environment.
+type Rusage struct{}
+
+// GetRusage is a no-op function under non-linux or appengine environment.
+func GetRusage() (rusage *Rusage) {
+	return nil
+}
+
+// CPUTimeDiff returns the differences of user CPU time and system CPU time used
+// between two Rusage structs. It a no-op function for non-linux or appengine environment.
+func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) {
+	return 0, 0
+}
+
+// SetTCPUserTimeout is a no-op function under non-linux or appengine environments
+func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error {
+	return nil
+}
+
+// GetTCPUserTimeout is a no-op function under non-linux or appengine environments
+// a negative return value indicates the operation is not supported
+func GetTCPUserTimeout(conn net.Conn) (int, error) {
+	return -1, nil
+}

vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go

@@ -0,0 +1,141 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"sync"
+	"time"
+)
+
+const (
+	// bdpLimit is the maximum value the flow control windows will be increased
+	// to.  TCP typically limits this to 4MB, but some systems go up to 16MB.
+	// Since this is only a limit, it is safe to make it optimistic.
+	bdpLimit = (1 << 20) * 16
+	// alpha is a constant factor used to keep a moving average
+	// of RTTs.
+	alpha = 0.9
+	// If the current bdp sample is greater than or equal to
+	// our beta * our estimated bdp and the current bandwidth
+	// sample is the maximum bandwidth observed so far, we
+	// increase our bbp estimate by a factor of gamma.
+	beta = 0.66
+	// To put our bdp to be smaller than or equal to twice the real BDP,
+	// we should multiply our current sample with 4/3, however to round things out
+	// we use 2 as the multiplication factor.
+	gamma = 2
+)
+
+// Adding arbitrary data to ping so that its ack can be identified.
+// Easter-egg: what does the ping message say?
+var bdpPing = &ping{data: [8]byte{2, 4, 16, 16, 9, 14, 7, 7}}
+
+type bdpEstimator struct {
+	// sentAt is the time when the ping was sent.
+	sentAt time.Time
+
+	mu sync.Mutex
+	// bdp is the current bdp estimate.
+	bdp uint32
+	// sample is the number of bytes received in one measurement cycle.
+	sample uint32
+	// bwMax is the maximum bandwidth noted so far (bytes/sec).
+	bwMax float64
+	// bool to keep track of the beginning of a new measurement cycle.
+	isSent bool
+	// Callback to update the window sizes.
+	updateFlowControl func(n uint32)
+	// sampleCount is the number of samples taken so far.
+	sampleCount uint64
+	// round trip time (seconds)
+	rtt float64
+}
+
+// timesnap registers the time bdp ping was sent out so that
+// network rtt can be calculated when its ack is received.
+// It is called (by controller) when the bdpPing is
+// being written on the wire.
+func (b *bdpEstimator) timesnap(d [8]byte) {
+	if bdpPing.data != d {
+		return
+	}
+	b.sentAt = time.Now()
+}
+
+// add adds bytes to the current sample for calculating bdp.
+// It returns true only if a ping must be sent. This can be used
+// by the caller (handleData) to make decision about batching
+// a window update with it.
+func (b *bdpEstimator) add(n uint32) bool {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	if b.bdp == bdpLimit {
+		return false
+	}
+	if !b.isSent {
+		b.isSent = true
+		b.sample = n
+		b.sentAt = time.Time{}
+		b.sampleCount++
+		return true
+	}
+	b.sample += n
+	return false
+}
+
+// calculate is called when an ack for a bdp ping is received.
+// Here we calculate the current bdp and bandwidth sample and
+// decide if the flow control windows should go up.
+func (b *bdpEstimator) calculate(d [8]byte) {
+	// Check if the ping acked for was the bdp ping.
+	if bdpPing.data != d {
+		return
+	}
+	b.mu.Lock()
+	rttSample := time.Since(b.sentAt).Seconds()
+	if b.sampleCount < 10 {
+		// Bootstrap rtt with an average of first 10 rtt samples.
+		b.rtt += (rttSample - b.rtt) / float64(b.sampleCount)
+	} else {
+		// Heed to the recent past more.
+		b.rtt += (rttSample - b.rtt) * float64(alpha)
+	}
+	b.isSent = false
+	// The number of bytes accumulated so far in the sample is smaller
+	// than or equal to 1.5 times the real BDP on a saturated connection.
+	bwCurrent := float64(b.sample) / (b.rtt * float64(1.5))
+	if bwCurrent > b.bwMax {
+		b.bwMax = bwCurrent
+	}
+	// If the current sample (which is smaller than or equal to the 1.5 times the real BDP) is
+	// greater than or equal to 2/3rd our perceived bdp AND this is the maximum bandwidth seen so far, we
+	// should update our perception of the network BDP.
+	if float64(b.sample) >= beta*float64(b.bdp) && bwCurrent == b.bwMax && b.bdp != bdpLimit {
+		sampleFloat := float64(b.sample)
+		b.bdp = uint32(gamma * sampleFloat)
+		if b.bdp > bdpLimit {
+			b.bdp = bdpLimit
+		}
+		bdp := b.bdp
+		b.mu.Unlock()
+		b.updateFlowControl(bdp)
+		return
+	}
+	b.mu.Unlock()
+}

vendor/google.golang.org/grpc/internal/transport/controlbuf.go

@@ -0,0 +1,852 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"bytes"
+	"fmt"
+	"runtime"
+	"sync"
+
+	"golang.org/x/net/http2"
+	"golang.org/x/net/http2/hpack"
+)
+
+var updateHeaderTblSize = func(e *hpack.Encoder, v uint32) {
+	e.SetMaxDynamicTableSizeLimit(v)
+}
+
+type itemNode struct {
+	it   interface{}
+	next *itemNode
+}
+
+type itemList struct {
+	head *itemNode
+	tail *itemNode
+}
+
+func (il *itemList) enqueue(i interface{}) {
+	n := &itemNode{it: i}
+	if il.tail == nil {
+		il.head, il.tail = n, n
+		return
+	}
+	il.tail.next = n
+	il.tail = n
+}
+
+// peek returns the first item in the list without removing it from the
+// list.
+func (il *itemList) peek() interface{} {
+	return il.head.it
+}
+
+func (il *itemList) dequeue() interface{} {
+	if il.head == nil {
+		return nil
+	}
+	i := il.head.it
+	il.head = il.head.next
+	if il.head == nil {
+		il.tail = nil
+	}
+	return i
+}
+
+func (il *itemList) dequeueAll() *itemNode {
+	h := il.head
+	il.head, il.tail = nil, nil
+	return h
+}
+
+func (il *itemList) isEmpty() bool {
+	return il.head == nil
+}
+
+// The following defines various control items which could flow through
+// the control buffer of transport. They represent different aspects of
+// control tasks, e.g., flow control, settings, streaming resetting, etc.
+
+// registerStream is used to register an incoming stream with loopy writer.
+type registerStream struct {
+	streamID uint32
+	wq       *writeQuota
+}
+
+// headerFrame is also used to register stream on the client-side.
+type headerFrame struct {
+	streamID   uint32
+	hf         []hpack.HeaderField
+	endStream  bool                       // Valid on server side.
+	initStream func(uint32) (bool, error) // Used only on the client side.
+	onWrite    func()
+	wq         *writeQuota    // write quota for the stream created.
+	cleanup    *cleanupStream // Valid on the server side.
+	onOrphaned func(error)    // Valid on client-side
+}
+
+type cleanupStream struct {
+	streamID uint32
+	rst      bool
+	rstCode  http2.ErrCode
+	onWrite  func()
+}
+
+type dataFrame struct {
+	streamID  uint32
+	endStream bool
+	h         []byte
+	d         []byte
+	// onEachWrite is called every time
+	// a part of d is written out.
+	onEachWrite func()
+}
+
+type incomingWindowUpdate struct {
+	streamID  uint32
+	increment uint32
+}
+
+type outgoingWindowUpdate struct {
+	streamID  uint32
+	increment uint32
+}
+
+type incomingSettings struct {
+	ss []http2.Setting
+}
+
+type outgoingSettings struct {
+	ss []http2.Setting
+}
+
+type incomingGoAway struct {
+}
+
+type goAway struct {
+	code      http2.ErrCode
+	debugData []byte
+	headsUp   bool
+	closeConn bool
+}
+
+type ping struct {
+	ack  bool
+	data [8]byte
+}
+
+type outFlowControlSizeRequest struct {
+	resp chan uint32
+}
+
+type outStreamState int
+
+const (
+	active outStreamState = iota
+	empty
+	waitingOnStreamQuota
+)
+
+type outStream struct {
+	id               uint32
+	state            outStreamState
+	itl              *itemList
+	bytesOutStanding int
+	wq               *writeQuota
+
+	next *outStream
+	prev *outStream
+}
+
+func (s *outStream) deleteSelf() {
+	if s.prev != nil {
+		s.prev.next = s.next
+	}
+	if s.next != nil {
+		s.next.prev = s.prev
+	}
+	s.next, s.prev = nil, nil
+}
+
+type outStreamList struct {
+	// Following are sentinel objects that mark the
+	// beginning and end of the list. They do not
+	// contain any item lists. All valid objects are
+	// inserted in between them.
+	// This is needed so that an outStream object can
+	// deleteSelf() in O(1) time without knowing which
+	// list it belongs to.
+	head *outStream
+	tail *outStream
+}
+
+func newOutStreamList() *outStreamList {
+	head, tail := new(outStream), new(outStream)
+	head.next = tail
+	tail.prev = head
+	return &outStreamList{
+		head: head,
+		tail: tail,
+	}
+}
+
+func (l *outStreamList) enqueue(s *outStream) {
+	e := l.tail.prev
+	e.next = s
+	s.prev = e
+	s.next = l.tail
+	l.tail.prev = s
+}
+
+// remove from the beginning of the list.
+func (l *outStreamList) dequeue() *outStream {
+	b := l.head.next
+	if b == l.tail {
+		return nil
+	}
+	b.deleteSelf()
+	return b
+}
+
+// controlBuffer is a way to pass information to loopy.
+// Information is passed as specific struct types called control frames.
+// A control frame not only represents data, messages or headers to be sent out
+// but can also be used to instruct loopy to update its internal state.
+// It shouldn't be confused with an HTTP2 frame, although some of the control frames
+// like dataFrame and headerFrame do go out on wire as HTTP2 frames.
+type controlBuffer struct {
+	ch              chan struct{}
+	done            <-chan struct{}
+	mu              sync.Mutex
+	consumerWaiting bool
+	list            *itemList
+	err             error
+}
+
+func newControlBuffer(done <-chan struct{}) *controlBuffer {
+	return &controlBuffer{
+		ch:   make(chan struct{}, 1),
+		list: &itemList{},
+		done: done,
+	}
+}
+
+func (c *controlBuffer) put(it interface{}) error {
+	_, err := c.executeAndPut(nil, it)
+	return err
+}
+
+func (c *controlBuffer) executeAndPut(f func(it interface{}) bool, it interface{}) (bool, error) {
+	var wakeUp bool
+	c.mu.Lock()
+	if c.err != nil {
+		c.mu.Unlock()
+		return false, c.err
+	}
+	if f != nil {
+		if !f(it) { // f wasn't successful
+			c.mu.Unlock()
+			return false, nil
+		}
+	}
+	if c.consumerWaiting {
+		wakeUp = true
+		c.consumerWaiting = false
+	}
+	c.list.enqueue(it)
+	c.mu.Unlock()
+	if wakeUp {
+		select {
+		case c.ch <- struct{}{}:
+		default:
+		}
+	}
+	return true, nil
+}
+
+// Note argument f should never be nil.
+func (c *controlBuffer) execute(f func(it interface{}) bool, it interface{}) (bool, error) {
+	c.mu.Lock()
+	if c.err != nil {
+		c.mu.Unlock()
+		return false, c.err
+	}
+	if !f(it) { // f wasn't successful
+		c.mu.Unlock()
+		return false, nil
+	}
+	c.mu.Unlock()
+	return true, nil
+}
+
+func (c *controlBuffer) get(block bool) (interface{}, error) {
+	for {
+		c.mu.Lock()
+		if c.err != nil {
+			c.mu.Unlock()
+			return nil, c.err
+		}
+		if !c.list.isEmpty() {
+			h := c.list.dequeue()
+			c.mu.Unlock()
+			return h, nil
+		}
+		if !block {
+			c.mu.Unlock()
+			return nil, nil
+		}
+		c.consumerWaiting = true
+		c.mu.Unlock()
+		select {
+		case <-c.ch:
+		case <-c.done:
+			c.finish()
+			return nil, ErrConnClosing
+		}
+	}
+}
+
+func (c *controlBuffer) finish() {
+	c.mu.Lock()
+	if c.err != nil {
+		c.mu.Unlock()
+		return
+	}
+	c.err = ErrConnClosing
+	// There may be headers for streams in the control buffer.
+	// These streams need to be cleaned out since the transport
+	// is still not aware of these yet.
+	for head := c.list.dequeueAll(); head != nil; head = head.next {
+		hdr, ok := head.it.(*headerFrame)
+		if !ok {
+			continue
+		}
+		if hdr.onOrphaned != nil { // It will be nil on the server-side.
+			hdr.onOrphaned(ErrConnClosing)
+		}
+	}
+	c.mu.Unlock()
+}
+
+type side int
+
+const (
+	clientSide side = iota
+	serverSide
+)
+
+// Loopy receives frames from the control buffer.
+// Each frame is handled individually; most of the work done by loopy goes
+// into handling data frames. Loopy maintains a queue of active streams, and each
+// stream maintains a queue of data frames; as loopy receives data frames
+// it gets added to the queue of the relevant stream.
+// Loopy goes over this list of active streams by processing one node every iteration,
+// thereby closely resemebling to a round-robin scheduling over all streams. While
+// processing a stream, loopy writes out data bytes from this stream capped by the min
+// of http2MaxFrameLen, connection-level flow control and stream-level flow control.
+type loopyWriter struct {
+	side      side
+	cbuf      *controlBuffer
+	sendQuota uint32
+	oiws      uint32 // outbound initial window size.
+	// estdStreams is map of all established streams that are not cleaned-up yet.
+	// On client-side, this is all streams whose headers were sent out.
+	// On server-side, this is all streams whose headers were received.
+	estdStreams map[uint32]*outStream // Established streams.
+	// activeStreams is a linked-list of all streams that have data to send and some
+	// stream-level flow control quota.
+	// Each of these streams internally have a list of data items(and perhaps trailers
+	// on the server-side) to be sent out.
+	activeStreams *outStreamList
+	framer        *framer
+	hBuf          *bytes.Buffer  // The buffer for HPACK encoding.
+	hEnc          *hpack.Encoder // HPACK encoder.
+	bdpEst        *bdpEstimator
+	draining      bool
+
+	// Side-specific handlers
+	ssGoAwayHandler func(*goAway) (bool, error)
+}
+
+func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimator) *loopyWriter {
+	var buf bytes.Buffer
+	l := &loopyWriter{
+		side:          s,
+		cbuf:          cbuf,
+		sendQuota:     defaultWindowSize,
+		oiws:          defaultWindowSize,
+		estdStreams:   make(map[uint32]*outStream),
+		activeStreams: newOutStreamList(),
+		framer:        fr,
+		hBuf:          &buf,
+		hEnc:          hpack.NewEncoder(&buf),
+		bdpEst:        bdpEst,
+	}
+	return l
+}
+
+const minBatchSize = 1000
+
+// run should be run in a separate goroutine.
+// It reads control frames from controlBuf and processes them by:
+// 1. Updating loopy's internal state, or/and
+// 2. Writing out HTTP2 frames on the wire.
+//
+// Loopy keeps all active streams with data to send in a linked-list.
+// All streams in the activeStreams linked-list must have both:
+// 1. Data to send, and
+// 2. Stream level flow control quota available.
+//
+// In each iteration of run loop, other than processing the incoming control
+// frame, loopy calls processData, which processes one node from the activeStreams linked-list.
+// This results in writing of HTTP2 frames into an underlying write buffer.
+// When there's no more control frames to read from controlBuf, loopy flushes the write buffer.
+// As an optimization, to increase the batch size for each flush, loopy yields the processor, once
+// if the batch size is too low to give stream goroutines a chance to fill it up.
+func (l *loopyWriter) run() (err error) {
+	defer func() {
+		if err == ErrConnClosing {
+			// Don't log ErrConnClosing as error since it happens
+			// 1. When the connection is closed by some other known issue.
+			// 2. User closed the connection.
+			// 3. A graceful close of connection.
+			infof("transport: loopyWriter.run returning. %v", err)
+			err = nil
+		}
+	}()
+	for {
+		it, err := l.cbuf.get(true)
+		if err != nil {
+			return err
+		}
+		if err = l.handle(it); err != nil {
+			return err
+		}
+		if _, err = l.processData(); err != nil {
+			return err
+		}
+		gosched := true
+	hasdata:
+		for {
+			it, err := l.cbuf.get(false)
+			if err != nil {
+				return err
+			}
+			if it != nil {
+				if err = l.handle(it); err != nil {
+					return err
+				}
+				if _, err = l.processData(); err != nil {
+					return err
+				}
+				continue hasdata
+			}
+			isEmpty, err := l.processData()
+			if err != nil {
+				return err
+			}
+			if !isEmpty {
+				continue hasdata
+			}
+			if gosched {
+				gosched = false
+				if l.framer.writer.offset < minBatchSize {
+					runtime.Gosched()
+					continue hasdata
+				}
+			}
+			l.framer.writer.Flush()
+			break hasdata
+
+		}
+	}
+}
+
+func (l *loopyWriter) outgoingWindowUpdateHandler(w *outgoingWindowUpdate) error {
+	return l.framer.fr.WriteWindowUpdate(w.streamID, w.increment)
+}
+
+func (l *loopyWriter) incomingWindowUpdateHandler(w *incomingWindowUpdate) error {
+	// Otherwise update the quota.
+	if w.streamID == 0 {
+		l.sendQuota += w.increment
+		return nil
+	}
+	// Find the stream and update it.
+	if str, ok := l.estdStreams[w.streamID]; ok {
+		str.bytesOutStanding -= int(w.increment)
+		if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota > 0 && str.state == waitingOnStreamQuota {
+			str.state = active
+			l.activeStreams.enqueue(str)
+			return nil
+		}
+	}
+	return nil
+}
+
+func (l *loopyWriter) outgoingSettingsHandler(s *outgoingSettings) error {
+	return l.framer.fr.WriteSettings(s.ss...)
+}
+
+func (l *loopyWriter) incomingSettingsHandler(s *incomingSettings) error {
+	if err := l.applySettings(s.ss); err != nil {
+		return err
+	}
+	return l.framer.fr.WriteSettingsAck()
+}
+
+func (l *loopyWriter) registerStreamHandler(h *registerStream) error {
+	str := &outStream{
+		id:    h.streamID,
+		state: empty,
+		itl:   &itemList{},
+		wq:    h.wq,
+	}
+	l.estdStreams[h.streamID] = str
+	return nil
+}
+
+func (l *loopyWriter) headerHandler(h *headerFrame) error {
+	if l.side == serverSide {
+		str, ok := l.estdStreams[h.streamID]
+		if !ok {
+			warningf("transport: loopy doesn't recognize the stream: %d", h.streamID)
+			return nil
+		}
+		// Case 1.A: Server is responding back with headers.
+		if !h.endStream {
+			return l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite)
+		}
+		// else:  Case 1.B: Server wants to close stream.
+
+		if str.state != empty { // either active or waiting on stream quota.
+			// add it str's list of items.
+			str.itl.enqueue(h)
+			return nil
+		}
+		if err := l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite); err != nil {
+			return err
+		}
+		return l.cleanupStreamHandler(h.cleanup)
+	}
+	// Case 2: Client wants to originate stream.
+	str := &outStream{
+		id:    h.streamID,
+		state: empty,
+		itl:   &itemList{},
+		wq:    h.wq,
+	}
+	str.itl.enqueue(h)
+	return l.originateStream(str)
+}
+
+func (l *loopyWriter) originateStream(str *outStream) error {
+	hdr := str.itl.dequeue().(*headerFrame)
+	sendPing, err := hdr.initStream(str.id)
+	if err != nil {
+		if err == ErrConnClosing {
+			return err
+		}
+		// Other errors(errStreamDrain) need not close transport.
+		return nil
+	}
+	if err = l.writeHeader(str.id, hdr.endStream, hdr.hf, hdr.onWrite); err != nil {
+		return err
+	}
+	l.estdStreams[str.id] = str
+	if sendPing {
+		return l.pingHandler(&ping{data: [8]byte{}})
+	}
+	return nil
+}
+
+func (l *loopyWriter) writeHeader(streamID uint32, endStream bool, hf []hpack.HeaderField, onWrite func()) error {
+	if onWrite != nil {
+		onWrite()
+	}
+	l.hBuf.Reset()
+	for _, f := range hf {
+		if err := l.hEnc.WriteField(f); err != nil {
+			warningf("transport: loopyWriter.writeHeader encountered error while encoding headers:", err)
+		}
+	}
+	var (
+		err               error
+		endHeaders, first bool
+	)
+	first = true
+	for !endHeaders {
+		size := l.hBuf.Len()
+		if size > http2MaxFrameLen {
+			size = http2MaxFrameLen
+		} else {
+			endHeaders = true
+		}
+		if first {
+			first = false
+			err = l.framer.fr.WriteHeaders(http2.HeadersFrameParam{
+				StreamID:      streamID,
+				BlockFragment: l.hBuf.Next(size),
+				EndStream:     endStream,
+				EndHeaders:    endHeaders,
+			})
+		} else {
+			err = l.framer.fr.WriteContinuation(
+				streamID,
+				endHeaders,
+				l.hBuf.Next(size),
+			)
+		}
+		if err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func (l *loopyWriter) preprocessData(df *dataFrame) error {
+	str, ok := l.estdStreams[df.streamID]
+	if !ok {
+		return nil
+	}
+	// If we got data for a stream it means that
+	// stream was originated and the headers were sent out.
+	str.itl.enqueue(df)
+	if str.state == empty {
+		str.state = active
+		l.activeStreams.enqueue(str)
+	}
+	return nil
+}
+
+func (l *loopyWriter) pingHandler(p *ping) error {
+	if !p.ack {
+		l.bdpEst.timesnap(p.data)
+	}
+	return l.framer.fr.WritePing(p.ack, p.data)
+
+}
+
+func (l *loopyWriter) outFlowControlSizeRequestHandler(o *outFlowControlSizeRequest) error {
+	o.resp <- l.sendQuota
+	return nil
+}
+
+func (l *loopyWriter) cleanupStreamHandler(c *cleanupStream) error {
+	c.onWrite()
+	if str, ok := l.estdStreams[c.streamID]; ok {
+		// On the server side it could be a trailers-only response or
+		// a RST_STREAM before stream initialization thus the stream might
+		// not be established yet.
+		delete(l.estdStreams, c.streamID)
+		str.deleteSelf()
+	}
+	if c.rst { // If RST_STREAM needs to be sent.
+		if err := l.framer.fr.WriteRSTStream(c.streamID, c.rstCode); err != nil {
+			return err
+		}
+	}
+	if l.side == clientSide && l.draining && len(l.estdStreams) == 0 {
+		return ErrConnClosing
+	}
+	return nil
+}
+
+func (l *loopyWriter) incomingGoAwayHandler(*incomingGoAway) error {
+	if l.side == clientSide {
+		l.draining = true
+		if len(l.estdStreams) == 0 {
+			return ErrConnClosing
+		}
+	}
+	return nil
+}
+
+func (l *loopyWriter) goAwayHandler(g *goAway) error {
+	// Handling of outgoing GoAway is very specific to side.
+	if l.ssGoAwayHandler != nil {
+		draining, err := l.ssGoAwayHandler(g)
+		if err != nil {
+			return err
+		}
+		l.draining = draining
+	}
+	return nil
+}
+
+func (l *loopyWriter) handle(i interface{}) error {
+	switch i := i.(type) {
+	case *incomingWindowUpdate:
+		return l.incomingWindowUpdateHandler(i)
+	case *outgoingWindowUpdate:
+		return l.outgoingWindowUpdateHandler(i)
+	case *incomingSettings:
+		return l.incomingSettingsHandler(i)
+	case *outgoingSettings:
+		return l.outgoingSettingsHandler(i)
+	case *headerFrame:
+		return l.headerHandler(i)
+	case *registerStream:
+		return l.registerStreamHandler(i)
+	case *cleanupStream:
+		return l.cleanupStreamHandler(i)
+	case *incomingGoAway:
+		return l.incomingGoAwayHandler(i)
+	case *dataFrame:
+		return l.preprocessData(i)
+	case *ping:
+		return l.pingHandler(i)
+	case *goAway:
+		return l.goAwayHandler(i)
+	case *outFlowControlSizeRequest:
+		return l.outFlowControlSizeRequestHandler(i)
+	default:
+		return fmt.Errorf("transport: unknown control message type %T", i)
+	}
+}
+
+func (l *loopyWriter) applySettings(ss []http2.Setting) error {
+	for _, s := range ss {
+		switch s.ID {
+		case http2.SettingInitialWindowSize:
+			o := l.oiws
+			l.oiws = s.Val
+			if o < l.oiws {
+				// If the new limit is greater make all depleted streams active.
+				for _, stream := range l.estdStreams {
+					if stream.state == waitingOnStreamQuota {
+						stream.state = active
+						l.activeStreams.enqueue(stream)
+					}
+				}
+			}
+		case http2.SettingHeaderTableSize:
+			updateHeaderTblSize(l.hEnc, s.Val)
+		}
+	}
+	return nil
+}
+
+// processData removes the first stream from active streams, writes out at most 16KB
+// of its data and then puts it at the end of activeStreams if there's still more data
+// to be sent and stream has some stream-level flow control.
+func (l *loopyWriter) processData() (bool, error) {
+	if l.sendQuota == 0 {
+		return true, nil
+	}
+	str := l.activeStreams.dequeue() // Remove the first stream.
+	if str == nil {
+		return true, nil
+	}
+	dataItem := str.itl.peek().(*dataFrame) // Peek at the first data item this stream.
+	// A data item is represented by a dataFrame, since it later translates into
+	// multiple HTTP2 data frames.
+	// Every dataFrame has two buffers; h that keeps grpc-message header and d that is acutal data.
+	// As an optimization to keep wire traffic low, data from d is copied to h to make as big as the
+	// maximum possilbe HTTP2 frame size.
+
+	if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // Empty data frame
+		// Client sends out empty data frame with endStream = true
+		if err := l.framer.fr.WriteData(dataItem.streamID, dataItem.endStream, nil); err != nil {
+			return false, err
+		}
+		str.itl.dequeue() // remove the empty data item from stream
+		if str.itl.isEmpty() {
+			str.state = empty
+		} else if trailer, ok := str.itl.peek().(*headerFrame); ok { // the next item is trailers.
+			if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil {
+				return false, err
+			}
+			if err := l.cleanupStreamHandler(trailer.cleanup); err != nil {
+				return false, nil
+			}
+		} else {
+			l.activeStreams.enqueue(str)
+		}
+		return false, nil
+	}
+	var (
+		idx int
+		buf []byte
+	)
+	if len(dataItem.h) != 0 { // data header has not been written out yet.
+		buf = dataItem.h
+	} else {
+		idx = 1
+		buf = dataItem.d
+	}
+	size := http2MaxFrameLen
+	if len(buf) < size {
+		size = len(buf)
+	}
+	if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota <= 0 { // stream-level flow control.
+		str.state = waitingOnStreamQuota
+		return false, nil
+	} else if strQuota < size {
+		size = strQuota
+	}
+
+	if l.sendQuota < uint32(size) { // connection-level flow control.
+		size = int(l.sendQuota)
+	}
+	// Now that outgoing flow controls are checked we can replenish str's write quota
+	str.wq.replenish(size)
+	var endStream bool
+	// If this is the last data message on this stream and all of it can be written in this iteration.
+	if dataItem.endStream && size == len(buf) {
+		// buf contains either data or it contains header but data is empty.
+		if idx == 1 || len(dataItem.d) == 0 {
+			endStream = true
+		}
+	}
+	if dataItem.onEachWrite != nil {
+		dataItem.onEachWrite()
+	}
+	if err := l.framer.fr.WriteData(dataItem.streamID, endStream, buf[:size]); err != nil {
+		return false, err
+	}
+	buf = buf[size:]
+	str.bytesOutStanding += size
+	l.sendQuota -= uint32(size)
+	if idx == 0 {
+		dataItem.h = buf
+	} else {
+		dataItem.d = buf
+	}
+
+	if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // All the data from that message was written out.
+		str.itl.dequeue()
+	}
+	if str.itl.isEmpty() {
+		str.state = empty
+	} else if trailer, ok := str.itl.peek().(*headerFrame); ok { // The next item is trailers.
+		if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil {
+			return false, err
+		}
+		if err := l.cleanupStreamHandler(trailer.cleanup); err != nil {
+			return false, err
+		}
+	} else if int(l.oiws)-str.bytesOutStanding <= 0 { // Ran out of stream quota.
+		str.state = waitingOnStreamQuota
+	} else { // Otherwise add it back to the list of active streams.
+		l.activeStreams.enqueue(str)
+	}
+	return false, nil
+}

vendor/google.golang.org/grpc/internal/transport/defaults.go

@@ -0,0 +1,49 @@
+/*
+ *
+ * Copyright 2018 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"math"
+	"time"
+)
+
+const (
+	// The default value of flow control window size in HTTP2 spec.
+	defaultWindowSize = 65535
+	// The initial window size for flow control.
+	initialWindowSize             = defaultWindowSize // for an RPC
+	infinity                      = time.Duration(math.MaxInt64)
+	defaultClientKeepaliveTime    = infinity
+	defaultClientKeepaliveTimeout = 20 * time.Second
+	defaultMaxStreamsClient       = 100
+	defaultMaxConnectionIdle      = infinity
+	defaultMaxConnectionAge       = infinity
+	defaultMaxConnectionAgeGrace  = infinity
+	defaultServerKeepaliveTime    = 2 * time.Hour
+	defaultServerKeepaliveTimeout = 20 * time.Second
+	defaultKeepalivePolicyMinTime = 5 * time.Minute
+	// max window limit set by HTTP2 Specs.
+	maxWindowSize = math.MaxInt32
+	// defaultWriteQuota is the default value for number of data
+	// bytes that each stream can schedule before some of it being
+	// flushed out.
+	defaultWriteQuota              = 64 * 1024
+	defaultClientMaxHeaderListSize = uint32(16 << 20)
+	defaultServerMaxHeaderListSize = uint32(16 << 20)
+)

vendor/google.golang.org/grpc/internal/transport/flowcontrol.go

@@ -0,0 +1,218 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"fmt"
+	"math"
+	"sync"
+	"sync/atomic"
+)
+
+// writeQuota is a soft limit on the amount of data a stream can
+// schedule before some of it is written out.
+type writeQuota struct {
+	quota int32
+	// get waits on read from when quota goes less than or equal to zero.
+	// replenish writes on it when quota goes positive again.
+	ch chan struct{}
+	// done is triggered in error case.
+	done <-chan struct{}
+	// replenish is called by loopyWriter to give quota back to.
+	// It is implemented as a field so that it can be updated
+	// by tests.
+	replenish func(n int)
+}
+
+func newWriteQuota(sz int32, done <-chan struct{}) *writeQuota {
+	w := &writeQuota{
+		quota: sz,
+		ch:    make(chan struct{}, 1),
+		done:  done,
+	}
+	w.replenish = w.realReplenish
+	return w
+}
+
+func (w *writeQuota) get(sz int32) error {
+	for {
+		if atomic.LoadInt32(&w.quota) > 0 {
+			atomic.AddInt32(&w.quota, -sz)
+			return nil
+		}
+		select {
+		case <-w.ch:
+			continue
+		case <-w.done:
+			return errStreamDone
+		}
+	}
+}
+
+func (w *writeQuota) realReplenish(n int) {
+	sz := int32(n)
+	a := atomic.AddInt32(&w.quota, sz)
+	b := a - sz
+	if b <= 0 && a > 0 {
+		select {
+		case w.ch <- struct{}{}:
+		default:
+		}
+	}
+}
+
+type trInFlow struct {
+	limit               uint32
+	unacked             uint32
+	effectiveWindowSize uint32
+}
+
+func (f *trInFlow) newLimit(n uint32) uint32 {
+	d := n - f.limit
+	f.limit = n
+	f.updateEffectiveWindowSize()
+	return d
+}
+
+func (f *trInFlow) onData(n uint32) uint32 {
+	f.unacked += n
+	if f.unacked >= f.limit/4 {
+		w := f.unacked
+		f.unacked = 0
+		f.updateEffectiveWindowSize()
+		return w
+	}
+	f.updateEffectiveWindowSize()
+	return 0
+}
+
+func (f *trInFlow) reset() uint32 {
+	w := f.unacked
+	f.unacked = 0
+	f.updateEffectiveWindowSize()
+	return w
+}
+
+func (f *trInFlow) updateEffectiveWindowSize() {
+	atomic.StoreUint32(&f.effectiveWindowSize, f.limit-f.unacked)
+}
+
+func (f *trInFlow) getSize() uint32 {
+	return atomic.LoadUint32(&f.effectiveWindowSize)
+}
+
+// TODO(mmukhi): Simplify this code.
+// inFlow deals with inbound flow control
+type inFlow struct {
+	mu sync.Mutex
+	// The inbound flow control limit for pending data.
+	limit uint32
+	// pendingData is the overall data which have been received but not been
+	// consumed by applications.
+	pendingData uint32
+	// The amount of data the application has consumed but grpc has not sent
+	// window update for them. Used to reduce window update frequency.
+	pendingUpdate uint32
+	// delta is the extra window update given by receiver when an application
+	// is reading data bigger in size than the inFlow limit.
+	delta uint32
+}
+
+// newLimit updates the inflow window to a new value n.
+// It assumes that n is always greater than the old limit.
+func (f *inFlow) newLimit(n uint32) uint32 {
+	f.mu.Lock()
+	d := n - f.limit
+	f.limit = n
+	f.mu.Unlock()
+	return d
+}
+
+func (f *inFlow) maybeAdjust(n uint32) uint32 {
+	if n > uint32(math.MaxInt32) {
+		n = uint32(math.MaxInt32)
+	}
+	f.mu.Lock()
+	// estSenderQuota is the receiver's view of the maximum number of bytes the sender
+	// can send without a window update.
+	estSenderQuota := int32(f.limit - (f.pendingData + f.pendingUpdate))
+	// estUntransmittedData is the maximum number of bytes the sends might not have put
+	// on the wire yet. A value of 0 or less means that we have already received all or
+	// more bytes than the application is requesting to read.
+	estUntransmittedData := int32(n - f.pendingData) // Casting into int32 since it could be negative.
+	// This implies that unless we send a window update, the sender won't be able to send all the bytes
+	// for this message. Therefore we must send an update over the limit since there's an active read
+	// request from the application.
+	if estUntransmittedData > estSenderQuota {
+		// Sender's window shouldn't go more than 2^31 - 1 as specified in the HTTP spec.
+		if f.limit+n > maxWindowSize {
+			f.delta = maxWindowSize - f.limit
+		} else {
+			// Send a window update for the whole message and not just the difference between
+			// estUntransmittedData and estSenderQuota. This will be helpful in case the message
+			// is padded; We will fallback on the current available window(at least a 1/4th of the limit).
+			f.delta = n
+		}
+		f.mu.Unlock()
+		return f.delta
+	}
+	f.mu.Unlock()
+	return 0
+}
+
+// onData is invoked when some data frame is received. It updates pendingData.
+func (f *inFlow) onData(n uint32) error {
+	f.mu.Lock()
+	f.pendingData += n
+	if f.pendingData+f.pendingUpdate > f.limit+f.delta {
+		limit := f.limit
+		rcvd := f.pendingData + f.pendingUpdate
+		f.mu.Unlock()
+		return fmt.Errorf("received %d-bytes data exceeding the limit %d bytes", rcvd, limit)
+	}
+	f.mu.Unlock()
+	return nil
+}
+
+// onRead is invoked when the application reads the data. It returns the window size
+// to be sent to the peer.
+func (f *inFlow) onRead(n uint32) uint32 {
+	f.mu.Lock()
+	if f.pendingData == 0 {
+		f.mu.Unlock()
+		return 0
+	}
+	f.pendingData -= n
+	if n > f.delta {
+		n -= f.delta
+		f.delta = 0
+	} else {
+		f.delta -= n
+		n = 0
+	}
+	f.pendingUpdate += n
+	if f.pendingUpdate >= f.limit/4 {
+		wu := f.pendingUpdate
+		f.pendingUpdate = 0
+		f.mu.Unlock()
+		return wu
+	}
+	f.mu.Unlock()
+	return 0
+}

vendor/google.golang.org/grpc/internal/transport/handler_server.go

@@ -0,0 +1,449 @@
+/*
+ *
+ * Copyright 2016 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file is the implementation of a gRPC server using HTTP/2 which
+// uses the standard Go http2 Server implementation (via the
+// http.Handler interface), rather than speaking low-level HTTP/2
+// frames itself. It is the implementation of *grpc.Server.ServeHTTP.
+
+package transport
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"net/http"
+	"strings"
+	"sync"
+	"time"
+
+	"github.com/golang/protobuf/proto"
+	"golang.org/x/net/http2"
+	"google.golang.org/grpc/codes"
+	"google.golang.org/grpc/credentials"
+	"google.golang.org/grpc/metadata"
+	"google.golang.org/grpc/peer"
+	"google.golang.org/grpc/stats"
+	"google.golang.org/grpc/status"
+)
+
+// NewServerHandlerTransport returns a ServerTransport handling gRPC
+// from inside an http.Handler. It requires that the http Server
+// supports HTTP/2.
+func NewServerHandlerTransport(w http.ResponseWriter, r *http.Request, stats stats.Handler) (ServerTransport, error) {
+	if r.ProtoMajor != 2 {
+		return nil, errors.New("gRPC requires HTTP/2")
+	}
+	if r.Method != "POST" {
+		return nil, errors.New("invalid gRPC request method")
+	}
+	contentType := r.Header.Get("Content-Type")
+	// TODO: do we assume contentType is lowercase? we did before
+	contentSubtype, validContentType := contentSubtype(contentType)
+	if !validContentType {
+		return nil, errors.New("invalid gRPC request content-type")
+	}
+	if _, ok := w.(http.Flusher); !ok {
+		return nil, errors.New("gRPC requires a ResponseWriter supporting http.Flusher")
+	}
+	if _, ok := w.(http.CloseNotifier); !ok {
+		return nil, errors.New("gRPC requires a ResponseWriter supporting http.CloseNotifier")
+	}
+
+	st := &serverHandlerTransport{
+		rw:             w,
+		req:            r,
+		closedCh:       make(chan struct{}),
+		writes:         make(chan func()),
+		contentType:    contentType,
+		contentSubtype: contentSubtype,
+		stats:          stats,
+	}
+
+	if v := r.Header.Get("grpc-timeout"); v != "" {
+		to, err := decodeTimeout(v)
+		if err != nil {
+			return nil, status.Errorf(codes.Internal, "malformed time-out: %v", err)
+		}
+		st.timeoutSet = true
+		st.timeout = to
+	}
+
+	metakv := []string{"content-type", contentType}
+	if r.Host != "" {
+		metakv = append(metakv, ":authority", r.Host)
+	}
+	for k, vv := range r.Header {
+		k = strings.ToLower(k)
+		if isReservedHeader(k) && !isWhitelistedHeader(k) {
+			continue
+		}
+		for _, v := range vv {
+			v, err := decodeMetadataHeader(k, v)
+			if err != nil {
+				return nil, status.Errorf(codes.Internal, "malformed binary metadata: %v", err)
+			}
+			metakv = append(metakv, k, v)
+		}
+	}
+	st.headerMD = metadata.Pairs(metakv...)
+
+	return st, nil
+}
+
+// serverHandlerTransport is an implementation of ServerTransport
+// which replies to exactly one gRPC request (exactly one HTTP request),
+// using the net/http.Handler interface. This http.Handler is guaranteed
+// at this point to be speaking over HTTP/2, so it's able to speak valid
+// gRPC.
+type serverHandlerTransport struct {
+	rw               http.ResponseWriter
+	req              *http.Request
+	timeoutSet       bool
+	timeout          time.Duration
+	didCommonHeaders bool
+
+	headerMD metadata.MD
+
+	closeOnce sync.Once
+	closedCh  chan struct{} // closed on Close
+
+	// writes is a channel of code to run serialized in the
+	// ServeHTTP (HandleStreams) goroutine. The channel is closed
+	// when WriteStatus is called.
+	writes chan func()
+
+	// block concurrent WriteStatus calls
+	// e.g. grpc/(*serverStream).SendMsg/RecvMsg
+	writeStatusMu sync.Mutex
+
+	// we just mirror the request content-type
+	contentType string
+	// we store both contentType and contentSubtype so we don't keep recreating them
+	// TODO make sure this is consistent across handler_server and http2_server
+	contentSubtype string
+
+	stats stats.Handler
+}
+
+func (ht *serverHandlerTransport) Close() error {
+	ht.closeOnce.Do(ht.closeCloseChanOnce)
+	return nil
+}
+
+func (ht *serverHandlerTransport) closeCloseChanOnce() { close(ht.closedCh) }
+
+func (ht *serverHandlerTransport) RemoteAddr() net.Addr { return strAddr(ht.req.RemoteAddr) }
+
+// strAddr is a net.Addr backed by either a TCP "ip:port" string, or
+// the empty string if unknown.
+type strAddr string
+
+func (a strAddr) Network() string {
+	if a != "" {
+		// Per the documentation on net/http.Request.RemoteAddr, if this is
+		// set, it's set to the IP:port of the peer (hence, TCP):
+		// https://golang.org/pkg/net/http/#Request
+		//
+		// If we want to support Unix sockets later, we can
+		// add our own grpc-specific convention within the
+		// grpc codebase to set RemoteAddr to a different
+		// format, or probably better: we can attach it to the
+		// context and use that from serverHandlerTransport.RemoteAddr.
+		return "tcp"
+	}
+	return ""
+}
+
+func (a strAddr) String() string { return string(a) }
+
+// do runs fn in the ServeHTTP goroutine.
+func (ht *serverHandlerTransport) do(fn func()) error {
+	// Avoid a panic writing to closed channel. Imperfect but maybe good enough.
+	select {
+	case <-ht.closedCh:
+		return ErrConnClosing
+	default:
+		select {
+		case ht.writes <- fn:
+			return nil
+		case <-ht.closedCh:
+			return ErrConnClosing
+		}
+	}
+}
+
+func (ht *serverHandlerTransport) WriteStatus(s *Stream, st *status.Status) error {
+	ht.writeStatusMu.Lock()
+	defer ht.writeStatusMu.Unlock()
+
+	err := ht.do(func() {
+		ht.writeCommonHeaders(s)
+
+		// And flush, in case no header or body has been sent yet.
+		// This forces a separation of headers and trailers if this is the
+		// first call (for example, in end2end tests's TestNoService).
+		ht.rw.(http.Flusher).Flush()
+
+		h := ht.rw.Header()
+		h.Set("Grpc-Status", fmt.Sprintf("%d", st.Code()))
+		if m := st.Message(); m != "" {
+			h.Set("Grpc-Message", encodeGrpcMessage(m))
+		}
+
+		if p := st.Proto(); p != nil && len(p.Details) > 0 {
+			stBytes, err := proto.Marshal(p)
+			if err != nil {
+				// TODO: return error instead, when callers are able to handle it.
+				panic(err)
+			}
+
+			h.Set("Grpc-Status-Details-Bin", encodeBinHeader(stBytes))
+		}
+
+		if md := s.Trailer(); len(md) > 0 {
+			for k, vv := range md {
+				// Clients don't tolerate reading restricted headers after some non restricted ones were sent.
+				if isReservedHeader(k) {
+					continue
+				}
+				for _, v := range vv {
+					// http2 ResponseWriter mechanism to send undeclared Trailers after
+					// the headers have possibly been written.
+					h.Add(http2.TrailerPrefix+k, encodeMetadataHeader(k, v))
+				}
+			}
+		}
+	})
+
+	if err == nil { // transport has not been closed
+		if ht.stats != nil {
+			ht.stats.HandleRPC(s.Context(), &stats.OutTrailer{})
+		}
+		close(ht.writes)
+	}
+	ht.Close()
+	return err
+}
+
+// writeCommonHeaders sets common headers on the first write
+// call (Write, WriteHeader, or WriteStatus).
+func (ht *serverHandlerTransport) writeCommonHeaders(s *Stream) {
+	if ht.didCommonHeaders {
+		return
+	}
+	ht.didCommonHeaders = true
+
+	h := ht.rw.Header()
+	h["Date"] = nil // suppress Date to make tests happy; TODO: restore
+	h.Set("Content-Type", ht.contentType)
+
+	// Predeclare trailers we'll set later in WriteStatus (after the body).
+	// This is a SHOULD in the HTTP RFC, and the way you add (known)
+	// Trailers per the net/http.ResponseWriter contract.
+	// See https://golang.org/pkg/net/http/#ResponseWriter
+	// and https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+	h.Add("Trailer", "Grpc-Status")
+	h.Add("Trailer", "Grpc-Message")
+	h.Add("Trailer", "Grpc-Status-Details-Bin")
+
+	if s.sendCompress != "" {
+		h.Set("Grpc-Encoding", s.sendCompress)
+	}
+}
+
+func (ht *serverHandlerTransport) Write(s *Stream, hdr []byte, data []byte, opts *Options) error {
+	return ht.do(func() {
+		ht.writeCommonHeaders(s)
+		ht.rw.Write(hdr)
+		ht.rw.Write(data)
+		ht.rw.(http.Flusher).Flush()
+	})
+}
+
+func (ht *serverHandlerTransport) WriteHeader(s *Stream, md metadata.MD) error {
+	err := ht.do(func() {
+		ht.writeCommonHeaders(s)
+		h := ht.rw.Header()
+		for k, vv := range md {
+			// Clients don't tolerate reading restricted headers after some non restricted ones were sent.
+			if isReservedHeader(k) {
+				continue
+			}
+			for _, v := range vv {
+				v = encodeMetadataHeader(k, v)
+				h.Add(k, v)
+			}
+		}
+		ht.rw.WriteHeader(200)
+		ht.rw.(http.Flusher).Flush()
+	})
+
+	if err == nil {
+		if ht.stats != nil {
+			ht.stats.HandleRPC(s.Context(), &stats.OutHeader{})
+		}
+	}
+	return err
+}
+
+func (ht *serverHandlerTransport) HandleStreams(startStream func(*Stream), traceCtx func(context.Context, string) context.Context) {
+	// With this transport type there will be exactly 1 stream: this HTTP request.
+
+	ctx := ht.req.Context()
+	var cancel context.CancelFunc
+	if ht.timeoutSet {
+		ctx, cancel = context.WithTimeout(ctx, ht.timeout)
+	} else {
+		ctx, cancel = context.WithCancel(ctx)
+	}
+
+	// requestOver is closed when either the request's context is done
+	// or the status has been written via WriteStatus.
+	requestOver := make(chan struct{})
+
+	// clientGone receives a single value if peer is gone, either
+	// because the underlying connection is dead or because the
+	// peer sends an http2 RST_STREAM.
+	clientGone := ht.rw.(http.CloseNotifier).CloseNotify()
+	go func() {
+		select {
+		case <-requestOver:
+		case <-ht.closedCh:
+		case <-clientGone:
+		}
+		cancel()
+		ht.Close()
+	}()
+
+	req := ht.req
+
+	s := &Stream{
+		id:             0, // irrelevant
+		requestRead:    func(int) {},
+		cancel:         cancel,
+		buf:            newRecvBuffer(),
+		st:             ht,
+		method:         req.URL.Path,
+		recvCompress:   req.Header.Get("grpc-encoding"),
+		contentSubtype: ht.contentSubtype,
+	}
+	pr := &peer.Peer{
+		Addr: ht.RemoteAddr(),
+	}
+	if req.TLS != nil {
+		pr.AuthInfo = credentials.TLSInfo{State: *req.TLS}
+	}
+	ctx = metadata.NewIncomingContext(ctx, ht.headerMD)
+	s.ctx = peer.NewContext(ctx, pr)
+	if ht.stats != nil {
+		s.ctx = ht.stats.TagRPC(s.ctx, &stats.RPCTagInfo{FullMethodName: s.method})
+		inHeader := &stats.InHeader{
+			FullMethod:  s.method,
+			RemoteAddr:  ht.RemoteAddr(),
+			Compression: s.recvCompress,
+		}
+		ht.stats.HandleRPC(s.ctx, inHeader)
+	}
+	s.trReader = &transportReader{
+		reader:        &recvBufferReader{ctx: s.ctx, ctxDone: s.ctx.Done(), recv: s.buf},
+		windowHandler: func(int) {},
+	}
+
+	// readerDone is closed when the Body.Read-ing goroutine exits.
+	readerDone := make(chan struct{})
+	go func() {
+		defer close(readerDone)
+
+		// TODO: minimize garbage, optimize recvBuffer code/ownership
+		const readSize = 8196
+		for buf := make([]byte, readSize); ; {
+			n, err := req.Body.Read(buf)
+			if n > 0 {
+				s.buf.put(recvMsg{data: buf[:n:n]})
+				buf = buf[n:]
+			}
+			if err != nil {
+				s.buf.put(recvMsg{err: mapRecvMsgError(err)})
+				return
+			}
+			if len(buf) == 0 {
+				buf = make([]byte, readSize)
+			}
+		}
+	}()
+
+	// startStream is provided by the *grpc.Server's serveStreams.
+	// It starts a goroutine serving s and exits immediately.
+	// The goroutine that is started is the one that then calls
+	// into ht, calling WriteHeader, Write, WriteStatus, Close, etc.
+	startStream(s)
+
+	ht.runStream()
+	close(requestOver)
+
+	// Wait for reading goroutine to finish.
+	req.Body.Close()
+	<-readerDone
+}
+
+func (ht *serverHandlerTransport) runStream() {
+	for {
+		select {
+		case fn, ok := <-ht.writes:
+			if !ok {
+				return
+			}
+			fn()
+		case <-ht.closedCh:
+			return
+		}
+	}
+}
+
+func (ht *serverHandlerTransport) IncrMsgSent() {}
+
+func (ht *serverHandlerTransport) IncrMsgRecv() {}
+
+func (ht *serverHandlerTransport) Drain() {
+	panic("Drain() is not implemented")
+}
+
+// mapRecvMsgError returns the non-nil err into the appropriate
+// error value as expected by callers of *grpc.parser.recvMsg.
+// In particular, in can only be:
+//   * io.EOF
+//   * io.ErrUnexpectedEOF
+//   * of type transport.ConnectionError
+//   * an error from the status package
+func mapRecvMsgError(err error) error {
+	if err == io.EOF || err == io.ErrUnexpectedEOF {
+		return err
+	}
+	if se, ok := err.(http2.StreamError); ok {
+		if code, ok := http2ErrConvTab[se.Code]; ok {
+			return status.Error(code, se.Error())
+		}
+	}
+	if strings.Contains(err.Error(), "body closed by handler") {
+		return status.Error(codes.Canceled, err.Error())
+	}
+	return connectionErrorf(true, err, err.Error())
+}

vendor/google.golang.org/grpc/internal/transport/http_util.go

@@ -0,0 +1,623 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package transport
+
+import (
+	"bufio"
+	"bytes"
+	"encoding/base64"
+	"fmt"
+	"io"
+	"math"
+	"net"
+	"net/http"
+	"strconv"
+	"strings"
+	"time"
+	"unicode/utf8"
+
+	"github.com/golang/protobuf/proto"
+	"golang.org/x/net/http2"
+	"golang.org/x/net/http2/hpack"
+	spb "google.golang.org/genproto/googleapis/rpc/status"
+	"google.golang.org/grpc/codes"
+	"google.golang.org/grpc/status"
+)
+
+const (
+	// http2MaxFrameLen specifies the max length of a HTTP2 frame.
+	http2MaxFrameLen = 16384 // 16KB frame
+	// http://http2.github.io/http2-spec/#SettingValues
+	http2InitHeaderTableSize = 4096
+	// baseContentType is the base content-type for gRPC.  This is a valid
+	// content-type on it's own, but can also include a content-subtype such as
+	// "proto" as a suffix after "+" or ";".  See
+	// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests
+	// for more details.
+	baseContentType = "application/grpc"
+)
+
+var (
+	clientPreface   = []byte(http2.ClientPreface)
+	http2ErrConvTab = map[http2.ErrCode]codes.Code{
+		http2.ErrCodeNo:                 codes.Internal,
+		http2.ErrCodeProtocol:           codes.Internal,
+		http2.ErrCodeInternal:           codes.Internal,
+		http2.ErrCodeFlowControl:        codes.ResourceExhausted,
+		http2.ErrCodeSettingsTimeout:    codes.Internal,
+		http2.ErrCodeStreamClosed:       codes.Internal,
+		http2.ErrCodeFrameSize:          codes.Internal,
+		http2.ErrCodeRefusedStream:      codes.Unavailable,
+		http2.ErrCodeCancel:             codes.Canceled,
+		http2.ErrCodeCompression:        codes.Internal,
+		http2.ErrCodeConnect:            codes.Internal,
+		http2.ErrCodeEnhanceYourCalm:    codes.ResourceExhausted,
+		http2.ErrCodeInadequateSecurity: codes.PermissionDenied,
+		http2.ErrCodeHTTP11Required:     codes.Internal,
+	}
+	statusCodeConvTab = map[codes.Code]http2.ErrCode{
+		codes.Internal:          http2.ErrCodeInternal,
+		codes.Canceled:          http2.ErrCodeCancel,
+		codes.Unavailable:       http2.ErrCodeRefusedStream,
+		codes.ResourceExhausted: http2.ErrCodeEnhanceYourCalm,
+		codes.PermissionDenied:  http2.ErrCodeInadequateSecurity,
+	}
+	httpStatusConvTab = map[int]codes.Code{
+		// 400 Bad Request - INTERNAL.
+		http.StatusBadRequest: codes.Internal,
+		// 401 Unauthorized  - UNAUTHENTICATED.
+		http.StatusUnauthorized: codes.Unauthenticated,
+		// 403 Forbidden - PERMISSION_DENIED.
+		http.StatusForbidden: codes.PermissionDenied,
+		// 404 Not Found - UNIMPLEMENTED.
+		http.StatusNotFound: codes.Unimplemented,
+		// 429 Too Many Requests - UNAVAILABLE.
+		http.StatusTooManyRequests: codes.Unavailable,
+		// 502 Bad Gateway - UNAVAILABLE.
+		http.StatusBadGateway: codes.Unavailable,
+		// 503 Service Unavailable - UNAVAILABLE.
+		http.StatusServiceUnavailable: codes.Unavailable,
+		// 504 Gateway timeout - UNAVAILABLE.
+		http.StatusGatewayTimeout: codes.Unavailable,
+	}
+)
+
+// Records the states during HPACK decoding. Must be reset once the
+// decoding of the entire headers are finished.
+type decodeState struct {
+	encoding string
+	// statusGen caches the stream status received from the trailer the server
+	// sent.  Client side only.  Do not access directly.  After all trailers are
+	// parsed, use the status method to retrieve the status.
+	statusGen *status.Status
+	// rawStatusCode and rawStatusMsg are set from the raw trailer fields and are not
+	// intended for direct access outside of parsing.
+	rawStatusCode *int
+	rawStatusMsg  string
+	httpStatus    *int
+	// Server side only fields.
+	timeoutSet bool
+	timeout    time.Duration
+	method     string
+	// key-value metadata map from the peer.
+	mdata          map[string][]string
+	statsTags      []byte
+	statsTrace     []byte
+	contentSubtype string
+	// whether decoding on server side or not
+	serverSide bool
+}
+
+// isReservedHeader checks whether hdr belongs to HTTP2 headers
+// reserved by gRPC protocol. Any other headers are classified as the
+// user-specified metadata.
+func isReservedHeader(hdr string) bool {
+	if hdr != "" && hdr[0] == ':' {
+		return true
+	}
+	switch hdr {
+	case "content-type",
+		"user-agent",
+		"grpc-message-type",
+		"grpc-encoding",
+		"grpc-message",
+		"grpc-status",
+		"grpc-timeout",
+		"grpc-status-details-bin",
+		// Intentionally exclude grpc-previous-rpc-attempts and
+		// grpc-retry-pushback-ms, which are "reserved", but their API
+		// intentionally works via metadata.
+		"te":
+		return true
+	default:
+		return false
+	}
+}
+
+// isWhitelistedHeader checks whether hdr should be propagated into metadata
+// visible to users, even though it is classified as "reserved", above.
+func isWhitelistedHeader(hdr string) bool {
+	switch hdr {
+	case ":authority", "user-agent":
+		return true
+	default:
+		return false
+	}
+}
+
+// contentSubtype returns the content-subtype for the given content-type.  The
+// given content-type must be a valid content-type that starts with
+// "application/grpc". A content-subtype will follow "application/grpc" after a
+// "+" or ";". See
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details.
+//
+// If contentType is not a valid content-type for gRPC, the boolean
+// will be false, otherwise true. If content-type == "application/grpc",
+// "application/grpc+", or "application/grpc;", the boolean will be true,
+// but no content-subtype will be returned.
+//
+// contentType is assumed to be lowercase already.
+func contentSubtype(contentType string) (string, bool) {
+	if contentType == baseContentType {
+		return "", true
+	}
+	if !strings.HasPrefix(contentType, baseContentType) {
+		return "", false
+	}
+	// guaranteed since != baseContentType and has baseContentType prefix
+	switch contentType[len(baseContentType)] {
+	case '+', ';':
+		// this will return true for "application/grpc+" or "application/grpc;"
+		// which the previous validContentType function tested to be valid, so we
+		// just say that no content-subtype is specified in this case
+		return contentType[len(baseContentType)+1:], true
+	default:
+		return "", false
+	}
+}
+
+// contentSubtype is assumed to be lowercase
+func contentType(contentSubtype string) string {
+	if contentSubtype == "" {
+		return baseContentType
+	}
+	return baseContentType + "+" + contentSubtype
+}
+
+func (d *decodeState) status() *status.Status {
+	if d.statusGen == nil {
+		// No status-details were provided; generate status using code/msg.
+		d.statusGen = status.New(codes.Code(int32(*(d.rawStatusCode))), d.rawStatusMsg)
+	}
+	return d.statusGen
+}
+
+const binHdrSuffix = "-bin"
+
+func encodeBinHeader(v []byte) string {
+	return base64.RawStdEncoding.EncodeToString(v)
+}
+
+func decodeBinHeader(v string) ([]byte, error) {
+	if len(v)%4 == 0 {
+		// Input was padded, or padding was not necessary.
+		return base64.StdEncoding.DecodeString(v)
+	}
+	return base64.RawStdEncoding.DecodeString(v)
+}
+
+func encodeMetadataHeader(k, v string) string {
+	if strings.HasSuffix(k, binHdrSuffix) {
+		return encodeBinHeader(([]byte)(v))
+	}
+	return v
+}
+
+func decodeMetadataHeader(k, v string) (string, error) {
+	if strings.HasSuffix(k, binHdrSuffix) {
+		b, err := decodeBinHeader(v)
+		return string(b), err
+	}
+	return v, nil
+}
+
+func (d *decodeState) decodeHeader(frame *http2.MetaHeadersFrame) error {
+	// frame.Truncated is set to true when framer detects that the current header
+	// list size hits MaxHeaderListSize limit.
+	if frame.Truncated {
+		return status.Error(codes.Internal, "peer header list size exceeded limit")
+	}
+	for _, hf := range frame.Fields {
+		if err := d.processHeaderField(hf); err != nil {
+			return err
+		}
+	}
+
+	if d.serverSide {
+		return nil
+	}
+
+	// If grpc status exists, no need to check further.
+	if d.rawStatusCode != nil || d.statusGen != nil {
+		return nil
+	}
+
+	// If grpc status doesn't exist and http status doesn't exist,
+	// then it's a malformed header.
+	if d.httpStatus == nil {
+		return status.Error(codes.Internal, "malformed header: doesn't contain status(gRPC or HTTP)")
+	}
+
+	if *(d.httpStatus) != http.StatusOK {
+		code, ok := httpStatusConvTab[*(d.httpStatus)]
+		if !ok {
+			code = codes.Unknown
+		}
+		return status.Error(code, http.StatusText(*(d.httpStatus)))
+	}
+
+	// gRPC status doesn't exist and http status is OK.
+	// Set rawStatusCode to be unknown and return nil error.
+	// So that, if the stream has ended this Unknown status
+	// will be propagated to the user.
+	// Otherwise, it will be ignored. In which case, status from
+	// a later trailer, that has StreamEnded flag set, is propagated.
+	code := int(codes.Unknown)
+	d.rawStatusCode = &code
+	return nil
+}
+
+func (d *decodeState) addMetadata(k, v string) {
+	if d.mdata == nil {
+		d.mdata = make(map[string][]string)
+	}
+	d.mdata[k] = append(d.mdata[k], v)
+}
+
+func (d *decodeState) processHeaderField(f hpack.HeaderField) error {
+	switch f.Name {
+	case "content-type":
+		contentSubtype, validContentType := contentSubtype(f.Value)
+		if !validContentType {
+			return status.Errorf(codes.Internal, "transport: received the unexpected content-type %q", f.Value)
+		}
+		d.contentSubtype = contentSubtype
+		// TODO: do we want to propagate the whole content-type in the metadata,
+		// or come up with a way to just propagate the content-subtype if it was set?
+		// ie {"content-type": "application/grpc+proto"} or {"content-subtype": "proto"}
+		// in the metadata?
+		d.addMetadata(f.Name, f.Value)
+	case "grpc-encoding":
+		d.encoding = f.Value
+	case "grpc-status":
+		code, err := strconv.Atoi(f.Value)
+		if err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed grpc-status: %v", err)
+		}
+		d.rawStatusCode = &code
+	case "grpc-message":
+		d.rawStatusMsg = decodeGrpcMessage(f.Value)
+	case "grpc-status-details-bin":
+		v, err := decodeBinHeader(f.Value)
+		if err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err)
+		}
+		s := &spb.Status{}
+		if err := proto.Unmarshal(v, s); err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err)
+		}
+		d.statusGen = status.FromProto(s)
+	case "grpc-timeout":
+		d.timeoutSet = true
+		var err error
+		if d.timeout, err = decodeTimeout(f.Value); err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed time-out: %v", err)
+		}
+	case ":path":
+		d.method = f.Value
+	case ":status":
+		code, err := strconv.Atoi(f.Value)
+		if err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed http-status: %v", err)
+		}
+		d.httpStatus = &code
+	case "grpc-tags-bin":
+		v, err := decodeBinHeader(f.Value)
+		if err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed grpc-tags-bin: %v", err)
+		}
+		d.statsTags = v
+		d.addMetadata(f.Name, string(v))
+	case "grpc-trace-bin":
+		v, err := decodeBinHeader(f.Value)
+		if err != nil {
+			return status.Errorf(codes.Internal, "transport: malformed grpc-trace-bin: %v", err)
+		}
+		d.statsTrace = v
+		d.addMetadata(f.Name, string(v))
+	default:
+		if isReservedHeader(f.Name) && !isWhitelistedHeader(f.Name) {
+			break
+		}
+		v, err := decodeMetadataHeader(f.Name, f.Value)
+		if err != nil {
+			errorf("Failed to decode metadata header (%q, %q): %v", f.Name, f.Value, err)
+			return nil
+		}
+		d.addMetadata(f.Name, v)
+	}
+	return nil
+}
+
+type timeoutUnit uint8
+
+const (
+	hour        timeoutUnit = 'H'
+	minute      timeoutUnit = 'M'
+	second      timeoutUnit = 'S'
+	millisecond timeoutUnit = 'm'
+	microsecond timeoutUnit = 'u'
+	nanosecond  timeoutUnit = 'n'
+)
+
+func timeoutUnitToDuration(u timeoutUnit) (d time.Duration, ok bool) {
+	switch u {
+	case hour:
+		return time.Hour, true
+	case minute:
+		return time.Minute, true
+	case second:
+		return time.Second, true
+	case millisecond:
+		return time.Millisecond, true
+	case microsecond:
+		return time.Microsecond, true
+	case nanosecond:
+		return time.Nanosecond, true
+	default:
+	}
+	return
+}
+
+const maxTimeoutValue int64 = 100000000 - 1
+
+// div does integer division and round-up the result. Note that this is
+// equivalent to (d+r-1)/r but has less chance to overflow.
+func div(d, r time.Duration) int64 {
+	if m := d % r; m > 0 {
+		return int64(d/r + 1)
+	}
+	return int64(d / r)
+}
+
+// TODO(zhaoq): It is the simplistic and not bandwidth efficient. Improve it.
+func encodeTimeout(t time.Duration) string {
+	if t <= 0 {
+		return "0n"
+	}
+	if d := div(t, time.Nanosecond); d <= maxTimeoutValue {
+		return strconv.FormatInt(d, 10) + "n"
+	}
+	if d := div(t, time.Microsecond); d <= maxTimeoutValue {
+		return strconv.FormatInt(d, 10) + "u"
+	}
+	if d := div(t, time.Millisecond); d <= maxTimeoutValue {
+		return strconv.FormatInt(d, 10) + "m"
+	}
+	if d := div(t, time.Second); d <= maxTimeoutValue {
+		return strconv.FormatInt(d, 10) + "S"
+	}
+	if d := div(t, time.Minute); d <= maxTimeoutValue {
+		return strconv.FormatInt(d, 10) + "M"
+	}
+	// Note that maxTimeoutValue * time.Hour > MaxInt64.
+	return strconv.FormatInt(div(t, time.Hour), 10) + "H"
+}
+
+func decodeTimeout(s string) (time.Duration, error) {
+	size := len(s)
+	if size < 2 {
+		return 0, fmt.Errorf("transport: timeout string is too short: %q", s)
+	}
+	if size > 9 {
+		// Spec allows for 8 digits plus the unit.
+		return 0, fmt.Errorf("transport: timeout string is too long: %q", s)
+	}
+	unit := timeoutUnit(s[size-1])
+	d, ok := timeoutUnitToDuration(unit)
+	if !ok {
+		return 0, fmt.Errorf("transport: timeout unit is not recognized: %q", s)
+	}
+	t, err := strconv.ParseInt(s[:size-1], 10, 64)
+	if err != nil {
+		return 0, err
+	}
+	const maxHours = math.MaxInt64 / int64(time.Hour)
+	if d == time.Hour && t > maxHours {
+		// This timeout would overflow math.MaxInt64; clamp it.
+		return time.Duration(math.MaxInt64), nil
+	}
+	return d * time.Duration(t), nil
+}
+
+const (
+	spaceByte   = ' '
+	tildeByte   = '~'
+	percentByte = '%'
+)
+
+// encodeGrpcMessage is used to encode status code in header field
+// "grpc-message". It does percent encoding and also replaces invalid utf-8
+// characters with Unicode replacement character.
+//
+// It checks to see if each individual byte in msg is an allowable byte, and
+// then either percent encoding or passing it through. When percent encoding,
+// the byte is converted into hexadecimal notation with a '%' prepended.
+func encodeGrpcMessage(msg string) string {
+	if msg == "" {
+		return ""
+	}
+	lenMsg := len(msg)
+	for i := 0; i < lenMsg; i++ {
+		c := msg[i]
+		if !(c >= spaceByte && c <= tildeByte && c != percentByte) {
+			return encodeGrpcMessageUnchecked(msg)
+		}
+	}
+	return msg
+}
+
+func encodeGrpcMessageUnchecked(msg string) string {
+	var buf bytes.Buffer
+	for len(msg) > 0 {
+		r, size := utf8.DecodeRuneInString(msg)
+		for _, b := range []byte(string(r)) {
+			if size > 1 {
+				// If size > 1, r is not ascii. Always do percent encoding.
+				buf.WriteString(fmt.Sprintf("%%%02X", b))
+				continue
+			}
+
+			// The for loop is necessary even if size == 1. r could be
+			// utf8.RuneError.
+			//
+			// fmt.Sprintf("%%%02X", utf8.RuneError) gives "%FFFD".
+			if b >= spaceByte && b <= tildeByte && b != percentByte {
+				buf.WriteByte(b)
+			} else {
+				buf.WriteString(fmt.Sprintf("%%%02X", b))
+			}
+		}
+		msg = msg[size:]
+	}
+	return buf.String()
+}
+
+// decodeGrpcMessage decodes the msg encoded by encodeGrpcMessage.
+func decodeGrpcMessage(msg string) string {
+	if msg == "" {
+		return ""
+	}
+	lenMsg := len(msg)
+	for i := 0; i < lenMsg; i++ {
+		if msg[i] == percentByte && i+2 < lenMsg {
+			return decodeGrpcMessageUnchecked(msg)
+		}
+	}
+	return msg
+}
+
+func decodeGrpcMessageUnchecked(msg string) string {
+	var buf bytes.Buffer
+	lenMsg := len(msg)
+	for i := 0; i < lenMsg; i++ {
+		c := msg[i]
+		if c == percentByte && i+2 < lenMsg {
+			parsed, err := strconv.ParseUint(msg[i+1:i+3], 16, 8)
+			if err != nil {
+				buf.WriteByte(c)
+			} else {
+				buf.WriteByte(byte(parsed))
+				i += 2
+			}
+		} else {
+			buf.WriteByte(c)
+		}
+	}
+	return buf.String()
+}
+
+type bufWriter struct {
+	buf       []byte
+	offset    int
+	batchSize int
+	conn      net.Conn
+	err       error
+
+	onFlush func()
+}
+
+func newBufWriter(conn net.Conn, batchSize int) *bufWriter {
+	return &bufWriter{
+		buf:       make([]byte, batchSize*2),
+		batchSize: batchSize,
+		conn:      conn,
+	}
+}
+
+func (w *bufWriter) Write(b []byte) (n int, err error) {
+	if w.err != nil {
+		return 0, w.err
+	}
+	if w.batchSize == 0 { // Buffer has been disabled.
+		return w.conn.Write(b)
+	}
+	for len(b) > 0 {
+		nn := copy(w.buf[w.offset:], b)
+		b = b[nn:]
+		w.offset += nn
+		n += nn
+		if w.offset >= w.batchSize {
+			err = w.Flush()
+		}
+	}
+	return n, err
+}
+
+func (w *bufWriter) Flush() error {
+	if w.err != nil {
+		return w.err
+	}
+	if w.offset == 0 {
+		return nil
+	}
+	if w.onFlush != nil {
+		w.onFlush()
+	}
+	_, w.err = w.conn.Write(w.buf[:w.offset])
+	w.offset = 0
+	return w.err
+}
+
+type framer struct {
+	writer *bufWriter
+	fr     *http2.Framer
+}
+
+func newFramer(conn net.Conn, writeBufferSize, readBufferSize int, maxHeaderListSize uint32) *framer {
+	if writeBufferSize < 0 {
+		writeBufferSize = 0
+	}
+	var r io.Reader = conn
+	if readBufferSize > 0 {
+		r = bufio.NewReaderSize(r, readBufferSize)
+	}
+	w := newBufWriter(conn, writeBufferSize)
+	f := &framer{
+		writer: w,
+		fr:     http2.NewFramer(w, r),
+	}
+	// Opt-in to Frame reuse API on framer to reduce garbage.
+	// Frames aren't safe to read from after a subsequent call to ReadFrame.
+	f.fr.SetReuseFrames()
+	f.fr.MaxHeaderListSize = maxHeaderListSize
+	f.fr.ReadMetaHeaders = hpack.NewDecoder(http2InitHeaderTableSize, nil)
+	return f
+}

vendor/google.golang.org/grpc/internal/transport/log.go

@@ -0,0 +1,44 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// This file contains wrappers for grpclog functions.
+// The transport package only logs to verbose level 2 by default.
+
+package transport
+
+import "google.golang.org/grpc/grpclog"
+
+const logLevel = 2
+
+func infof(format string, args ...interface{}) {
+	if grpclog.V(logLevel) {
+		grpclog.Infof(format, args...)
+	}
+}
+
+func warningf(format string, args ...interface{}) {
+	if grpclog.V(logLevel) {
+		grpclog.Warningf(format, args...)
+	}
+}
+
+func errorf(format string, args ...interface{}) {
+	if grpclog.V(logLevel) {
+		grpclog.Errorf(format, args...)
+	}
+}

vendor/google.golang.org/grpc/internal/transport/transport.go

@@ -0,0 +1,758 @@
+/*
+ *
+ * Copyright 2014 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package transport defines and implements message oriented communication
+// channel to complete various transactions (e.g., an RPC).  It is meant for
+// grpc-internal usage and is not intended to be imported directly by users.
+package transport
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"sync"
+	"sync/atomic"
+
+	"google.golang.org/grpc/codes"
+	"google.golang.org/grpc/credentials"
+	"google.golang.org/grpc/keepalive"
+	"google.golang.org/grpc/metadata"
+	"google.golang.org/grpc/stats"
+	"google.golang.org/grpc/status"
+	"google.golang.org/grpc/tap"
+)
+
+// recvMsg represents the received msg from the transport. All transport
+// protocol specific info has been removed.
+type recvMsg struct {
+	data []byte
+	// nil: received some data
+	// io.EOF: stream is completed. data is nil.
+	// other non-nil error: transport failure. data is nil.
+	err error
+}
+
+// recvBuffer is an unbounded channel of recvMsg structs.
+// Note recvBuffer differs from controlBuffer only in that recvBuffer
+// holds a channel of only recvMsg structs instead of objects implementing "item" interface.
+// recvBuffer is written to much more often than
+// controlBuffer and using strict recvMsg structs helps avoid allocation in "recvBuffer.put"
+type recvBuffer struct {
+	c       chan recvMsg
+	mu      sync.Mutex
+	backlog []recvMsg
+	err     error
+}
+
+func newRecvBuffer() *recvBuffer {
+	b := &recvBuffer{
+		c: make(chan recvMsg, 1),
+	}
+	return b
+}
+
+func (b *recvBuffer) put(r recvMsg) {
+	b.mu.Lock()
+	if b.err != nil {
+		b.mu.Unlock()
+		// An error had occurred earlier, don't accept more
+		// data or errors.
+		return
+	}
+	b.err = r.err
+	if len(b.backlog) == 0 {
+		select {
+		case b.c <- r:
+			b.mu.Unlock()
+			return
+		default:
+		}
+	}
+	b.backlog = append(b.backlog, r)
+	b.mu.Unlock()
+}
+
+func (b *recvBuffer) load() {
+	b.mu.Lock()
+	if len(b.backlog) > 0 {
+		select {
+		case b.c <- b.backlog[0]:
+			b.backlog[0] = recvMsg{}
+			b.backlog = b.backlog[1:]
+		default:
+		}
+	}
+	b.mu.Unlock()
+}
+
+// get returns the channel that receives a recvMsg in the buffer.
+//
+// Upon receipt of a recvMsg, the caller should call load to send another
+// recvMsg onto the channel if there is any.
+func (b *recvBuffer) get() <-chan recvMsg {
+	return b.c
+}
+
+// recvBufferReader implements io.Reader interface to read the data from
+// recvBuffer.
+type recvBufferReader struct {
+	closeStream func(error) // Closes the client transport stream with the given error and nil trailer metadata.
+	ctx         context.Context
+	ctxDone     <-chan struct{} // cache of ctx.Done() (for performance).
+	recv        *recvBuffer
+	last        []byte // Stores the remaining data in the previous calls.
+	err         error
+}
+
+// Read reads the next len(p) bytes from last. If last is drained, it tries to
+// read additional data from recv. It blocks if there no additional data available
+// in recv. If Read returns any non-nil error, it will continue to return that error.
+func (r *recvBufferReader) Read(p []byte) (n int, err error) {
+	if r.err != nil {
+		return 0, r.err
+	}
+	if r.last != nil && len(r.last) > 0 {
+		// Read remaining data left in last call.
+		copied := copy(p, r.last)
+		r.last = r.last[copied:]
+		return copied, nil
+	}
+	if r.closeStream != nil {
+		n, r.err = r.readClient(p)
+	} else {
+		n, r.err = r.read(p)
+	}
+	return n, r.err
+}
+
+func (r *recvBufferReader) read(p []byte) (n int, err error) {
+	select {
+	case <-r.ctxDone:
+		return 0, ContextErr(r.ctx.Err())
+	case m := <-r.recv.get():
+		return r.readAdditional(m, p)
+	}
+}
+
+func (r *recvBufferReader) readClient(p []byte) (n int, err error) {
+	// If the context is canceled, then closes the stream with nil metadata.
+	// closeStream writes its error parameter to r.recv as a recvMsg.
+	// r.readAdditional acts on that message and returns the necessary error.
+	select {
+	case <-r.ctxDone:
+		r.closeStream(ContextErr(r.ctx.Err()))
+		m := <-r.recv.get()
+		return r.readAdditional(m, p)
+	case m := <-r.recv.get():
+		return r.readAdditional(m, p)
+	}
+}
+
+func (r *recvBufferReader) readAdditional(m recvMsg, p []byte) (n int, err error) {
+	r.recv.load()
+	if m.err != nil {
+		return 0, m.err
+	}
+	copied := copy(p, m.data)
+	r.last = m.data[copied:]
+	return copied, nil
+}
+
+type streamState uint32
+
+const (
+	streamActive    streamState = iota
+	streamWriteDone             // EndStream sent
+	streamReadDone              // EndStream received
+	streamDone                  // the entire stream is finished.
+)
+
+// Stream represents an RPC in the transport layer.
+type Stream struct {
+	id           uint32
+	st           ServerTransport    // nil for client side Stream
+	ctx          context.Context    // the associated context of the stream
+	cancel       context.CancelFunc // always nil for client side Stream
+	done         chan struct{}      // closed at the end of stream to unblock writers. On the client side.
+	ctxDone      <-chan struct{}    // same as done chan but for server side. Cache of ctx.Done() (for performance)
+	method       string             // the associated RPC method of the stream
+	recvCompress string
+	sendCompress string
+	buf          *recvBuffer
+	trReader     io.Reader
+	fc           *inFlow
+	wq           *writeQuota
+
+	// Callback to state application's intentions to read data. This
+	// is used to adjust flow control, if needed.
+	requestRead func(int)
+
+	headerChan chan struct{} // closed to indicate the end of header metadata.
+	headerDone uint32        // set when headerChan is closed. Used to avoid closing headerChan multiple times.
+
+	// hdrMu protects header and trailer metadata on the server-side.
+	hdrMu sync.Mutex
+	// On client side, header keeps the received header metadata.
+	//
+	// On server side, header keeps the header set by SetHeader(). The complete
+	// header will merged into this after t.WriteHeader() is called.
+	header  metadata.MD
+	trailer metadata.MD // the key-value map of trailer metadata.
+
+	noHeaders bool // set if the client never received headers (set only after the stream is done).
+
+	// On the server-side, headerSent is atomically set to 1 when the headers are sent out.
+	headerSent uint32
+
+	state streamState
+
+	// On client-side it is the status error received from the server.
+	// On server-side it is unused.
+	status *status.Status
+
+	bytesReceived uint32 // indicates whether any bytes have been received on this stream
+	unprocessed   uint32 // set if the server sends a refused stream or GOAWAY including this stream
+
+	// contentSubtype is the content-subtype for requests.
+	// this must be lowercase or the behavior is undefined.
+	contentSubtype string
+}
+
+// isHeaderSent is only valid on the server-side.
+func (s *Stream) isHeaderSent() bool {
+	return atomic.LoadUint32(&s.headerSent) == 1
+}
+
+// updateHeaderSent updates headerSent and returns true
+// if it was alreay set. It is valid only on server-side.
+func (s *Stream) updateHeaderSent() bool {
+	return atomic.SwapUint32(&s.headerSent, 1) == 1
+}
+
+func (s *Stream) swapState(st streamState) streamState {
+	return streamState(atomic.SwapUint32((*uint32)(&s.state), uint32(st)))
+}
+
+func (s *Stream) compareAndSwapState(oldState, newState streamState) bool {
+	return atomic.CompareAndSwapUint32((*uint32)(&s.state), uint32(oldState), uint32(newState))
+}
+
+func (s *Stream) getState() streamState {
+	return streamState(atomic.LoadUint32((*uint32)(&s.state)))
+}
+
+func (s *Stream) waitOnHeader() error {
+	if s.headerChan == nil {
+		// On the server headerChan is always nil since a stream originates
+		// only after having received headers.
+		return nil
+	}
+	select {
+	case <-s.ctx.Done():
+		return ContextErr(s.ctx.Err())
+	case <-s.headerChan:
+		return nil
+	}
+}
+
+// RecvCompress returns the compression algorithm applied to the inbound
+// message. It is empty string if there is no compression applied.
+func (s *Stream) RecvCompress() string {
+	if err := s.waitOnHeader(); err != nil {
+		return ""
+	}
+	return s.recvCompress
+}
+
+// SetSendCompress sets the compression algorithm to the stream.
+func (s *Stream) SetSendCompress(str string) {
+	s.sendCompress = str
+}
+
+// Done returns a channel which is closed when it receives the final status
+// from the server.
+func (s *Stream) Done() <-chan struct{} {
+	return s.done
+}
+
+// Header returns the header metadata of the stream.
+//
+// On client side, it acquires the key-value pairs of header metadata once it is
+// available. It blocks until i) the metadata is ready or ii) there is no header
+// metadata or iii) the stream is canceled/expired.
+//
+// On server side, it returns the out header after t.WriteHeader is called.
+func (s *Stream) Header() (metadata.MD, error) {
+	if s.headerChan == nil && s.header != nil {
+		// On server side, return the header in stream. It will be the out
+		// header after t.WriteHeader is called.
+		return s.header.Copy(), nil
+	}
+	err := s.waitOnHeader()
+	// Even if the stream is closed, header is returned if available.
+	select {
+	case <-s.headerChan:
+		if s.header == nil {
+			return nil, nil
+		}
+		return s.header.Copy(), nil
+	default:
+	}
+	return nil, err
+}
+
+// TrailersOnly blocks until a header or trailers-only frame is received and
+// then returns true if the stream was trailers-only.  If the stream ends
+// before headers are received, returns true, nil.  If a context error happens
+// first, returns it as a status error.  Client-side only.
+func (s *Stream) TrailersOnly() (bool, error) {
+	err := s.waitOnHeader()
+	if err != nil {
+		return false, err
+	}
+	// if !headerDone, some other connection error occurred.
+	return s.noHeaders && atomic.LoadUint32(&s.headerDone) == 1, nil
+}
+
+// Trailer returns the cached trailer metedata. Note that if it is not called
+// after the entire stream is done, it could return an empty MD. Client
+// side only.
+// It can be safely read only after stream has ended that is either read
+// or write have returned io.EOF.
+func (s *Stream) Trailer() metadata.MD {
+	c := s.trailer.Copy()
+	return c
+}
+
+// ContentSubtype returns the content-subtype for a request. For example, a
+// content-subtype of "proto" will result in a content-type of
+// "application/grpc+proto". This will always be lowercase.  See
+// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
+// more details.
+func (s *Stream) ContentSubtype() string {
+	return s.contentSubtype
+}
+
+// Context returns the context of the stream.
+func (s *Stream) Context() context.Context {
+	return s.ctx
+}
+
+// Method returns the method for the stream.
+func (s *Stream) Method() string {
+	return s.method
+}
+
+// Status returns the status received from the server.
+// Status can be read safely only after the stream has ended,
+// that is, after Done() is closed.
+func (s *Stream) Status() *status.Status {
+	return s.status
+}
+
+// SetHeader sets the header metadata. This can be called multiple times.
+// Server side only.
+// This should not be called in parallel to other data writes.
+func (s *Stream) SetHeader(md metadata.MD) error {
+	if md.Len() == 0 {
+		return nil
+	}
+	if s.isHeaderSent() || s.getState() == streamDone {
+		return ErrIllegalHeaderWrite
+	}
+	s.hdrMu.Lock()
+	s.header = metadata.Join(s.header, md)
+	s.hdrMu.Unlock()
+	return nil
+}
+
+// SendHeader sends the given header metadata. The given metadata is
+// combined with any metadata set by previous calls to SetHeader and
+// then written to the transport stream.
+func (s *Stream) SendHeader(md metadata.MD) error {
+	return s.st.WriteHeader(s, md)
+}
+
+// SetTrailer sets the trailer metadata which will be sent with the RPC status
+// by the server. This can be called multiple times. Server side only.
+// This should not be called parallel to other data writes.
+func (s *Stream) SetTrailer(md metadata.MD) error {
+	if md.Len() == 0 {
+		return nil
+	}
+	if s.getState() == streamDone {
+		return ErrIllegalHeaderWrite
+	}
+	s.hdrMu.Lock()
+	s.trailer = metadata.Join(s.trailer, md)
+	s.hdrMu.Unlock()
+	return nil
+}
+
+func (s *Stream) write(m recvMsg) {
+	s.buf.put(m)
+}
+
+// Read reads all p bytes from the wire for this stream.
+func (s *Stream) Read(p []byte) (n int, err error) {
+	// Don't request a read if there was an error earlier
+	if er := s.trReader.(*transportReader).er; er != nil {
+		return 0, er
+	}
+	s.requestRead(len(p))
+	return io.ReadFull(s.trReader, p)
+}
+
+// tranportReader reads all the data available for this Stream from the transport and
+// passes them into the decoder, which converts them into a gRPC message stream.
+// The error is io.EOF when the stream is done or another non-nil error if
+// the stream broke.
+type transportReader struct {
+	reader io.Reader
+	// The handler to control the window update procedure for both this
+	// particular stream and the associated transport.
+	windowHandler func(int)
+	er            error
+}
+
+func (t *transportReader) Read(p []byte) (n int, err error) {
+	n, err = t.reader.Read(p)
+	if err != nil {
+		t.er = err
+		return
+	}
+	t.windowHandler(n)
+	return
+}
+
+// BytesReceived indicates whether any bytes have been received on this stream.
+func (s *Stream) BytesReceived() bool {
+	return atomic.LoadUint32(&s.bytesReceived) == 1
+}
+
+// Unprocessed indicates whether the server did not process this stream --
+// i.e. it sent a refused stream or GOAWAY including this stream ID.
+func (s *Stream) Unprocessed() bool {
+	return atomic.LoadUint32(&s.unprocessed) == 1
+}
+
+// GoString is implemented by Stream so context.String() won't
+// race when printing %#v.
+func (s *Stream) GoString() string {
+	return fmt.Sprintf("<stream: %p, %v>", s, s.method)
+}
+
+// state of transport
+type transportState int
+
+const (
+	reachable transportState = iota
+	closing
+	draining
+)
+
+// ServerConfig consists of all the configurations to establish a server transport.
+type ServerConfig struct {
+	MaxStreams            uint32
+	AuthInfo              credentials.AuthInfo
+	InTapHandle           tap.ServerInHandle
+	StatsHandler          stats.Handler
+	KeepaliveParams       keepalive.ServerParameters
+	KeepalivePolicy       keepalive.EnforcementPolicy
+	InitialWindowSize     int32
+	InitialConnWindowSize int32
+	WriteBufferSize       int
+	ReadBufferSize        int
+	ChannelzParentID      int64
+	MaxHeaderListSize     *uint32
+}
+
+// NewServerTransport creates a ServerTransport with conn or non-nil error
+// if it fails.
+func NewServerTransport(protocol string, conn net.Conn, config *ServerConfig) (ServerTransport, error) {
+	return newHTTP2Server(conn, config)
+}
+
+// ConnectOptions covers all relevant options for communicating with the server.
+type ConnectOptions struct {
+	// UserAgent is the application user agent.
+	UserAgent string
+	// Dialer specifies how to dial a network address.
+	Dialer func(context.Context, string) (net.Conn, error)
+	// FailOnNonTempDialError specifies if gRPC fails on non-temporary dial errors.
+	FailOnNonTempDialError bool
+	// PerRPCCredentials stores the PerRPCCredentials required to issue RPCs.
+	PerRPCCredentials []credentials.PerRPCCredentials
+	// TransportCredentials stores the Authenticator required to setup a client
+	// connection. Only one of TransportCredentials and CredsBundle is non-nil.
+	TransportCredentials credentials.TransportCredentials
+	// CredsBundle is the credentials bundle to be used. Only one of
+	// TransportCredentials and CredsBundle is non-nil.
+	CredsBundle credentials.Bundle
+	// KeepaliveParams stores the keepalive parameters.
+	KeepaliveParams keepalive.ClientParameters
+	// StatsHandler stores the handler for stats.
+	StatsHandler stats.Handler
+	// InitialWindowSize sets the initial window size for a stream.
+	InitialWindowSize int32
+	// InitialConnWindowSize sets the initial window size for a connection.
+	InitialConnWindowSize int32
+	// WriteBufferSize sets the size of write buffer which in turn determines how much data can be batched before it's written on the wire.
+	WriteBufferSize int
+	// ReadBufferSize sets the size of read buffer, which in turn determines how much data can be read at most for one read syscall.
+	ReadBufferSize int
+	// ChannelzParentID sets the addrConn id which initiate the creation of this client transport.
+	ChannelzParentID int64
+	// MaxHeaderListSize sets the max (uncompressed) size of header list that is prepared to be received.
+	MaxHeaderListSize *uint32
+}
+
+// TargetInfo contains the information of the target such as network address and metadata.
+type TargetInfo struct {
+	Addr      string
+	Metadata  interface{}
+	Authority string
+}
+
+// NewClientTransport establishes the transport with the required ConnectOptions
+// and returns it to the caller.
+func NewClientTransport(connectCtx, ctx context.Context, target TargetInfo, opts ConnectOptions, onPrefaceReceipt func(), onGoAway func(GoAwayReason), onClose func()) (ClientTransport, error) {
+	return newHTTP2Client(connectCtx, ctx, target, opts, onPrefaceReceipt, onGoAway, onClose)
+}
+
+// Options provides additional hints and information for message
+// transmission.
+type Options struct {
+	// Last indicates whether this write is the last piece for
+	// this stream.
+	Last bool
+}
+
+// CallHdr carries the information of a particular RPC.
+type CallHdr struct {
+	// Host specifies the peer's host.
+	Host string
+
+	// Method specifies the operation to perform.
+	Method string
+
+	// SendCompress specifies the compression algorithm applied on
+	// outbound message.
+	SendCompress string
+
+	// Creds specifies credentials.PerRPCCredentials for a call.
+	Creds credentials.PerRPCCredentials
+
+	// ContentSubtype specifies the content-subtype for a request. For example, a
+	// content-subtype of "proto" will result in a content-type of
+	// "application/grpc+proto". The value of ContentSubtype must be all
+	// lowercase, otherwise the behavior is undefined. See
+	// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests
+	// for more details.
+	ContentSubtype string
+
+	PreviousAttempts int // value of grpc-previous-rpc-attempts header to set
+}
+
+// ClientTransport is the common interface for all gRPC client-side transport
+// implementations.
+type ClientTransport interface {
+	// Close tears down this transport. Once it returns, the transport
+	// should not be accessed any more. The caller must make sure this
+	// is called only once.
+	Close() error
+
+	// GracefulClose starts to tear down the transport. It stops accepting
+	// new RPCs and wait the completion of the pending RPCs.
+	GracefulClose() error
+
+	// Write sends the data for the given stream. A nil stream indicates
+	// the write is to be performed on the transport as a whole.
+	Write(s *Stream, hdr []byte, data []byte, opts *Options) error
+
+	// NewStream creates a Stream for an RPC.
+	NewStream(ctx context.Context, callHdr *CallHdr) (*Stream, error)
+
+	// CloseStream clears the footprint of a stream when the stream is
+	// not needed any more. The err indicates the error incurred when
+	// CloseStream is called. Must be called when a stream is finished
+	// unless the associated transport is closing.
+	CloseStream(stream *Stream, err error)
+
+	// Error returns a channel that is closed when some I/O error
+	// happens. Typically the caller should have a goroutine to monitor
+	// this in order to take action (e.g., close the current transport
+	// and create a new one) in error case. It should not return nil
+	// once the transport is initiated.
+	Error() <-chan struct{}
+
+	// GoAway returns a channel that is closed when ClientTransport
+	// receives the draining signal from the server (e.g., GOAWAY frame in
+	// HTTP/2).
+	GoAway() <-chan struct{}
+
+	// GetGoAwayReason returns the reason why GoAway frame was received.
+	GetGoAwayReason() GoAwayReason
+
+	// IncrMsgSent increments the number of message sent through this transport.
+	IncrMsgSent()
+
+	// IncrMsgRecv increments the number of message received through this transport.
+	IncrMsgRecv()
+}
+
+// ServerTransport is the common interface for all gRPC server-side transport
+// implementations.
+//
+// Methods may be called concurrently from multiple goroutines, but
+// Write methods for a given Stream will be called serially.
+type ServerTransport interface {
+	// HandleStreams receives incoming streams using the given handler.
+	HandleStreams(func(*Stream), func(context.Context, string) context.Context)
+
+	// WriteHeader sends the header metadata for the given stream.
+	// WriteHeader may not be called on all streams.
+	WriteHeader(s *Stream, md metadata.MD) error
+
+	// Write sends the data for the given stream.
+	// Write may not be called on all streams.
+	Write(s *Stream, hdr []byte, data []byte, opts *Options) error
+
+	// WriteStatus sends the status of a stream to the client.  WriteStatus is
+	// the final call made on a stream and always occurs.
+	WriteStatus(s *Stream, st *status.Status) error
+
+	// Close tears down the transport. Once it is called, the transport
+	// should not be accessed any more. All the pending streams and their
+	// handlers will be terminated asynchronously.
+	Close() error
+
+	// RemoteAddr returns the remote network address.
+	RemoteAddr() net.Addr
+
+	// Drain notifies the client this ServerTransport stops accepting new RPCs.
+	Drain()
+
+	// IncrMsgSent increments the number of message sent through this transport.
+	IncrMsgSent()
+
+	// IncrMsgRecv increments the number of message received through this transport.
+	IncrMsgRecv()
+}
+
+// connectionErrorf creates an ConnectionError with the specified error description.
+func connectionErrorf(temp bool, e error, format string, a ...interface{}) ConnectionError {
+	return ConnectionError{
+		Desc: fmt.Sprintf(format, a...),
+		temp: temp,
+		err:  e,
+	}
+}
+
+// ConnectionError is an error that results in the termination of the
+// entire connection and the retry of all the active streams.
+type ConnectionError struct {
+	Desc string
+	temp bool
+	err  error
+}
+
+func (e ConnectionError) Error() string {
+	return fmt.Sprintf("connection error: desc = %q", e.Desc)
+}
+
+// Temporary indicates if this connection error is temporary or fatal.
+func (e ConnectionError) Temporary() bool {
+	return e.temp
+}
+
+// Origin returns the original error of this connection error.
+func (e ConnectionError) Origin() error {
+	// Never return nil error here.
+	// If the original error is nil, return itself.
+	if e.err == nil {
+		return e
+	}
+	return e.err
+}
+
+var (
+	// ErrConnClosing indicates that the transport is closing.
+	ErrConnClosing = connectionErrorf(true, nil, "transport is closing")
+	// errStreamDrain indicates that the stream is rejected because the
+	// connection is draining. This could be caused by goaway or balancer
+	// removing the address.
+	errStreamDrain = status.Error(codes.Unavailable, "the connection is draining")
+	// errStreamDone is returned from write at the client side to indiacte application
+	// layer of an error.
+	errStreamDone = errors.New("the stream is done")
+	// StatusGoAway indicates that the server sent a GOAWAY that included this
+	// stream's ID in unprocessed RPCs.
+	statusGoAway = status.New(codes.Unavailable, "the stream is rejected because server is draining the connection")
+)
+
+// GoAwayReason contains the reason for the GoAway frame received.
+type GoAwayReason uint8
+
+const (
+	// GoAwayInvalid indicates that no GoAway frame is received.
+	GoAwayInvalid GoAwayReason = 0
+	// GoAwayNoReason is the default value when GoAway frame is received.
+	GoAwayNoReason GoAwayReason = 1
+	// GoAwayTooManyPings indicates that a GoAway frame with
+	// ErrCodeEnhanceYourCalm was received and that the debug data said
+	// "too_many_pings".
+	GoAwayTooManyPings GoAwayReason = 2
+)
+
+// channelzData is used to store channelz related data for http2Client and http2Server.
+// These fields cannot be embedded in the original structs (e.g. http2Client), since to do atomic
+// operation on int64 variable on 32-bit machine, user is responsible to enforce memory alignment.
+// Here, by grouping those int64 fields inside a struct, we are enforcing the alignment.
+type channelzData struct {
+	kpCount int64
+	// The number of streams that have started, including already finished ones.
+	streamsStarted int64
+	// Client side: The number of streams that have ended successfully by receiving
+	// EoS bit set frame from server.
+	// Server side: The number of streams that have ended successfully by sending
+	// frame with EoS bit set.
+	streamsSucceeded int64
+	streamsFailed    int64
+	// lastStreamCreatedTime stores the timestamp that the last stream gets created. It is of int64 type
+	// instead of time.Time since it's more costly to atomically update time.Time variable than int64
+	// variable. The same goes for lastMsgSentTime and lastMsgRecvTime.
+	lastStreamCreatedTime int64
+	msgSent               int64
+	msgRecv               int64
+	lastMsgSentTime       int64
+	lastMsgRecvTime       int64
+}
+
+// ContextErr converts the error from context package into a status error.
+func ContextErr(err error) error {
+	switch err {
+	case context.DeadlineExceeded:
+		return status.Error(codes.DeadlineExceeded, err.Error())
+	case context.Canceled:
+		return status.Error(codes.Canceled, err.Error())
+	}
+	return status.Errorf(codes.Internal, "Unexpected error from context packet: %v", err)
+}